Archives March 2016

MAKITA DUH651RM2 HEDGE TRIMMER

DUH651RM2

  • Well balanced and ergonomic design; weighs only 5.2kg with (2) 18V batteries
  • 5-position rotating rear handle for increased comfort during vertical and angle trimming
  • Two-handed operation; tool is activated only when the trigger and top handle are engaged
  • L.E.D. battery gauge indicates charge level
  • Electric brake for increased productivity
  • Heavy duty gear case for improved durability
  • Cordless for instant start-up, zero emissions and reduced maintenance

 

Specifications
Blade length 650mm
Strokes per min 2,000-3,600spm
Overall dimensions 1,135mm
Net weight 5.2kg
Voltage 36V
Carbon brush 442

Electric Water Heater Elterra 15 Liter

Produk Detail Elterra 15 Liter Water Heater
elterra

Elterra Water Heater Hadir untuk menjawab akan kebutuhan air panas dengan cepat, mudah, serta fleksibel, nikmati air panas untuk keluarga kapanpun Anda butuhkan tanpa perlu menunggu waktu pemanasan yang lama. Handal Elterra hadir pula dengan tipe 15 Liter untuk keluarga Anda.

  • Teknologi baru pemanasan air dengan cepat.
  • Magnesium anode untuk perlindungan air dan elemen dan tangki dari karat dan zat kapur.
  • Tangki air Galvanized Enamel yang super kuat.
  • Element pemanas dari Stainless Steel.
  • Pengaman pada saat suhu tinggi dengan thermostat anti overheat.
  • Perlindungan dari terbakar dan anti kering.
  • Insulasi tinggi dari Polyurithane yang dipadatkan untuk menjaga panas dalam tangki tetap stabil tidak heat lost.
Spesification Elterra 15 Liter Water Heater

 

Model ES 15 / HE 15 G
Capacity 15 Liter
Dimension W 380 x H 380 x L 370
Weight 9.3 Kg
Voltage 220 – 240 V
Power 350 Watt
Adjustable Water Temp Ambient to 75 Celcius
Rate Pressure 0.75 MPa

 

KETERANGAN :

1. HARGA TIDAK TERMASUK PEMASANGAN

2. HARGA TERSEBUT HANYA MENCAKUP UNIT

3. GARANSI PRODUK SELAMA SATU TAHUN

 

ELTERRA Electric Water Heater

electra banner

Elterra Elektrik Water Heater hadir untuk menjawab akan kebutuhan air panas dengan cepat, mudah serta fleksible, nikmati air panas untuk keluarga Anda kapanpun Anda butuhkan tanpa perlu menunggu waktu pemanasan yang lama.
Elterra Elektrik Water Heater hadir dengan beragam tipe untuk keluarga Anda 15 Ltr, 35 Ltr, 50 Ltr serta 80 Ltr.

Kenapa Eletrra Water Heater ?

1. Teknologi baru pemanas air lebih cepat.
2. Magnesium anode untuk perlindungan air dan tangki dari karat dan zat kapur.
3. Tangki air Galvanized Enamel yang super kuat.
4. Element pemanas Stainless steel.
5. Pengamanan pada saat suhu tinggi dengan thermostat anti overheat.
6. Perlindungan dari terbakar dan anti kering.
7. Insulasi tinggi dari poliuretan yang dipadatkan untuk menjaga panas dalam tangki tetap stabil.

elterra

Indikator Air Panas
Mendapatkan suhu yang tepat sesuai dengan kenyamanan Anda.
Tombol Pengatur Suhu
Kemudahan dalam mendapatkan sensasi air panas yang diinginkan.
3-Stage Heating
Kemudahan mengatur daya yang dibutuhkan 500 w/ 1000 w/ 1500 w
ELCB Control
Alat anti kebocoran listrik otomatis menghindari konsleting.

 

grafik_elterra

 

 

 

 

PAGAR BRC FENCE

pagar-brc

Pagar BRC (Galvanized Fence) adalah pagar siap pasang terbuat dari material besi U-50 yang sangat praktis dan berpenampilan menarik.  Lembaran pagar ini dibentuk dahulu, kemudian dilapisi galbani dengan cara  hot dip (celup panas 465ºC) atau electroplating, sehingga terjamin ketahanannya terhadap bahaya korosi/karat. Anda tidak perlu melakukan perawatan maupun pengecatan ulang untuk jangka waktu yang lama karena kualitas galbaninya yang unggul.

>> Keunggulan (Advantages) :

  • Tahan karat (Bebas perawatan)
  • Praktis (Pemasangan mudah)
  • Ekonomis (Harga produk dan pemasangan relatif lebih murah)
  • Aman (Kuat dan berfungsi sebagai security fence dengan baik)
  • Fleksible (Dapat direlokasi ke area lain tanpa merusak pagar)
  • Desain minimalis (Penampilan yang menarik, simple, dan minimalis)

>> Peruntukan (Applications):
Berfungsi sebagai pagar pengaman/pembatas untuk berbagai property seperti:

  • Rumah tinggal / Perumahan / Taman
  • Pertokoan / Perkantoran
  • Pabrik / Pergudangan
  • Pelabuhan / Depo Kontainer
  • Lapangan olah raga / Sekolah / Bandara Udara
  • Tower BTS / Berbagai Proyek
  • Dll

 

>> Spesifikasi dan Ukuran Pagar BRC (Galvanized Fence)

No Pagar Tiang Finishing
Tinggi (cm) Panjang (cm) Diameter (mm) Tinggi (cm) Diameter (inch) Galvanized
1 90 240 6 / 7 / 8 120 1,5 / 2,0 Electroplating / Hot Dip
2 120 240 6 / 7 / 8 150 1,5 / 2,0 Electroplating / Hot Dip
3 150 240  6 / 7 / 8 175 1,5 / 2,0 Electroplating / Hot Dip
4 175 240 6 / 7 / 8 200/225 1,5 / 2,0 Electroplating / Hot Dip
5 190 240 6 / 7 / 8 225/240 1,5 / 2,0 Electroplating / Hot Dip
6 240 240 6 / 7 / 8 300 2,0 Electroplating / Hot Dip
7 240 6 / 7 / 8 1,5 / 2,0 Electroplating / Hot Dip

 

>> Finishing Galvanized, tersedia dalam 2 pilihan galvanized/galbani, yaitu:

  • Hot Dip Galvanized (permukaan lebih kasar; ketahanan terhadap korosi 8-10 tahun; bisa dilampiri sertifikat galvanis hot dip)
  • Electroplating / UCP Galvanized (permukaan lebih halus; ketahanan terhadap korosi 2-4 tahun)

pagar brc _01

Keterangan Teknis Pagar BRC® Tebal Galbani-Hot Dip (Mikron; average)
Pagar 75
Tiang / Rangka pintu
Tebal pipa baja min.2 mm dan max. 2,3 mm
75
Tutup Tiang Baja
Terbuat dari pelat baja setebal 2 mm
75
U Clip
Terbuat dari pelat baja setebal 1,2 mm
50 – 75
Mur / Baut 50 – 75
Angkur (Jeruji)
Terbuat dari baja mutu U-50, dia.6 mm dan 7 mm
75

 

>> Keuntungan Galvanizing :

  • Melindungi besi atau baja (pagar) terhadap karat dalam jangka waktu yang lama
  • Tidak memerlukan biaya pemeliharaan
  • Tidak memerlukan pengecatan (pengecatan bisa dilakukan jika menginginkan warna tetentu, selera)
  • Melindungi permukaan besi atau baja (pagar, tiang dan pintu) terhadap goresan
  • Proses instalasi cepat, praktis, dan ekonomis

 

 

BRC WIREMESH

Welded Steel Wire Mesh (BRC) / Reinforcement Wire Mesh

  • Conformed with MS 145:2001 & Ms 145:2006
  • Steel Reinforcement material
  • Used to replacing the traditional “Cut & Bend” and placing of steel thermo-mechanical treated bars
  • Offer better strength, integration and longer work time compared with other wire mesh products
  • Mesh in an electric fusion welded prefabricated reinforcement consisting of a series of parallel longitudinal; wires with accurate spacing welded to cross wires at the required spacing.
  • Better anchorage & crack control
  • Able transfer strength & bond strength
  • Any kinds of specification are decided by customer’s requirement (Cut-To-Size / Bending are available)

 

APPLICATION

  • Reinforcing steel is necessary in practically all types of concrete construction. Concrete is weak in tension; consequently, reinforcement must be used to purpose because high yield strength cold-drawn wires of small size and close spacing can be combined to provide well distributed tensile reinforcement that is entirely adequate and economical .

 

ADVANTAGES OF BRC Welded Wire Mesh

(1) Less steel required.

Due to higher working stress allowed in building codes, standard specifications for welded wire mesh made from cold drawn wire , a saving is made in steel purchased, transported. Handled and installed.

(2) Uniform steel distribution.

Welded wire mesh provides proper distribution of steel reinforcing throughout the concrete slab. It has smaller steel members that are closely and uniformly spaced, and accurately placed at all points of maximum stress. This typed of reinforcement distributes load stresses widely and equally throughout the concrete slab.

(3) Design requirements may be accurately fulfilled.

Welded wire mesh is available in a wide range of styles to meet accurate design requirements. The reinforcement is prefabricated in the factory, preventing omission or misplacement of steel in the fields.

(4) Quickly and economically placed.

No laying of single bars, cutting bending and knotting of single bars needed. A saving in installation labor expense is made possible by a reinforcement furnished to the job in sheets, which are easily and speedily placed in the desired position.


TECHNICAL DATA

RAW MATERIAL – Our steel wire rod is purchased from Hadeed Jubail (Saudi Iron and steel Co.) Being a part of the International Group of BRC. British reinforced concrete, testing are performed in our laboratory to ensure the quality supplied meets the highest international standards.

WIRE MESH – Our BRC mesh is manufactured to meet BS4483, DIN 488, ASTMA 185 AND 497. Our Quality Control Department is equipped with the latest electronic equipment to ensure these high standards are maintained throughout all stages of manufacture. Test certificates are issued on request the minimum tensile achieved to cover the above standers are:

Yield Strength – 500 N/mm2

Ultimate Strength – 550 N/mm2

WIRE DIANETTERS – 4 mm – 12 mm

SPECIAL SHEETS – Where the quantity is sufficient to justify an economical production run, we can produce sheets in any width up to 3.2 meters and in any length up to 12 meters.

 

BRC Weldfence is manufactured from high tensile strength steel wires that are welded together by electrical fusion to provide accurate panel and mesh dimensions.

This fencing system is strong and easy to put up. The rolled top and bottom gives each individual panel perfect rigidity so that tensioning is not required.

BRC Weldfence offers flexibility for practical and aesthetic purposes. Individual panels can be easily replaced. The 50 mm spacing between vertical wires also enables the panels to be cut accurately for non- standard lengths and aesthetic purposes. Its durability reduces maintenance cost to a minimum.

This fencing system is able to retain its shape and strength for many years because it is pre-welded.

The fencing system comes complete with panels and fencing posts, in either hot dip galvanised or polyester powder coated. It is pre-drilled and ready for assembly on site.

Where it takes creativity and strength to outline the boundaries of commercial, industry, recreational or residential properties, the solution lies with BRC Weldfence. It’s simply better!

BRC Weldfence is manufactured in Singapore by BRC Asia Limited, established since 1938.

Standard Hot Dip Galvanised Weldfence – both panels and posts are dipped in molten zinc to maximize durability. Accessories are also hot dip galvanised.

Customised Gate and Fencing System – offers architects, contractors and the building owners a choice to fence up their premises with matching gates and fencing systems.

Polyester Powder Coated Weldfence – powder coated exterior of about 80 microns thick for added protection, as well as providing exciting colour choices for architects to select for their clients. Currently, seven colours are available.
Double – panel High Fencing Systems – ideally suited for sports and recreational complexes, and high security installations.
Alternative Fixing Systems – using base plates to mount on the existing retaining wall.
Security Weldfence – its strength and durability, and the ease of connection for electronic security devices make it a popular choice for security fencing.

IGGI TRUSS ATAP GALVALUME

JD-SATU

 

IGGI IS A LIGHTWEIGHT STEEL ROOF TRUST PRODUCTSAND OTHER PRODUCT WITH GALVALUME MATERIAL WITH A STRONG STRUCTURE AND THE STEEL GRADE G550 WITH LAYER OF ALM WAIT 55%.

Produk merek IGGI hanya menggunakan kualitas bahan baku terbaik Galvalume, galvalume galvanized dan prepainted. Dengan teknologi dan inovasi modern serta sumber daya manusia yang profesional. Produk ini mempunyai berbagai macam variant, seperti : Genteng Metal, Rangka atap Baja Ringan, Atap Bergelombang, Rangka Plafond Baja Ringan dan Metal Sistem, serta aksesories pengerjaan atap.

IGGI Truss diproduksi dengan mesin berteknologi tinggi dari material yang terjamin dan ringan guna mempermudah proses pemasangan, praktis dan cepat menggunakan sistem baut (Self Drilling Screw System), serta di tunjang ksatabilan profit, presisi dan keakuratan yang baik sehingga dapat menghemat waktu dan juga biaya.

 

IGGI-TRUSS

Rangka Atap Baja Ringan IGGI TRUSS

IGGI TRUSS menggunakana baja G550 dengan lapisan Aluminium 55%, Zinc 43%, Silikon 1.6% sesuai dengan Standar Internasional ASTM A792 yang telah melalui penelitian di laboratorium struktur dengan Standar ASTM ( American Society for Testing and Material) dan AISI ( American Iron and Steel Institute).

IGGI TRUSS menggunakan baja bermutu tinggi dengan Standar mutu Internasional G 550 A 792, memiliki struktur desain yang telah disempurnakan, dengan kestabilan dan keakuratan yang tinggi, simpel dan elegan.

Kenapa Anda harus menggunakan Atap baja ringan Ini?

  • Menggunakan mesin berteknologi tinggi.
  • Mudah dalam proses pemasangan.
  • Praktis dan cepat.

Keunggulan

1. Tahan Lama
  • Anti Rayap ( Life Time Warranty )
  • Tidak akan terjadi pelapukan.
  • Anti karat.
  • Tidak memuai.
2. Mutu Terjamin
  • Baja bermutu tinggi ( Standar Internasional G 550 A 792 ).
  • Struktur desain tulang yang telah disempurnakan.
  • Perhitungan aman dan terpercaya ( Komputerisasi).
  • Kestabilan Produk.
3. Efisien
  • Tim teknis yang memadai.
  • Mudah dalam pembuatan (pabrikasi) dan pemasangan.
  • Menghemat Waktu Anda.
  • Ramah Lingkungan ( Material daur ulang).

KARAKTERISTIK TEKNIS

Reng A
Panjang 6m x Tebal 0.43/0.53mm
Reng AA
Panjang 6m x Tebal 0.43/0.53mm
truss reng20a truss reng 20a1 truss reng20aa truss reng20aa
Reng AAA
Panjang 6m x Tebal 0.43mm
Reng AB
Panjang 6m x Tebal 0.43/0.53mm
truss reng20aaa truss reng20aaa truss reng20ab truss reng20a
Reng X
Panjang 6m x Tebal 0.43mm
Black Steel C100
  Panjang 6m x Tebal 2.2mm 
truss reng20x truss reng20x1 truss reng20x truss reng20x
Black Steel C125
 Panjang 6m x Tebal 2.2mm 
Canal 60
 Panjang 6m x Tebal 0.75/0.55mm 
truss reng20x truss reng20x truss reng20x truss reng20x
RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI PROFIL UK 100,Panjang 6 m
Tinggi 100 mm
Lebar Atas 40 mm
Lebar Sayap Kaki  16 mm
Tebal 1.05 mm
Tebal 0.75 mm
Tebal 0.55 mm

 

RANGKA ATAP BAJA RINGAN IGGI TRUSS
IGGI PROFIL UK 75, Panjang 6 m
Tinggi 75 mm
Lebar Atas 40 mm
Lebar Sayap Kaki 16 mm
Tebal 0.75 mm
Tebal 0.55 mm

 

RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI CANAL C 75, Panjang 6 m
Tinggi 75 mm
Lebar Sayap 35 mm
Tebal 1.05 mm
Tebal 0.75 mm
Tebal 0.65 mm
Tebal 0.55 mm

 

RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI RENG AA, Panjang 6 m
Tinggi 30 mm
Lebar Atas 32 mm
Lebar Sayap Kaki 12 mm
Tebal 0.55 mm
Tebal 0.45 mm
RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI RENG A, Panjang 6 m
Tinggi 25 mm
Lebar Atas 27 mm
Lebar Sayap Kaki 12 mm
Tebal 0.55 mm
Tebal 0.45 mm

 

RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI RENG AB, Panjang 6 m
Tinggi 30 mm
Lebar Atas 25 mm
Lebar Sayap Kaki 12 mm
Tebal 0.55 mm
Tebal 0.45 mm

 

RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI RENG X, Panjang 6 m
Tinggi 30 mm
Lebar Atas 13 mm
Lebar Sayap Kaki 14 mm
Tebal 0.45 mm

 

RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI PROFIL UK 75, Panjang 6 m
Tinggi 75 mm
Lebar Atas 40 mm
Lebar Sayap Kaki 16 mm
Tebal 0.75 mm
Tebal 0.55 mm

 

RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI CANAL C 75, Panjang 6 m
Tinggi 75 mm
Lebar Sayap 35 mm
Tebal 1.05 mm
Tebal 0.75 mm
Tebal 0.65 mm
Tebal 0.55 mm

 

RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI RENG AA, Panjang 6 m
Tinggi 30 mm
Lebar Atas 32 mm
Lebar Sayap Kaki 12 mm
Tebal 0.55 mm
Tebal 0.45 mm

 

RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI RENG A, Panjang 6 m
Tinggi 25 mm
Lebar Atas 27 mm
Lebar Sayap Kaki 12 mm
Tebal 0.55 mm
Tebal 0.45 mm

 

RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI RENG AB, Panjang 6 m
Tinggi 30 mm
Lebar Atas 25 mm
Lebar Sayap Kaki 12 mm
Tebal 0.55 mm
Tebal 0.45 mm

 

RANGKA ATAP BAJA RINGAN IGGI TRUSS 
IGGI RENG X, Panjang 6 m
Tinggi 30 mm
Lebar Atas 13 mm
Lebar Sayap Kaki 14 mm
Tebal 0.45 mm
PRODUK-IGGI-TRUSS

FLEXOVIT CUTTING & GRINDING DISC

DESCRIPTION :

Flexovit offers a complete collection of Coated Abrasives, Cutting and Grinding Wheels, Bonded Abrasives, Super Abrasives, Diamond Abrasives and Accessories to meet every requirement whether sanding, polishing, cutting, grinding or sharpening.

Throughout the world, Flexovit grinding and cutting-off wheels are extensively used across a range of industries including aerospace, automotive, foundries, fabrication, ship-building and construction. Flexovit’s wide range of products is characterized by a high price/performance ratio and long life time offering lower operational costs.
High performance Flexovit products are backed up by a team of experienced technicians providing the technical support that modern industrial companies demand. Flexovit’s stock delivery program ensures quick and reliable availability from stock. This is why Flexovit is the preferred brand for professional users of abrasive wheels.
With pride we present to you our state-of-the-art industrial range grinding and cutting-off wheels covering a wide diversity of applications.
 
The right disc for your application
Yours to choose from a wide product range.
Click below for more information on :

  • ISC-specifications
  • Boxlabels and shapes
  • Troubleshooting
  • Operating speeds
  • Safety
  • Applicationsvmatrix Cutting
  • Applicationsvmatrix Grinding
  • MSDS (example)

 
Grinding and Cutting-off Wheels are constantly reviewed and tested by our Centre of Excellence to keep living up to high expectations in our markets. New wheels (thin wheels, new applications etc.) are developped and extensively tested by a team of experts.
 

flexovitflexovit_banner_animation

 flexovit-featured

FLEXOVIT Cut Off Wheels

Cut off wheels and cut off discs  are reinforced for the cutting and grinding of metal.

FH thumbnail
Flexovit FH38 Flat Metal Cut-Off Wheel
General purpose flat metal cut-off wheel suitable for all ferrous metals
AT thumbnail
Flexovit A46T Ultra Thin Mega Inox Premium Cut-Off Wheel
Ultra thin, premium grade cut-off wheel for cutting stainless steel and hard ferrous metals.

 

asb thumbnail
Flexovit A36S Chop Saw Disc
Portable chop saw wheel for general purpose cutting of stainless steel and ferrous metals (bar, tubing, etc).

 

thumbnail
Flexovit 2UU670SS Demolition Saw Flat Metal Cut-Off Wheel
General purpose cutting disc for use on high speed stationary cut-off machines for cutting structural steels, bar stock etc.

 

depressed centre grinding wheel thumbnail
Flexovit A24/30T Metal Depressed Centre Cut-Off Wheel
General purpose cutting and rough grinding of ferrous metal welds and structural steels, available in a variety of sizes

 

depressed centre grinding wheel thumbnail
Flexovit A30S Depressed Centre Cut-Off Wheel
Depressed centre cut-off wheel for cutting ferrous metals including structural steel and sheet metals

 

thumbnail
Flexovit Mega Inox Premium Cut-Off Wheel
Inox cutting wheel to be used on stainless steel and very hard ferrous metal, available in a range of sizes

 

thumbnail
Flexovit A30S Iron Free Inox Standard Cut-Off Wheel
Stainless steel metal depressed centre cut off wheel, available in a range of sizes

 

thumbnail
Flexovit FH38 Aluminium Cut-Off Wheel
Flat metal aluminium cut-off wheel, available in a variety of sizes

 

thumbnail
Flexovit FH38 Iron Free Inox Standard Cut-Off Wheel
Flat metal iron free inox standard cut-off wheel, available in a range of sizes

 

thumbnail
Flexovit 2UU670SS High Speed Stationary Machine Cut-Off Wheel
Flat metal cut-off wheel for high speed stationary machine, available in a variety of sizes

 

thumbnail
Flexovit Demolition Saws Cut-Off Wheel
Flat metal cut-off wheel for high speed petrol saws / demolition saws, available in a range of sizes

 

thumbnail
Flexovit 1HU670QR High Speed Stationary Machine Cut-Off Wheel
Flat metal cut-off wheel suitable for high speed stationary machine, available in a variety of sizes

 

AT thumbnail
Flexovit A46T Ultra Thin Mega Inox Premium Cut-Off Wheel

25 Ultra thin, premium grade cut-off wheels for cutting stainless steel and hard ferrous metals.

thumbnail
Flexovit Multi Material Cut-Off Wheel

Suitable for a variety of materials including masonry, steel, stainless steel, aluminium, PVC & ceramics.

 flexovit-general-purpose flexovit-metal-cut-off flexovit-high-speed flexovit-flat-meta-cutting flexovit-metal-depressed flexovit-zirconia flexovit-metal-general-purpose flexovit-aluminium flexovit-iron-free-standard flexovit-iron-free-inox flexovit-mega-inox-ultra-thin flexovit-wa-flexible-disc flexovit-all-in-one-for-cutting-grinding flexovit-ac-flexible-disc

 

FLEXOVIT CUTTING & GRINDING DISC

DESCRIPTION :

Flexovit offers a complete collection of Coated Abrasives, Cutting and Grinding Wheels, Bonded Abrasives, Super Abrasives, Diamond Abrasives and Accessories to meet every requirement whether sanding, polishing, cutting, grinding or sharpening.

Throughout the world, Flexovit grinding and cutting-off wheels are extensively used across a range of industries including aerospace, automotive, foundries, fabrication, ship-building and construction. Flexovit’s wide range of products is characterized by a high price/performance ratio and long life time offering lower operational costs.

High performance Flexovit products are backed up by a team of experienced technicians providing the technical support that modern industrial companies demand. Flexovit’s stock delivery program ensures quick and reliable availability from stock. This is why Flexovit is the preferred brand for professional users of abrasive wheels.

With pride we present to you our state-of-the-art industrial range grinding and cutting-off wheels covering a wide diversity of applications.

 

The right disc for your application

Yours to choose from a wide product range.

Click below for more information on :

  • ISC-specifications
  • Boxlabels and shapes
  • Troubleshooting
  • Operating speeds
  • Safety
  • Applicationsvmatrix Cutting
  • Applicationsvmatrix Grinding
  • MSDS (example)

 

Grinding and Cutting-off Wheels are constantly reviewed and tested by our Centre of Excellence to keep living up to high expectations in our markets. New wheels (thin wheels, new applications etc.) are developped and extensively tested by a team of experts.

 

flexovitflexovit_banner_animation

 flexovit-featured

FLEXOVIT Cut Off Wheels

Cut off wheels and cut off discs  are reinforced for the cutting and grinding of metal.

Flexovit FH38 Flat Metal Cut-Off Wheel
Flexovit FH38 Flat Metal Cut-Off Wheel

General purpose flat metal cut-off wheel suitable for all ferrous metals

Flexovit A46T Ultra Thin Mega Inox Premium Cut-Off Wheel
Flexovit A46T Ultra Thin Mega Inox Premium Cut-Off Wheel

Ultra thin, premium grade cut-off wheel for cutting stainless steel and hard ferrous metals.

 

Flexovit A36S Chop Saw Disc
Flexovit A36S Chop Saw Disc

Portable chop saw wheel for general purpose cutting of stainless steel and ferrous metals (bar, tubing, etc).

 

Flexovit 2UU670SS Demolition Saw Flat Metal Cut-Off Wheel
Flexovit 2UU670SS Demolition Saw Flat Metal Cut-Off Wheel

General purpose cutting disc for use on high speed stationary cut-off machines for cutting structural steels, bar stock etc.

 

Flexovit A24/30T Metal Depressed Centre Cut-Off Wheel
Flexovit A24/30T Metal Depressed Centre Cut-Off Wheel

General purpose cutting and rough grinding of ferrous metal welds and structural steels, available in a variety of sizes

 

Flexovit A30S Depressed Centre Cut-Off Wheel
Flexovit A30S Depressed Centre Cut-Off Wheel

Depressed centre cut-off wheel for cutting ferrous metals including structural steel and sheet metals

 

Flexovit Mega Inox Premium Cut-Off Wheel
Flexovit Mega Inox Premium Cut-Off Wheel

Inox cutting wheel to be used on stainless steel and very hard ferrous metal, available in a range of sizes

 

Flexovit A30S Iron Free Inox Standard Cut-Off Wheel
Flexovit A30S Iron Free Inox Standard Cut-Off Wheel

Stainless steel metal depressed centre cut off wheel, available in a range of sizes

 

Flexovit FH38 Aluminium Cut-Off Wheel
Flexovit FH38 Aluminium Cut-Off Wheel

Flat metal aluminium cut-off wheel, available in a variety of sizes

 

Flexovit FH38 Iron Free Inox Standard Cut-Off Wheel
Flexovit FH38 Iron Free Inox Standard Cut-Off Wheel

Flat metal iron free inox standard cut-off wheel, available in a range of sizes

 

Flexovit 2UU670SS High Speed Stationary Machine Cut-Off Wheel
Flexovit 2UU670SS High Speed Stationary Machine Cut-Off Wheel

Flat metal cut-off wheel for high speed stationary machine, available in a variety of sizes

 

Flexovit Demolition Saws Cut-Off Wheel
Flexovit Demolition Saws Cut-Off Wheel

Flat metal cut-off wheel for high speed petrol saws / demolition saws, available in a range of sizes

 

Flexovit 1HU670QR High Speed Stationary Machine Cut-Off Wheel
Flexovit 1HU670QR High Speed Stationary Machine Cut-Off Wheel

Flat metal cut-off wheel suitable for high speed stationary machine, available in a variety of sizes

 

Flexovit A46T Ultra Thin Mega Inox Premium Cut-Off Wheel
Flexovit A46T Ultra Thin Mega Inox Premium Cut-Off Wheel

25 Ultra thin, premium grade cut-off wheels for cutting stainless steel and hard ferrous metals.

Flexovit Multi Material Cut-Off Wheel
Flexovit Multi Material Cut-Off Wheel

Suitable for a variety of materials including masonry, steel, stainless steel, aluminium, PVC & ceramics.

 flexovit-general-purpose flexovit-metal-cut-off flexovit-high-speed flexovit-flat-meta-cutting flexovit-metal-depressed flexovit-zirconia flexovit-metal-general-purpose flexovit-aluminium flexovit-iron-free-standard flexovit-iron-free-inox flexovit-mega-inox-ultra-thin flexovit-wa-flexible-disc flexovit-all-in-one-for-cutting-grinding flexovit-ac-flexible-disc

 

FLEXOVIT CUT & GRINDING DISC

grinderwheels-flexovit_masonry flexovit_banner_animation

FLEXOVIT Cut Off Wheels

Cut off wheels and cut off discs  are reinforced for the cutting and grinding of metal.

Flexovit FH38 Flat Metal Cut-Off Wheel
Flexovit FH38 Flat Metal Cut-Off Wheel

General purpose flat metal cut-off wheel suitable for all ferrous metals

Flexovit A46T Ultra Thin Mega Inox Premium Cut-Off Wheel
Flexovit A46T Ultra Thin Mega Inox Premium Cut-Off Wheel

Ultra thin, premium grade cut-off wheel for cutting stainless steel and hard ferrous metals.

 

Flexovit A36S Chop Saw Disc
Flexovit A36S Chop Saw Disc

Portable chop saw wheel for general purpose cutting of stainless steel and ferrous metals (bar, tubing, etc).

 

Flexovit 2UU670SS Demolition Saw Flat Metal Cut-Off Wheel
Flexovit 2UU670SS Demolition Saw Flat Metal Cut-Off Wheel

General purpose cutting disc for use on high speed stationary cut-off machines for cutting structural steels, bar stock etc.

 

Flexovit A24/30T Metal Depressed Centre Cut-Off Wheel
Flexovit A24/30T Metal Depressed Centre Cut-Off Wheel

General purpose cutting and rough grinding of ferrous metal welds and structural steels, available in a variety of sizes

 

Flexovit A30S Depressed Centre Cut-Off Wheel
Flexovit A30S Depressed Centre Cut-Off Wheel

Depressed centre cut-off wheel for cutting ferrous metals including structural steel and sheet metals

 

Flexovit Mega Inox Premium Cut-Off Wheel
Flexovit Mega Inox Premium Cut-Off Wheel

Inox cutting wheel to be used on stainless steel and very hard ferrous metal, available in a range of sizes

 

Flexovit A30S Iron Free Inox Standard Cut-Off Wheel
Flexovit A30S Iron Free Inox Standard Cut-Off Wheel

Stainless steel metal depressed centre cut off wheel, available in a range of sizes

 

Flexovit FH38 Aluminium Cut-Off Wheel
Flexovit FH38 Aluminium Cut-Off Wheel

Flat metal aluminium cut-off wheel, available in a variety of sizes

 

Flexovit FH38 Iron Free Inox Standard Cut-Off Wheel
Flexovit FH38 Iron Free Inox Standard Cut-Off Wheel

Flat metal iron free inox standard cut-off wheel, available in a range of sizes

 

Flexovit 2UU670SS High Speed Stationary Machine Cut-Off Wheel
Flexovit 2UU670SS High Speed Stationary Machine Cut-Off Wheel

Flat metal cut-off wheel for high speed stationary machine, available in a variety of sizes

 

Flexovit Demolition Saws Cut-Off Wheel
Flexovit Demolition Saws Cut-Off Wheel

Flat metal cut-off wheel for high speed petrol saws / demolition saws, available in a range of sizes

 

Flexovit 1HU670QR High Speed Stationary Machine Cut-Off Wheel
Flexovit 1HU670QR High Speed Stationary Machine Cut-Off Wheel

Flat metal cut-off wheel suitable for high speed stationary machine, available in a variety of sizes

 

Flexovit A46T Ultra Thin Mega Inox Premium Cut-Off Wheel
Flexovit A46T Ultra Thin Mega Inox Premium Cut-Off Wheel

25 Ultra thin, premium grade cut-off wheels for cutting stainless steel and hard ferrous metals.

Flexovit Multi Material Cut-Off Wheel
Flexovit Multi Material Cut-Off Wheel

Suitable for a variety of materials including masonry, steel, stainless steel, aluminium, PVC & ceramics.

 

MAKITA DC18RC – 18V LI-ION / NI-MH CHARGER

MAKITA DC18RC – 18V LITHIUM-ION & NICAD-MH CHARGER

Makita DC18RC 18v Li-Ion Fast Charger Li-ion / Ni-Mh 7.2-18v

DC18RC

Details

Makita DC18RC LXT Lithium Ion 18V Fast Battery Charger charges Makita batteries from 7.2V to 18V

The Makita DC18RC LXT Lithium-Ion Optimum Charger is the most advanced and feature rich charger that offers quick charging and longer battery life. This highly efficient charger takes 15 minutes for charging small batteries and 30 minutes for charging LXT batteries. It has an integrated cooling fan that cools the battery during charging to avoid over heating which results in speedy charging. To enhance battery life, this rapid optimum charger manages the battery’s current, voltage and temperature throughout the charging process. Its compact and light weight design makes it perfect for transportation and storage. All the above mentioned features make this Lithium-Ion Optimum Charger superior in its range.

DR 18 RC CHARGER MAKITAFEATURES

  • The DC18RC has a cooling fan and Active 3 Controls
    • Fast charging – charges Li-Ion 3.0Ah battery in only 22 minutes
    • Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
    • Forced air cooling fan – cools the battery to minimise charging time
    • Digital power display identifies the condition of the battery and charging condition
  • This means that during the loading of the charging voltage, charging current, and temperature is held in the holes
  • The cooling system blows cool air into the battery
  • As a result, high temperatures occur in the battery, so that the battery life is extended, and the charging process is accelerated
  • When used in conjunction with charging adapter ADP03 this charger offers also the possibility of charging Ni-MH slide on batteries of 9.6V to 24V batteries or when used with charging adapter ADP04 this charger offers the possibility to charge Ni-Cd and Ni-MH rod and block batteries of 7.2V to 18V batteries

SPECIFICATION :

Cell Capacity 1.5-5.0Ah
Charge Time 15mins(1.5Ah) 22mins(3.0Ah) 36mins(4.0Ah) 45mins(5.0Ah)
Net Weight 820g
Overall Length 185mm
Voltage 18V

DC18RC WITH BATTERAY BL1840

Compatible with the following battery models:

  • BL1840 (196399-0) 4Ah – 36 Minutes
  • BL1830 (194204-5) 3Ah – 22 Minutes
  • BL1430 (194065-3) 3Ah – 22 Minutes
  • BL1415 (194558-0) 1.3Ah – 15 Minutes
  • Total Shipping Weight: 1kg

CHARGER MAKITA DC18RC 18v Li-Ion Fast Charge

MAKITA DC18RC – 18V LITHIUM-ION & NICAD-MH CHARGER

Makita DC18RC 18v Li-Ion Fast Charger Li-ion / Ni-Mh 7.2-18v

DC18RC

Details

Makita DC18RC LXT Lithium Ion 18V Fast Battery Charger charges Makita batteries from 7.2V to 18V

The Makita DC18RC LXT Lithium-Ion Optimum Charger is the most advanced and feature rich charger that offers quick charging and longer battery life. This highly efficient charger takes 15 minutes for charging small batteries and 30 minutes for charging LXT batteries. It has an integrated cooling fan that cools the battery during charging to avoid over heating which results in speedy charging. To enhance battery life, this rapid optimum charger manages the battery’s current, voltage and temperature throughout the charging process. Its compact and light weight design makes it perfect for transportation and storage. All the above mentioned features make this Lithium-Ion Optimum Charger superior in its range.

 

DR 18 RC CHARGER MAKITAFEATURES

  • The DC18RC has a cooling fan and Active 3 Controls
    • Fast charging – charges Li-Ion 3.0Ah battery in only 22 minutes
    • Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
    • Forced air cooling fan – cools the battery to minimise charging time
    • Digital power display identifies the condition of the battery and charging condition
  • This means that during the loading of the charging voltage, charging current, and temperature is held in the holes
  • The cooling system blows cool air into the battery
  • As a result, high temperatures occur in the battery, so that the battery life is extended, and the charging process is accelerated
  • When used in conjunction with charging adapter ADP03 this charger offers also the possibility of charging Ni-MH slide on batteries of 9.6V to 24V batteries or when used with charging adapter ADP04 this charger offers the possibility to charge Ni-Cd and Ni-MH rod and block batteries of 7.2V to 18V batteries

 

 

DC18RC WITH BATTERAY BL1840

SPECIFICATION :

Cell Capacity 1.5-5.0Ah
Charge Time 15mins(1.5Ah) 22mins(3.0Ah) 36mins(4.0Ah) 45mins(5.0Ah)
Net Weight 820g
Overall Length 185mm
Voltage 18V

 

 

 

 

Compatible with the following battery models:

  • BL1840 (196399-0) 4Ah – 36 Minutes
  • BL1830 (194204-5) 3Ah – 22 Minutes
  • BL1430 (194065-3) 3Ah – 22 Minutes
  • BL1415 (194558-0) 1.3Ah – 15 Minutes
  • Total Shipping Weight: 1kg