Magnaflux Magnavis 7HF Black

magnavis 7hf

Magnavis® 7HF Black Visible Magnetic Particle Wet Method Prepared Bath

Magnavis® 7HF Black Visible Magnetic Particle Wet Method Prepared Bath is designed for spot inspections of parts that, because of their size or location, must be inspected in the field.

Magnavis® 7HF is composed of 7C Black Magnaflux magnetic powder suspended in a low volatility mineral oil. It offers significant advantages in situations where bulk processing is found to be impractical and is often used in combination with WCP-2 White Contrast Paint.

Specifications Compliance:

ASME B & PV Code, Sec. V, ASTM E 709, ASTM E 1444, AMS 3041, AMS 3043, Boeing PS-21201, MIL-STD-2132

Part Number and Container Size:

  • 01-1580-79: 16 oz. Aerosol (9)  – Sold in USA Only.
  • 01-1580-78: 16 oz. Aerosol (12)

Applications: Magnavis® 7HF is ideal for remote inspection of tubes, piping, and other large structures.

 

View & Download :

MSDS Magnavis 7HF Black

Product Data Sheet Magnavis 7HF Black

 

Magnaflux Spotcheck SKL-WP2

Magnaflux-SKL-WP2-imageGeneral Description:
Spotcheck SKL-WP2 is a red visible dye, low odor, water washable penetrant. SKL-WP2 exhibits outstanding penetrating characteristics, which provide for increased reliability of discontinuity identification. SKL-WP2’s water wash removability eliminates the need for solvent removers or emulsifiers to remove excess surface penetrant. WARNING: Penetrants attack and even dissolve many kinds of plastic pipe.  Polyvinyl chloride (PVC) pipe is especially vulnerable, and can crumble after only a few days of exposure.  Even diluted penetrant rinsings attack it rapidly.  ABS plastic pipe is nearly as sensitive. When installing plumbing to handle penetrant rinsings, use metal pipe.

Composition:
SKL-WP2 consists of non-volatile penetrating oils, surface active agents (emulsifiers) and dye.

Method of Application: 
Immersion, flooding, brushing, conventional spray, aerosol spray

Penetration/Dwell Time: 
The generally accepted minimum penetration time is 10 minutes. Some specifications may require longer dwell times. SKL-WP2 is generally removed by water spray.

 

Property                         SKL-WP
Colour                             Dark Red
Odour                              Bland
Flash point                      > 93°C
Density                           0.92 g/ml
Viscosity @ 38°C             9.0 cS
Corrosion                         Meets AMS 2644
Sulfur Content                 < 300 ppm
Chloride Content             < 300 ppm
Fluoride Content             < 50 ppm
AMS 2644 Class             Type 2 Method A
AMS 2644 Sensitivity       N/A
EN ISO 3452-2 Designation Type II Ad-2

 

skl-wp2_lrg

 

 

Spotcheck® SKL-WP2 Water Washable Penetrant 400ml

Spotcheck® SKL-WP2 water washable penetrant eliminates the need for solvent removers or emulsifiers in the removal of excess surface penetrant.

Spotcheck® SKL-WP2 is a red visible dye, low odor, water washable penetrant that exhibits outstanding penetrating characteristics and discontinuity identification. Water wash removable, SKL-WP2 eliminates the need for solvent removers or emulsifiers in the elimination of excess surface penetrant.

Specifications Compliance:

AMS 2644, Boeing PS 21202, MIL-STD-271, ASME B&PV Code, Section V, MIL-STD- 2132, NAVSEA 250-1500-1, AECL, ASTM E 165, ASTM E 1417, General Electric P50YP107, ISO 3452-2 (Sensitivity Level 2)

Part Number and Container Size:

  • 01-5190-35: 1 Gallon (Case of 4)
  • 01-5190-40: 5 Gallon Pail
  • 01-5190-45: 55 Gallon Drum
  • 01-5190-78: 16 fl. oz. aerosols (case of 12) >>> 400ml AVAILABLE

Applications: Weld Inspection, Castings, Forgings, Pressure Vessels, General Metal Work.

Magnaflux Spotcheck SKD-S2 Developer

skd-s2

Spotcheck® SKD-S2 Non-Halogenated Solvent Developer

Spotcheck® SKD-S2 is a non-halogenated solvent developer that meets major requirements for special alloy and nuclear applications.

Spotcheck® is a ready to use suspension of white developing particles in a fast drying solvent. It produces an opaque white coating, which provides an excellent contrasting background for penetrant indications.

Specifications Compliance:

AMS 2644, MIL-STD-271, MIL-STD-2132, AECL, ASME B & PV Code, Section V, Boeing PS-21202, AMS 2647, ASTM E1417, ASTM E165, NAVSEA 250-1500-1, Boeing BAC 5423, PSD 6-46 or 8-4, GE P50YP107, ISO 3452

Part Number and Container Size:

  • 01-5352-35:  1 gallon (case of 4)
  • 01-5352-40:  5 gallon pail
  • 01-5352-45:  55 gallon drum

Also available in 16 oz. aerosol cans

Applications: Developer for Liquid Penetrant Inspection process.

Classification: Form d Non-aqueous Type 1 Fluorescent (solvent based). Form e Non-aqueous Type 2 Visible Dye (solvent based).

View & Download – MSDS Spotcheck SKD-S2

Magnaflux Spotcheck SKC-S Cleaner

skc-s_lrg

Spotcheck® SKC-S

Spotcheck® SKC-S is a non-halogenated material used in the penetrant inspection process.

Spotcheck® SKC-S is a non-halogenated material used in the liquid penetrant inspection process. SKC-S is used on a moist cloth to remove surface penetrant from the inspection area prior to applying developer.

Specifications Compliance:

AMS-2644; MIL-STD-271; MIL-STD-2132; AECL; ASTM E 165; ASTM E 1417; ASME B&PV Code, Section V; NAVSEA 250-1500-1; Boeing BAC 5423 PSD 6-46 or 8-4; General Electric P50YP107; Boeing PS-21202, ISO 3452

Part Number and Container Size:

  • 01-5750-35: 1 gallon (case of 4)
  • 01-5750-40: 5 gallon pail
  • 01-5750-45: 55 gallon drum

Available in 16 oz. aerosol cans

Applications: SKC-S is used to remove excess surface penetrant from the inspection area prior to applying developer.

Classification: Class 2

Temperature: 40°F to 125°F
View & Download – MSDS Spotcheck SKC-S

Magnaflux Spotcheck SKL-SP2 Penetrant

magnaflux__medium

Spotcheck® SKL-SP2 is a solvent removable penetrant offering maximum reliability in the detection of surface-open flaws and discontinuities.

Spotcheck® SKL-SP2 is a solvent removable (or post emulsifiable) red color contrast penetrant with outstanding penetrating characteristics. It offers maximum reliability in locating surface-open flaws and discontinuities and has been successfully used on non-porous ceramics and other similar materials.

Specifications Compliance:

AMS-2644, AECL, ASME B & PV Code Sec V, ASTM E1417, MIL-STD 2132, ASTM E165, MIL-STD-271, ISO 3452

Part Number and Container Size:

  • 01-5155-35:  1 gallon (case of 4)
  • 01-5155-40:  5 gallon pail
  • 01-5155-45:  55 gallon drum

Available in 16 oz. aerosol cans

Applications:  Welds, Forgings, Pressure Vessels, Castings, General Metal Work, Leak Testing, Power Plant, Construction.

Classification: Type 2, Method B, C or D

Temperature: SKL-SP2 should be used at temperatures between 40° F to 125° F.

PNEUMATIC DEBURRING TOOL BC-005

NITTO KOHKI PNEUMATIC DEBURRING TOOL – BURR CUTTER

MODEL: BC-005

BC-005_im1-2

For deburring machined holes

  • While gripping the lever, push the countersink into the machined holes to remove burrs.
  • Optimum speed can be obtained by the adjust valve, resulting in clean deburred surfaces.
  • Deburring work can be made wherever air source is available. No need to carry workpieces to a drill press.

Specifications

Air Pressure: 0.6 MPa
Air Consumption (No load): 0.22 m³/min
Motor Free Speed (rpm): 420 min-1
Deburring hole diameter: 3 to 34 mm
Countersink shank size: 6, 8, 10 mm
Mass (Weight): 0.75 kg
Standard Accessories:
  • Chuck 6 mm
  • Chuck 8 mm
  • Chuck 10 mm (on the body)
  • Suspension Bail
  • Hex. Socket screw Key 2.5 mm
  • Bushing R 1/8 × NPT 1/4

BURR CUTTER 1BURR CUTTER 2

PNEUMATIC AIR DRILL ADR-100

NITTO KOHKI PNEUMATIC HAND DRILL – AIR DRILL

MODEL: ADR-100

ADR-100

The power and performance you need to drill deeper and faster

  • Build-in silencer
  • Reversible
  • Variable speed adjustment
  • Rubber grip reduces chilled hand

Specifications

Max Drilling Capacity: 10 OD mm
Free Speed: 2.000 min-1
Air Consumption (No load): 0.67 m³/min
Mass (Weight): 1.1 kg
Rated Air Pressure: 0.59 MPa
Standard Accessories:
  • Drill Chuck: 1 pc. on the body
  • Chuck Handle: 1 pc.
  • Bushing PT1/4 x NPT1/4: 1 pc.
  • 3OSH: 1 pc.

Optional Accessory

  • Hanger: 1 pc.

A hanger to be mounted at the bottom of the grip is available as option.

 

Air Drill ADR-65 ADR-100

 

HITACHI FD 10SB DRILL 10mm

HITACHI FD 10SB DRILL 10mm / 430w

  • Fast Charging System.
  • LED job light with afterglow.
  • Conveniently located push button for forward and reverse.

hitachi-fd10sb-drill-220-240-volts-3.gif

SPESIFIKASI :

  • Kepala Bor : 1.0 – 10mm
  • Kapasitas : Besi 10mm
  • Kapasitas : Kayu 25mm
  • Daya Listrik : 450W
  • Kecepatan tanpa Beban : 2.800/min.
  • Panjang : 266 mm
  • Berat: 1.4 kg
  • Perlengkapan : Kunci Kepala bor

 

 

PRODUCT  LAIN UNTUK HITACHI – BEST SELLER :

HITACHI GRINDER HITACHI IMPACT DRILL HITACHI DRILLL HITACHI CORDLESS HITACHI DRILL

MAKITA 6412 REVERSIBLE DRILL 10mm

MAKITA 6412 LIGHT & EASY VARIABLE REVERSIBLE DRILL 10mm / 450w

Compact and lightweight, yet with enough power.

  • Ergonomically designed handle with rubberized grip and comfort
  • Chuck capacity: 1.5-10mm (1/6″ – 3/8″)
  • In-line design brings drilling pressure in line with center of drill bit axis.
  • All ball bearing construction ensures high durability.

MAKITA 6412

 

FEATURES

Heavy duty motor and compact body

850W Heavy duty motor
No load speed :1,300rpm
Compact: 228mm (9″) (6412)
Compact: 234mm (9-1/4″) (6413)

Reversing switch

Variable speed control by trigger switch

All ball bearing construction

Brings drilling pressure in line with center of drill bit axis.

Ergonomically designed rubberized grip

Provides more comfort and control while minimizing hand fatigue and pain.

In-line design

Brings drilling pressure in line with center of drill bit axis.

 

SPECIFICATION

Continuous rating Input 450W
Capacity Steel : 10mm (3/8″)
Wood : 25mm (1″)
No load speed 0-3,000rpm
Dimensions(L x W x H) 288mm x 64mm x 183mm
(9″ x 2-1/2″ x 7-1/4 “) : 6412
234mm x 64mm x 183mm
(9-1/4″ x 2-1/2″ x 7-1/4 “) : 6413
Net weight 1.2kg (2.6lbs)
Power supply cord 2.0m (6.6ft)

 

Standard equipment and Specifications may differ by country or area.

 

NITTO SUPER SAW SSW-110

NITTO KOHKI SUPER SAW HACKSAW SSW-110

SSW-110 SUPER SAW NITTO KOHKI

Special double-piston system achieved low vibration while cutting speed improved!!

SSW-110 has many feature on the followings……

  • Low vibration is achieved by the special design of double piston mechanism.
  • New adoption of piston rings minimized power loss and improved cutting efficiency.
  • Longer piston stroke improved cutting speed so much.
  • Rear exhaust system for chip-scattering-free operation.
  • New double-lock throttle lever prevents unintended.
  • Cutting Capacity : Max. plate thickness 3mm (for Mild Steel)

Specifications

Stroke: 11 mm
Stroke Speed: 7.000 min-1
Air Consumption (No load): 0.29 m³/min
Mass (Weight): 0.62 kg
Standard Accessories:
  • Saw Blade 32 : 2 pcs.
  • Hex. Socket Screw Key 3 : 1 pc.
  • Bushing PT1/4 x NPT1/4 : 1 pc.
SSW-110LargeFeatures

  • Ideal for sawing and trimming operations on sheet metal, aluminum, plastic and other materials
  • Suitable for automotive, fabrication, HVAC, electrical and woodworking applications
  • Ultra lightweight construction with low vibration performance
  • Optimized blade stroke for maximum cutting performance
  • Powerful dual piston construction
  • Locking throttle lever helps prevent accidental start-up
  • One year limited warranty

 

 Model SSW-110 Pneumatic Hacksaw

Pneumatic Hacksaw, ultra lightweight and low vibration
 Air Pressure 85 psi
 Air Consumption 10.2  CFM
 Strokes per minute 7,000 SPM
 Stroke Length 11mm (7/16″)
 Weight 1.37 lbs.
Accessories Included
  • Threaded Adapter PT1/4” x NPT1/4”
  • 3 mm Allen Wrench
  • (2) Sample 32 TPI Saw Blades
Optional Accessories
 
PN Description
TV7A005 32 TPI for Sheet Metal, Ferrous Metal (5 blades/set)
TV7A006 24 TPI for Ferrous Metal, Non- Ferrous Metal (5 blades/set)
TV7A007 18 TPI for Wood, Plastic, Non- Ferrous Metal (5 blades/set)
TV7A008 14 TPI for Wood, Plastic (5 blades/set)