Archives August 2015

MAKITA EY2650H – PETROL CHAIN SAW MACHINE

EY2650H

MAKITA EY2650H – PETROL PRUNNING CHAIN SAW MACHINE 25.4cc

The latest professional pole-saw recently added to the expanding Makita Outdoor Power Equipment range extends telescopically to enable branches up to five metres above ground to be lopped with ease. The new Makita EY2650H pole expands from 2.72-metres to 3.92-metres making this the longest pole-saw on the market. The aluminium outer pole tube is 35mm in diameter with 2mm wall thickness. This rugged construction minimises the pole flexing, thus giving the greatest possible chain bar stability and overall control of the pole-saw in action. The 25.5cm guide bar carries 3/8” pitch ½” chain that will run up to 21m/s. The chain oil tank is mounted to the chain drive transmission housing and has an adjustable oil delivery pump. The pole sections are locked in the chosen length by a rugged turn-lock for maximum safety and the EY2650 has a useful 0.6 litre fuel tank capacity.

The new Makita EY2650 professional pole-saw is powered by a 25.4cc version of the latest Makita MM4, 4-stroke engine developing 1.1hp. The Makita MM4 engine range is responsible for expanding Makita’s petrol machines market share as contractors recognise the values of pure 4-stroke engines for economy, power, low noise and emissions. The elimination of the need for oil mixing as required for 2-stroke engines dramatically reduces running costs and at the same time removes the risk of engine damage from incorrect oil application. The Makita MM4 engine has a fully pressurised oil flow system that enables the machine to operate at any angle.

Weighing just 7.2kg the new Makita EY2650 pole-saw is substantially lighter than other similar tools available, is comfortable to use and is supplied

 

Telescopic petrol pole saw loaded with a 25.4mL Makita 4-stroke engine.
  • Lightweight pole saw head for reduced operator fatigue.
  • In compliance with main exhaust emission regulations, including the regulations of San Dimas.
  • Multi-position lubrication system enables the engine to be inclined to any angle for continuous operation without emission of the white smoke and the smell of burning engine oil.
Displacement 25.4mL
Engine power 0.77kW/1.1PS
Fuel tank 0.6L
Guide bar length 255mm (10″)
Saw chain Gauge: 1.3mm (0.050″)
Pitch: 3/8″
Overall length 1773mm (69-3/4”)
Net weight 6.6kg (14.6lbs)

MAKITA UC3030A – CHAIN SAW MACHINE

UC3030A

MAKITA UC3030A – LIGHT WEIGHT CHAIN SAW MACHINE 304mm / 1800w

FEATURES

Ergonomically Positioned Loop Handle

Increases maneuverability and makes horizontal cutting easier.

Front and Rear Handles with Rubberized Soft Grip

Large switch lever with Soft Start and Current Limiter

Soft start function minimizes start-up shock.
Current limiter protects motor from burn-out by cutting off the power to motor when overloaded.

A. Large Separate-type Metal Spike Bumper

Creates a stable pivot on wood for steady cutting.

B. Large View Window of Oil Tank

Allows operator to easily check oil level.

Increased Oil Tank Capacity up to 140ml

Toolless Blade Change and Adjustment

Without removing sprocket cover,
blade change and adjustment can be done.

1. Simply turn this knob to adjust the tension of chain blade.

2. Merely by turning this lever, guide bar and chain blade can be replaced.

SPECIFICATION

Continuous rating Input 1,800W
Chain speed per minute 800m (2,600ft)
Guide bar length 300mm (12″) : UC3030A
350mm (14″) : UC3530A
400mm (16″) : UC4030A
450mm (18″) : UC4530A
Chain Blade pitch : 3/8″
gauge : 0.050″
Chain oil tank 0.14L
Dimensions
(L x W x H)
492 x 201 x 220mm
(19-3/8″ x 7-7/8″ x 8-5/8″ )
Net weight 4.4kg (9.7lbs)
Power supply cord 0.3m (0.98ft)

 

Net weight, Dimensions : without blade and guide bar
Standard equipment and Specifications may differ by country or area.

MAKITA SJ401 – SCROLL SAW 50mm

SJ401

MAKITA SJ401 – SUPER DUTY SCROLL SAW 50mm / 50w

Continuous rating input 50W
Capacity Thickness of cut:
50mm
Throat: 406mm (16”)
Length of stroke 18mm (11/16”)
Stroke per mintue 400-1,600spm
Overall length 600mm (23-5/8”)
Net weight 14.1kg (31lbs)
 

Bevel cuts up to 45 degrees to the left and 15 degrees to the right.

  • Tool-free blade change system.
  • Quick adjustment of blade tension thanks to blade tension lever.
  • Sturdy cast iron blade for stability and less-vibration cutting.

MAKITA LS1040 – PORTABLE MITTER SAW

LS1040

MAKITA LS1040 – PORTABLE MITTER SAW 80 TCT ALUMINIUM BLADE 255mm / 1650w

Powerful 15 AMP motor for improved performance
  • Dual post compound pivoting arm
  • Bevel cuts up to 45° to the left
  • Miter cuts 0-45° left and 0-52° right
  • Positive stops at 9 settings; 15°, 22.5°, 30°, 45°, right or left and 0° (90° cuts)
  • Weighs only 24.2 lbs. for easy portability
  • Precision machined aluminum base ensures accurate cuts
  • Performs compound cutting operations
  • Shaft lock for easy blade changes
  • Includes 10″ 40 tooth carbide tipped blade

FEATURES

  • Bevel cuts to 45 degrees left.
  • Pivoting fence provide efficient support to stock.
  • LS1040F : Fluorescent lamp on flexible arm.

SPECIFICATION

Continuous rating Input 1,650W
Capacity at 90 degrees 90.5mm x 95mm (3-9/16″ x 3-3/4″)
at 45 degrees 90.5mm x 67mm (3-9/16″ x 2-5/8″)
Blade diameter 255mm – 260mm (10″- 10-1/4″)
No load speed (rpm) 4,600
Dimensions
(L x W x H)
530mm x 532mm x 476mm
(20-7/8″ x 21″ x 18-3/8″)
Net weight 11.6kg (22.5lbs)
Power supply cord 2.5m (8.2ft)

 

 

MAKITA HM0810 – PERCUSSION HAMMER

HM0810

MAKITA HM0810 – LIGHT WEIGHT PERCUSSION HAMMER 2900ipm / 1100w

FEATURES

  • Compact and lightweight for maximum control.

  • Soft rubber grip side handle and anti-vibration spring on rear handle for reduced operator fatigue.

  • Easy to grip round shape barrel protected by rubber cover.

SPECIFICATION

Continuous rating Input 900W
Blows per minute 2,900bpm
Overall length 410mm (16-1/8″)
Net weight 5.3kg (11.7lbs)
Power supply cord 5.0m (16.4ft)

 

MAKITA HR2230 – SDS ROTARY HAMMER 24mm

HR2230

MAKITA HR2230 – BEST SELECTION SDS ROTARY HAMMER 24mm / 780w

 

FEATURES

High durability

• Added durability to impact bolt

• Large seal ring eliminates grease leakage from matching surface between inner housing and gear housing.

• Varnish on armature protects from dust and wire-breakage.

Rotation reversing system using brush holder unit

• Protects Carbon Brush from foreign dusts and debris.
• Life of Carbon Brush is 2.7 times long as the existing models.
• Same speed and torque even in reverse rotation
• Saves time and labor for repair thanks to simplified wiring.

Dual operation modes

Rotation + Hammering with Rotation

One-touch sliding chuck

For easy bit changes

Torque limiter

When drill bit hits against reinforcements, torque limiter operates to stop.

No hammering when Idling

Ensures machine’s long life.

1. Lock-on button

For continuous operation

2. Variable speed

Bumper

Protects the surface of workpiece and machine.

Rubberized grip

Provides more control and comfort.

SPECIFICATION

Continuous rating Input 710W
Capacity Concrete : 22mm (7/8″)
Steel : 13mm (1/2″)
Wood : 32mm (1-1/4″)
Impacts per minute 0 – 4,050ipm
No load speed 0-1,050rpm
Dimensions
(L x W x H)
357 x 84 x 214mm
(14″ x 3-5/16″ x 8-3/8″)
Net weight 2.4kg (5.4lbs)
Power supply cord 2.5m (8.2ft)

 

Standard equipment and Specifications may differ by country or area.

 

MAKITA HP2050 – HAMMER DRILL 20mm

HP2050

MAKITA HP2050 – LIGHT & EASY HAMMER DRILL 20mm / 720w

Powerful 6.6 AMP motor and lightest tool on the market (5.1 lbs.)
  • 2-Modes: hammering with rotation and rotation only
  • Positive Stop Mode Selctor prevents accidental mode disengagement
  • Built-in Torque Limiter stops bit rotation when hitting reinforcement to prevent kick-back
  • Large trigger switch and 360° swivel side handle for added comfort
  • Recessed lock-on button for continuous use
  • Ball bearing construction for longer motor life
  • Ergonomic and well balanced design with rubberized grip for comfort and control reducing operator fatigue
  • Air vent holes supply required ventilation while protecting motor from dust and dirt
Concrete 20mm (3/4″)
Steel Hi: 8mm (5/16″)
Lo: 13mm (1/2″)
Wood Hi: 25mm (1″)
Lo: 40mm (1-9/16″)
Input 720W
Blow per minute Hi: 0-58,000bpm
Lo: 0-24,000bpm
No load speed Hi: 0-2,900rpm
Lo: 0-1,200rpm
Overall length 360mm (14-1/8″)
Net weight 2.3kg (5.1lbs)
Power supply cord 2m (6.6ft.)

 

NITTO KOHKI NK CUPLA HOSE

NK CUPLA HOSE

 

DS-NK CUPLA HOSE

 

Hi Cupla Ace socket with polyurethane hoses are now standard stock items.
Push-to-connect design for quick piping.

  • The Hi Cupla Ace is mounted on pliable polyurethane hose featuring excellent durability and wear resistance with hose guard nut to prevent possible kinking.
  • Pressure rating of these plastic sockets are comparable to steel.
  • A built-in “ automatic lock mechanism” to lock the sleeve when connected, thus prevents accidental detachment.
  • Just push plug into socket for simple connection.
  • Plastic body will cause minimum risk of damage even in contact with tools or equipment.
  • Fluid may flow in either direction from plug or from socket side when coupled.
  • Polyurethane hoses minimize stiffening in cold environment, and the surface does not become sticky even when covered with oil.
  • Spiral polyurethane coil hoses processed from straight tube have selfrecoiling feature.
  • Various hose lengths are available.

DS2-NK CUPLA HOSE

CIGWELD REGULATOR OXYGEN COMET EDGE ESS4

CIGWELD REGULATOR OXYGEN COMET EDGE 310657

COMET EDGE ESS4 Oxygen Regulator with GasGuard 1000kPa

Features

  • The most advanced regulator design introduced to the market in 20 years.
  • Incorporating our Encapsulated Seat Technology (EST) which offers precise pressure and flow control.
  • Regulators are colour coded for easy gas identification.
  • Easy to read gauges incorporating coloured segments to assist with setting correct operation pressures.
  • GasGuard™ nipple ensures total gas shut off in the event that the inlet connection is broken.
  • Built-in Gauge Guard.
  • Independently certified to AS4267.

Specifications

  • Max. Outlet Pressure (kPa): 1000
  • Gauge Range Inlet (kPa): 30000
  • Gauge Range Outlet (kPa): 1600
  • Inlet Connection: AS 2473 Type 10.5  (5/8″ BSP RH Ext) Vertical inlet
  • Outlet Connection: 5/8″ UNF RH Ext