CIGWELD 206047 CUTSKILL CUTTING NOZZLE

CIGWELD CutSkill Cutting Nozzle, Oxy/Acet, Type 41, size 8

 

cigweld-206047

 

Part Number: 206047

These two seat designed nozzles are for use with CutSkill, COMET 3, Multi-purpose and sabre cutting torches. This type 41, Oxy/Acetylene nozzle is manufactured from copper. CutSkill nozzles combine Cigweld’s proven quality and performance with maximum cost effectiveness.

 

Features / Spesification:

Tip Size 8
Cutting Thickness 6-10 mm
Fuel gas flow @ 100 kPa 3.5
Total Oxygen Flow 20 l/min

 

 

 

CIGWELD COMET Cutting Nozzle, Oxy/Acet, Type 41, Size 8

CIGWELD COMET Cutting Nozzle, Oxy/Acet, Type 41, Size 8

 

comet-type-41-new

 

CIGWELD COMET Cutting Nozzle, Oxy/Acet, Type 41, Size 8

Part Number: 306047

Nozzles are the vital component of flame cutting equipment. They provide the preheating flames to raise the steel to ignition temperatures and direct the jet of oxygen onto the heated area to perform the cutting process.

 

Features

  • Longer Nozzle Life – the high brass content and advanced manufacturing techniques give COMET taper seat nozzles an inbuilt quality
  • Better quality cutting – the mirror smooth finish of the gas ports assures stable gas flows and superior cutting oxygen stream.
  • Cuts are clean and smooth with the narrowest kerf width Less slag adhesion – high copper content of sizes 20, 24 etc conducts heat away from the nozzle face.
  • The nozzle keeps relatively cool and slag adherence to the nozzle face is reduced.
  • LPG (propane) flames do not blow off – taper seat LPG nozzles have slotted preheat ports which cause a turbulence in the gas flow enabling the flame to hang on to the nozzles
  • Faster nozzle attachment – easy change of position for bent nozzles.
  • Only one nut is tightened to give perfect seating with taper seat nozzles
  • Wider seating areas ensures gas tight seals
  • Protective flange to safeguard tapered seat from damage

 

Specifications :

 

Type 41 Standard
Size 8HS
Plate Thickness 6-10mm
Fuel gas flow @ 100 kPa 3.5
Total Oxygen Flow &; Pressure l/min @ kPa 20 (200)

CIGWELD COMET Cutting Nozzle, Oxy/Acet, Type 41, Size 12

COMET Cutting Nozzle, Oxy/Acet, Type 41, Size 12

comet-type-41-new

 

 

CIGWELD COMET Cutting Nozzle, Oxy/Acet, Type 41, Size 12

Part Number: 306048

Nozzles are the vital component of flame cutting equipment. They provide the preheating flames to raise the steel to ignition temperatures and direct the jet of oxygen onto the heated area to perform the cutting process.

Features

  • Longer Nozzle Life – the high brass content and advanced manufacturing techniques give COMET taper seat nozzles an inbuilt quality
  • Better quality cutting – the mirror smooth finish of the gas ports assures stable gas flows and superior cutting oxygen stream.
  • Cuts are clean and smooth with the narrowest kerf width Less slag adhesion – high copper content of sizes 20, 24 etc conducts heat away from the nozzle face.
  • The nozzle keeps relatively cool and slag adherence to the nozzle face is reduced.
  • LPG (propane) flames do not blow off – taper seat LPG nozzles have slotted preheat ports which cause a turbulence in the gas flow enabling the flame to hang on to the nozzles
  • Faster nozzle attachment – easy change of position for bent nozzles.
  • Only one nut is tightened to give perfect seating with taper seat nozzles
  • Wider seating areas ensures gas tight seals
  • Protective flange to safeguard tapered seat from damage

Specifications

 

Type 41 Standard
Size 12
Plate Thickness 12-20mm
Fuel gas flow @ 100 kPa 4.0
Total Oxygen Flow &; Pressure l/min @ kPa 38 (200)