PROMOTECH ABM-28 AUTO FEED BEVELING MACHINE

 

 

PROMOTECH ABM-28 AUTO FEED BEVELING MACHINE

Most important features include:

  • Auto-feed portable beveling.
  • Continuously adjustable bevel angle between 60 and minus 60 degrees, eliminating the need to turn a plate over
  • Max. bevel width (depending on the beveled angle) from 28 up to 35mm
  • Variable feed control for work on a variety of steel grades and thicknesses (up to 35 mm as standard or optionally up to 70mm)
  • Beveling in both travel directions
  • Motor overload protection
  • J groove beveling available as option
  • Quick setup
  • Extendable rails

The ABM-28 can perform beveling along steel plate’s edge in both travel directions eliminating hard physical work of the operator.

Required length of the guide track (rail) can be accomplished with additional sections of guide tracks.

 

 

 

 

 

 

 

PROMOTECH BM-21 HAND BEVELER MACHINE

 

 

Promotech BM-21

BM-21, new generation portable beveling machine, is one of the best tools for machining plates and pipes prior to welding. It offers a number of innovative solutions that increase ergonomics and ensure even more comfort and work safety for the operator.

Most important features include:

  • new single milling head equipped with 10 square inserts, that makes machining process far more efficient with little operator’s effort
  • fast and easy exchange of inserts with no need for special adjustment
  • extended working range from 0 to 60 degrees with continuous angle adjustment
  • easy setting of bevel angle and bevel width
  • vibration insulation protects both the operator and electronics against vibration
  • one universal guide plate for beveling both plates and pipes replaces 3 different attachments used with BM-20

 

SPECIFICATION
Power supply 230VAC/50Hz or 115 VAC/60 Hz
Induction motor with increased start-up current
Power 1100 W, BM-21S: 1600 W (for 50 Hz); 1800 W (for 60 Hz)
Spindle speed 2820 rpm, BM-21S: 1360–1630 rpm (at 230 V) and 1300–1560 rpm (at 115 V)
Tooling integrated milling head with 10 square TCT inserts
Beveling angle 0-60°with continuous angle adjustment
Max bevel width 21 mm
Weight 20 kg (43 lbs), BM-21S: 23 kg (51 lbs)

 

 

 

PROMOTECH BM-16 HAND BEVELER MACHINE

 

 

PROMOTECH BM-16 HAND BEVELER MACHINE

Made in POLAND

Portable, handy beveling machine is designed for milling edges of plates and pipes made of steel, aluminum alloys, brass, or plastic. Depending on the chosen milling head the machine enables beveling materials with minimum thickness of 1.5 mm (0.06’’) at the angles of 22.5°, 30°, 37.5°, 45°, 55°or 60°and with maximum bevel width of 16 mm (0.63’’).

Each milling head uses 5 indexable cutting inserts. One milling head for beveling radious enables beveling edges with radius of 3, 4 or 5mm with use of 4-sided indexable R3, R4 or R5 cutting inserts. Countersinking of holes with minimum 40 mm (1.57’’) diameter is also possible. BM-16 is equipped with continuous bevel width adjustment, overload protection and electronic speed control for use on a variety of materials. It is highly efficient machine for edge weld preparation and rounding off steel construction before painting or coating.

Promotech BM-16

BM-16 is a portable, handy beveler for beveling steel plates and pipes as well as aluminum alloys, brass, or plastics. It is equipped with continuous bevel width adjustment, overload protection and electronic speed control and is highly efficient machine for edge weld preparation and rounding off steel construction.

SPECIFICATION
Power supply 220-240 V / 50-60 Hz or 110-120V / 60Hz
Motor 2200W
Spindle speed (without load) 1800–5850 rpm
Maximum bevel width b=16 mm (0.63’’, Figure 1)
Bevel angle (depending on milling head) 22.5°, 30°, 37.5°, 45°, 55°, 60°(Fig.1)
Minimal diameter of countersinking ca 40 mm (1.57’’)
Rounding edges R3, R4, R5 (Fig. 2)
Dimensions (L x W x H) 585 mm (23.0’’) × 156 mm (6.1’’) × 238 mm (9.4’’)
Weight (without milling head) 10 kg (22 lbs)
Product code (220-240 VAC) UKS-0509-10-20-00-0
Product code (110-120 VAC) UKS-0509-10-10-00-0
Basic set:

  • BM-16 beveling machine without accessories (see list below)
  • Metal box
  • 32mm flat wrench
  • Allen wrench hex s=5
  • Allen wrench hex s=14
  • Operator’s Manual (English)