Archives January 2019

CABLE GLAND BODY CMP TE1FU M20s

CABLE GLAND BODY CMP TE1FU M20s Material: 316L Stainless Steel Part BODY for Cable Gland CMP m20s

Key Features of CMP Cable Glands

Above is a typical CMP double seal Cable Gland showing the parts in an exploded view (1) Unique Independent Inner Sealing The CMP inner sealing principal is quite different from other cable gland types and because the activation of the inner sealing ring is separated from the armour clamping components this means that the possibility of inadvertent over-tightening is eliminated. Unlike traditional compression seals that have no means of direct control on their application, the CMP inner sealing technique is achieved using a displacement seal that is independently controlled by the user during installation. The Compensating Displacement Seal System (1) has helped CMP to take its original displacement sealing ring concept to another level. The unique Compensator has allowed the cable gland components to be fully tightened metal-to-metal and relieve the potential excess forces that could be transferred to the cable bedding, eliminating potential cable damage and coldflow. (2) (3) Secure Armour Termination CMP Products’ armour clamping method involves a unique termination solution that ensures a permanent crimping of the cable armour, creating a low impedance connection that does not suffer from self-loosening. The patented AnyWayTM clamping ring aids an easy ‘Right First Time’ installation. Secure armour clamping like this also contributes to enhanced levels of EMC performance as well as reliable earth continuity. (4) Outer Seal The unique CMP Products Outer Seal Tightening Guide (OSTG) and Load Retention Sealing Ring (LRS) ensure an IP/NEMA rated seal is formed around the cable to the correct degree. As similar solution is also provided for the sealing rings in our Cable Glands for unarmoured cables. (5) Proven Internally Enclosed Deluge Seal CMP Products integrated ‘O’ ring deluge seal (tested to DTS 01:91) prevents corrosion of the cable armour by ensuring that moisture cannot track around the Cable Gland threads and into the armour termination body. As an internally enclosed deluge seal the ‘O’ ring is protected from mechanical damage and harmful UV rays.
   

TE1FU | Ex e, Ex d, Ex nR, Ex ta | Explosive Atmosphere Cable Gland For all types of Armoured Cables

Globally Approved, Explosive Atmosphere Cable Gland • Stainless steel compact design • Fully sequential, three step installation procedure • Reduces installation times, cost & risk • Direct & remote installation • Unique compensating displacement seal system(CDS) • Metal-to-metal installation regardless of cable bedding diameter • Designed to prevent Coldflow, see CMP Technical Document TS002 (available upon request) • Integral protected deluge seal • Controlled outer ‘load retention’ seal • Unique OSTG prevents overtightening • -60°C to +130°C • Globally marked, IECEx, ATEX & cCSAus • EMC tested
  TECHNICAL:
Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications* Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications* Category B (Category A when used with braid, tape or pliable wire armour cables)
ATEX Certificate SIRA13ATEX1073X SIRA13ATEX4079X
Code of Protection II 2G, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da, II 3G Ex nR IIC Gc, I M2, Ex d I Mb, Ex e I Mb
Compliance Standards EN60079-0,1,7,15,31
IECEx Certificate IECEx SIR 13.0028X IECEx SIM 14.0007X
Code of Protection Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
Compliance Standards IEC 60079-0,1,7,15,31
cCSAus Certificate (20s16 – 90) 1310517
CSAus Code of Protection Class II, Div 2, Groups E,F and G, Class III, Enclosure Type 4X, Oil Res II Class I, Zone 1, AEx e II, AEx nR II
cCSA Code of Protection Class I, Div 2, Groups A,B,C and D, Class II, Div 2, Groups E,F and G, Class III, Enclosure Type 3, 4 and 4X, Ex d IIC, Ex e IIC, Ex nR II
Compliance Standards CAN/CSA-C22.2 No 0, 18, 25, 30, 94, 174, CAN/CSA-E60079-0, 1, 7, ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079-0, 1, 7
EAC Certificate C-GB.AA87.B.00487
NEPSI Certificate GYJ18.1253X
CCOE / PESO (India) Certificate P333688
INMETRO Approval TÜV 11.0374X
Marine Approvals LRS: 01/00172, DNV: TAE00000Y, ABS: 14-LD234401A-4-PDA, BV: 43180/A1BV
Ingress Protection Rating ** IP66, IP67 & IP68
Deluge Protection Compliance DTS01 : 91
Cable Gland Material Stainless Steel
Seal Material CMP SOLO LSF Halogen Free Thermoset Elastomer
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Aluminium Strip Armour (ASA), Screened Flexible (EMC) Wire Braid (e.g. CY/SY), Wire Braid Armour (e.g SWB)
Armour Clamping Reversible Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique Inner Bedding Sealing Ring: Compensating Displacement Seal (CDS), Outer Sheath Sealing Ring : Load Retention Seal (LRS)
Sealing Area(s) Cable Inner Bedding & Outer Cable Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners, Armour Former Tool
Note : *Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444 ** When CMP installation accessories are used. Refer to Maintaining a Seal for further information. *** IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request [embeddoc url=”https://store.surabayateknik.com/wp-content/uploads/2019/01/TE1FU-METRIC.pdf” download=”all” viewer=”google”] [embeddoc url=”https://store.surabayateknik.com/wp-content/uploads/2019/01/CMP-TE1FU.pdf” download=”all” viewer=”google”]    ]]>

CABLE GLAND M32 SS NEWCAP No. 8

NEWCAP CT-e Series Non-armoured Gland

M32 No.8

Material: Stainless Steel

PRODUCT DETAIL:
Protection Type Increased Safety
Gland Type Non-armoured
Cable Type Non-armoured cable, tray cable and braided cable for EMC specific cable and applications
Sizes M12 to M63 (Metric)
Environmental Rating IP66; IP68
Standard Material Nickel-plated brass
Optional Material 316L stainless steel

FEATURES:

  • Standard material is nickel-plated brass for superior corrosion resistance
  • Provides a weatherproof seal on the outer sheath of the cable
  • Standard neoprene seal suitable for use in operating temperatures -20°C to +80°C
  • Available in stainless steel long fixing thread option
  • Available with metric threads
Cable types: • Non-armored cable • Shielded cable for EMC specific cable and applications Standard materials: • Nickel-plated brass for superior corrosion resistance • 316L stainless steel long fixing thread (optional); it is recommended that a suitable lubricant be used on all threads of stainless steel and aluminum versions Ingress protection (IP): • IP66/IP68 tested 30m/7days on surface Ra 1.6m maximum Operating temperature: • Neoprene seal: -20°C to +80°C Certifications and compliances: • Zones 1 & 2, Group IIC • Zones 21 & 22, Group IIIC ATEX Certificate No.: INERIS 13ATEX0008X • Ex eb IIC, Ex nRc IIC, Ex tb IIIC IECEx Certificate No.: IECEx INE 13.0003X Marine Certificate No.: BV 40909_A0 (shipping application) For use with non-armoured cable and shielded cable for EMC-specific cable and applications, NEWCAP CT-e Non-armoured Glands are installed:
  • To provide a flameproof and weatherproof seal on the outer sheath of the cable
Please note this product has been revised to comply with IEC 60079-0: 2011 Ed.6.   [embeddoc url=”https://store.surabayateknik.com/wp-content/uploads/2019/01/SURABAYA-TEKNIK___NEWCAP_.pdf” download=”all” viewer=”google”] [embeddoc url=”https://store.surabayateknik.com/wp-content/uploads/2019/01/newcap-ct-e-datasheet-1.pdf” download=”all” viewer=”google”] [embeddoc url=”https://store.surabayateknik.com/wp-content/uploads/2019/01/newcap-ms-e-datasheet-1.pdf” download=”all” viewer=”google”]  ]]>

STARRETT PT22428 SWIVEL POST SNUG WITH CLAMP

Starrett PT22428 Swivel Post Snug with Dovetail Indicator Clamp for Test Indicators    

Product Features

  • Swivel post snug with dovetail clamp for use with Starrett 708, 709, and 811 series dovetail mount dial test indicators (not included)
  • Fits 3/32 to 1/4″ diameter spindles and posts
  • Knurled thumb screw provides secure grip when making adjustments
  • Also compatible with Starrett 252 series height transfer gauge, 657 series magnetic base holders, and the 1/4″ rod of the PT22430 snug and rod unit (not included)

Product Description

The Starrett PT22428 swivel post snug with dovetail clamp Is designed for use with Starrett 708, 709, and 811 series dovetail mount dial test indicators (not included). The snug fits 3/32 to 1/4″ diameter spindles and posts. The knurled thumb screw provides a secure grip when making adjustments. The snug is also compatible with Starrett 252 series height transfer gauge, 657 series magnetic base holders, and the 1/4″ rod of the PT22430 snug and rod unit (not included). Test indicator gauges, also called gages, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as small variations in flatness or height of an inspected workpiece, and permit measurement in narrow grooves or small bores. A test indicator gauge consists of a ball-tipped contact point on a levered arm, also called a measuring insert, which pivots from a hinge point. The reading indicates the degree of angular displacement of the arm. Test indicator gauges are commonly used in manufacturing, machining, and mechanical engineering. Standard test indicators measure the displacement of the arm perpendicular to the axis of the indicator. Dial and electronic indicators are very similar to test indicators, except that the axis of measurement is parallel to the axis of the indicator. Test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.
]]>

UNION ELBOW PUSH IN 6mm OD SS

PNEUMATIC PUSH IN UNION ELBOW 6mm OD, STAINLESS STEEL  

Technical Attributes
Brand
Item Pneumatic Push-to-connect Fitting
Fitting Type Union elbow
Body Material Stainless steel
Thread Sealant No
Port Connection Info (2) 6mm tube
Operating Pressure -29.5in Hg to 290 psi
Operating Temperature 32 to 390 deg F
For Use With Flexible pneumatic tubing
 
Common Precautions for Tubing and Fitting Products Warnings:
• Do not use fittings with media other than air.
• Avoid installing with tubing under tension or with excessive bends.
• Do not use the product where weld spatters occur as fire may occur.
• Product damage or air leakage may occur at places where there is excessive rotation or vibration of the fittings.
• Use caution in water as the product may be damaged by surge pressure.
• Do not use the product where it is directly exposed to fluids such as cutting oil, lubricating oil, and coolant oil.
Cautions:
• Assemble the tubing only after cleaning away impurities such as dust and excess debris.
• Fitting products are recommended for air systems only. Avoid using for other purposes.
]]>

UNION ELBOW PUSH IN 8mm SS

PNEUMATIC PUSH IN UNION ELBOW 8mm OD, STAINLESS STEEL  

Technical Attributes
Brand
Item Pneumatic Push-to-connect Fitting
Fitting Type Union elbow
Body Material Stainless steel
Thread Sealant No
Port Connection Info (2) 8mm tube
Operating Pressure -29.5in Hg to 290 psi
Operating Temperature 32 to 390 deg F
For Use With Flexible pneumatic tubing
 
Common Precautions for Tubing and Fitting Products Warnings:
• Do not use fittings with media other than air.
• Avoid installing with tubing under tension or with excessive bends.
• Do not use the product where weld spatters occur as fire may occur.
• Product damage or air leakage may occur at places where there is excessive rotation or vibration of the fittings.
• Use caution in water as the product may be damaged by surge pressure.
• Do not use the product where it is directly exposed to fluids such as cutting oil, lubricating oil, and coolant oil.
Cautions:
• Assemble the tubing only after cleaning away impurities such as dust and excess debris.
• Fitting products are recommended for air systems only. Avoid using for other purposes.
]]>

UNION ELBOW SS 10mm PUSH IN FITTING

PNEUMATIC PUSH IN UNION ELBOW 10mm OD, STAINLESS STEEL  

Technical Attributes
Brand
Item Pneumatic Push-to-connect Fitting
Fitting Type Union elbow
Body Material Stainless steel
Thread Sealant No
Port Connection Info (2) 10mm tube
Operating Pressure -29.5in Hg to 290 psi
Operating Temperature 32 to 390 deg F
For Use With Flexible pneumatic tubing
 
Common Precautions for Tubing and Fitting Products Warnings:
• Do not use fittings with media other than air.
• Avoid installing with tubing under tension or with excessive bends.
• Do not use the product where weld spatters occur as fire may occur.
• Product damage or air leakage may occur at places where there is excessive rotation or vibration of the fittings.
• Use caution in water as the product may be damaged by surge pressure.
• Do not use the product where it is directly exposed to fluids such as cutting oil, lubricating oil, and coolant oil.
Cautions:
• Assemble the tubing only after cleaning away impurities such as dust and excess debris.
• Fitting products are recommended for air systems only. Avoid using for other purposes.
]]>

FESTO CQRS 1/4-8 PUSH IN FITTING

Festo Push-in fitting CRQS-1/4-8

Item #:CRQS-1/4-8
Manufacturer: Festo
Supplier Part #: 162864
Push-in fitting CRQS-1/4-8 male thread with external hexagon. Size=Standard, Nominal size=5,8 mm, Type of seal on screw-in stud=coating, Assembly position=Any, Container size=1 SPESIFICATION:
Product Category : Pneumatic Fittings
Fitting Type : Tube Fitting
Connection Type : Push-to-Connect
English Size : 0.250 inch (6.35 mm)
Metric Size : 5.80 mm (0.2283 inch)
Temperature : 5 to 248 F (-15 to 120 C)
Festo Straight – Male, Port 1: 1/4In BSPT (R) Male, Port 2: 8mm PTC Metric, For OpereatIng Specs see More Details.

Item Specifications

  • Straight – Male
  • 1/4 in
  • BSPT (R) Male
  • Push-to-Connect Metric
  • 8 mm
  • 1
  • No
  • Stainless Steel
  • Stainless Steel
  • Stainless Steel
  • -0.95 – 10 bar
  • -13.78 – 145.04 psi
  • -15 to 120° C
  • 5 to 248° F
  • Standard
[embeddoc url=”https://store.surabayateknik.com/wp-content/uploads/2019/01/CRQS-1_4-8_Specifications.pdf” download=”all” viewer=”google”]]]>

FESTO CQRSL 1/4-8 PUSH IN L FITTING STAINLESS

Push-in L-fitting CRQSL-1/4-8 rotatable by 360°, male thread with external hexagon. Size=Standard, Nominal size=5,1 mm, Type of seal on screw-in stud=coating, Assembly position=Any, Container size=1
SPESIFICATION:
Product Category : Pneumatic Fittings
Fitting Type : Tube Fitting; Elbow Fitting
Connection Type : Push-to-Connect
Material : Stainless Steel
CRQSL-1/4-8 162874,Festo,CRQSL-1/4-8 CRQSL-1%2F4-8%20162874 Item #: CRQSL-1/4-8 162874 Product Info Manufacturer: Festo Supplier Part #: 162874  
Technical data
size Standard
Nominal width [mm] 5,1
installation position arbitrary
Packing size 1
Construction set up Push-pull principle
Operating pressure complete temperature range [bar] -0.95 to 10
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water according to manufacturer declaration at www.festo.com
Information about operating and control medium Oiled operation possible
Corrosion resistant class KBK 4 – particularly severe corrosion stress
Food compatibility See expanded material information
ambient temperature [°C] -15 to 120
Maritime Klassifizierung siehe Zertifikat
Product weight [g] 30,0
Usable pipelines PFAN
Pneumatic connection 1 Male thread R1/4
Pneumatic connection 2 For hose exterior diameter 8 mm
Material information RoHs compliant
Housing material High-alloyed stainless steels
Werkstoff Lösering High-alloyed stainless steels
Werkstoff Schlauchdichtung FPM
Werkstoff Schlauchklemmsegment High-alloyed stainless steels
]]>

SICK Cylindrical photoelectric sensors GR18S

SICK GRTB18S-P2417 Cylindrical photoelectric sensors GR18S Part Number: 1076101

  • Features
    Sensor/ detection principle Photoelectric proximity sensor, Background suppression
    Housing design (light emission) Cylindrical
    Thread diameter (housing) M18 x 1
    Optical axis Axial
    Sensing range max. 3 mm … 300 mm 1)
    Sensing range 20 mm … 150 mm 1)
    Type of light Visible red light
    Light source PinPoint LED 2)
    Light spot size (distance) Ø 7 mm (100 mm)
    Wave length 650 nm
    Adjustment Potentiometer, 270°
    • 1) Object with 90 % reflectance (referred to standard white, DIN 5033).
    • 2) Average service life: 100,000 h at TU = +25 °C.
 
  • Mechanics/electronics
    Supply voltage 10 V DC … 30 V DC 1)
    Ripple ± 5 Vpp 2)
    Power consumption 30 mA
    Switching output PNP
    Output function Complementary
    Switching mode Light/dark switching
    Signal voltage PNP HIGH/LOW VS – (≤ 3 V) / approx. 0 V
    Output current Imax. 100 mA 3)
    Response time < 500 µs 4)
    Switching frequency 1,000 Hz 5)
    Connection type Male connector M12, 4-pin
    Circuit protection A 6) B 7) D 8)
    Protection class III
    Housing material Plastic, ABS
    Optics material Plastic, PMMA
    Enclosure rating IP67
    Items supplied Fastening nuts (2 x)
    EMC EN 60947-5-2
    Ambient operating temperature –25 °C … +55 °C 9)
    Ambient storage temperature –40 °C … +70 °C
    UL File No. NRKH.E348498 & NRKH7.E348498
    • 1) Limit values when operated in short-circuit protected network: max. 8 A.
    • 2) May not exceed or fall below Uv tolerances.
    • 3) At Uv > 24 V or ambient temperature > 49 °C, IA max. = 50 mA.
    • 4) Signal transit time with resistive load.
    • 5) With light/dark ratio 1:1.
    • 6) A = VS connections reverse-polarity protected.
    • 7) B = inputs and output reverse-polarity protected.
    • 8) D = outputs overcurrent and short-circuit protected.
    • 9) At Uv <=24V and IA<50mA.
 
Classifications
ECl@ss 5.0 27270904
ECl@ss 5.1.4 27270904
ECl@ss 6.0 27270904
ECl@ss 6.2 27270904
ECl@ss 7.0 27270904
ECl@ss 8.0 27270904
ECl@ss 8.1 27270904
ECl@ss 9.0 27270904
ETIM 5.0 EC002719
ETIM 6.0 EC002719
UNSPSC 16.0901 39121528
 

Technical drawings

GRTB18S-P2417
Adjustments possible GRTB18(S), GRTE18(S), Sensing range setting: Potentiometer, 270°
GRTB18S-P2417
Connection diagram
GRTB18S-P2417
Characteristic curve
GRTB18S-P2417
Sensing range diagram
GRTB18S-P2417
Dimensional drawing GRTB18S, plastic, connector, straight, adjustable
]]>