APPLETON CONDULET BODY LB27 3/4″ FORM7

FM7™ Unilet® Conduit Outlet Body, Type: Type LB27, Hub Size: 3/4 IN, Form: 7, Material: Copper-Free Aluminum, Finish: Epoxy Powder Coated,

SPECIFICATIONS

Type : CONDUIT BODY
Conduit Type : GRC / IMC
Item : BODY
Configuration Type : LB
Trade Size : 3/4 INCH
Body Material : IRON ALLOY
Material Specification : ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED GRAY IRON ALLOY BODY, NEOPRENE GASKET, STAINLESS STEEL COVER SCREW
Cover Type : WEDGE CLAMP TYPE
Form Type : 7
Conduit Connection : THREADED
Additional Information : FEDERAL SPECIFICATION W-C-586B
Application : IMC/RIGID CONDUIT
Installation : THREADED
Size : 5.19 INCH L X 2.5 INCH H
Access Opening : BACK
Number of Hubs : 2
Hub Location : 90 DEG
Brand Name : Appleton®, Unilet®

 

FM7 Unilet conduit bodies provide plenty of room for pulling cables and wiring connections. Accurately tapped tapered threads ensure tight, rigid joints and excellent ground continuity.

  • Smooth, rounded integral bushings in hubs protect conductor insulation
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity
  • Flat back design provides greater cubic content for easier wire pulling, and more room for splicing, fits flush and snug against flat surfaces for more stable installation
  • Smooth hub bushings and cover openings protect conductor insulation, smooth hub openings allow easy conduit joining
  • Hub size, body style, compliance data, maximum wire number/size and cubic capacity molded into body
  • Serve as pulling fittings
  • Make bends in conduit system
  • Provide openings for splicing
  • Connect and change direction of conduit runs
  • Allow connections for branch runs
  • Permit access to conductors for maintenance
  • Standards: UL standard 514A, 514B, UL file number E2527, CSA standard C22.2 number 18.3, CSA certified 065183
  • Applications: For use with rigid steel, rigid aluminum and IMC conduit

APPLETON CONDULET BODY LB27 3/4" FORM7

SPECIFICATIONS
Type : CONDUIT BODY
Conduit Type : GRC / IMC
Item : BODY
Configuration Type : LB
Trade Size : 3/4 INCH
Body Material : IRON ALLOY
Material Specification : ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED GRAY IRON ALLOY BODY, NEOPRENE GASKET, STAINLESS STEEL COVER SCREW
Cover Type : WEDGE CLAMP TYPE
Form Type : 7
Conduit Connection : THREADED
Additional Information : FEDERAL SPECIFICATION W-C-586B
Application : IMC/RIGID CONDUIT
Installation : THREADED
Size : 5.19 INCH L X 2.5 INCH H
Access Opening : BACK
Number of Hubs : 2
Hub Location : 90 DEG
Brand Name : Appleton®, Unilet®
 
FM7 Unilet conduit bodies provide plenty of room for pulling cables and wiring connections. Accurately tapped tapered threads ensure tight, rigid joints and excellent ground continuity.
  • Smooth, rounded integral bushings in hubs protect conductor insulation
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity
  • Flat back design provides greater cubic content for easier wire pulling, and more room for splicing, fits flush and snug against flat surfaces for more stable installation
  • Smooth hub bushings and cover openings protect conductor insulation, smooth hub openings allow easy conduit joining
  • Hub size, body style, compliance data, maximum wire number/size and cubic capacity molded into body
  • Serve as pulling fittings
  • Make bends in conduit system
  • Provide openings for splicing
  • Connect and change direction of conduit runs
  • Allow connections for branch runs
  • Permit access to conductors for maintenance
  • Standards: UL standard 514A, 514B, UL file number E2527, CSA standard C22.2 number 18.3, CSA certified 065183
  • Applications: For use with rigid steel, rigid aluminum and IMC conduit
]]>

APPLETON CONDULET BODY LB17 1/2" FORM7

SPECIFICATIONS

Type : CONDUIT BODY
Conduit Type : GRC / IMC
Item : BODY
Configuration Type : LB
Trade Size : 1/2 INCH
Body Material : IRON ALLOY
Material Specification : ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED GRAY IRON ALLOY BODY, NEOPRENE GASKET, STAINLESS STEEL COVER SCREW
Cover Type : WEDGE CLAMP TYPE
Form Type : 7
Conduit Connection : THREADED
Additional Information : FEDERAL SPECIFICATION W-C-586B
Application : IMC/RIGID CONDUIT
Installation : THREADED
Size : 4.56 INCH L X 2.25 INCH H
Access Opening : BACK
Number of Hubs : 2
Hub Location : 90 DEG
Brand Name : Appleton®, Unilet®
 
FM7 Unilet conduit bodies provide plenty of room for pulling cables and wiring connections. Accurately tapped tapered threads ensure tight, rigid joints and excellent ground continuity.
  • Smooth, rounded integral bushings in hubs protect conductor insulation
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity
  • Flat back design provides greater cubic content for easier wire pulling, and more room for splicing, fits flush and snug against flat surfaces for more stable installation
  • Smooth hub bushings and cover openings protect conductor insulation, smooth hub openings allow easy conduit joining
  • Hub size, body style, compliance data, maximum wire number/size and cubic capacity molded into body
  • Serve as pulling fittings
  • Make bends in conduit system
  • Provide openings for splicing
  • Connect and change direction of conduit runs
  • Allow connections for branch runs
  • Permit access to conductors for maintenance
  • Standards: UL standard 514A, 514B, UL file number E2527, CSA standard C22.2 number 18.3, CSA certified 065183
  • Applications: For use with rigid steel, rigid aluminum and IMC conduit
]]>

APPLETON CONDULET BODY LB17 1/2″ FORM7

FM7™ Unilet® Conduit Outlet Body, Type: Type LB, Hub Size: 1/2 IN, Form: 7, Material: Copper-Free Aluminum, Finish: Epoxy Powder Coated, Length: 4.56 IN, Height: 2-1/4 IN, Enclosure: NEMA FB1, Connection: FNPT, Wiring Capacity: 4 CU-IN As Per NEC 314.16(A)

SPECIFICATIONS

Type : CONDUIT BODY
Conduit Type : GRC / IMC
Item : BODY
Configuration Type : LB
Trade Size : 1/2 INCH
Body Material : IRON ALLOY
Material Specification : ELECTRO ZINC PLATED DICHROMATE EPOXY POWDER COATED GRAY IRON ALLOY BODY, NEOPRENE GASKET, STAINLESS STEEL COVER SCREW
Cover Type : WEDGE CLAMP TYPE
Form Type : 7
Conduit Connection : THREADED
Additional Information : FEDERAL SPECIFICATION W-C-586B
Application : IMC/RIGID CONDUIT
Installation : THREADED
Size : 4.56 INCH L X 2.25 INCH H
Access Opening : BACK
Number of Hubs : 2
Hub Location : 90 DEG
Brand Name : Appleton®, Unilet®

 

FM7 Unilet conduit bodies provide plenty of room for pulling cables and wiring connections. Accurately tapped tapered threads ensure tight, rigid joints and excellent ground continuity.

  • Smooth, rounded integral bushings in hubs protect conductor insulation
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity
  • Flat back design provides greater cubic content for easier wire pulling, and more room for splicing, fits flush and snug against flat surfaces for more stable installation
  • Smooth hub bushings and cover openings protect conductor insulation, smooth hub openings allow easy conduit joining
  • Hub size, body style, compliance data, maximum wire number/size and cubic capacity molded into body
  • Serve as pulling fittings
  • Make bends in conduit system
  • Provide openings for splicing
  • Connect and change direction of conduit runs
  • Allow connections for branch runs
  • Permit access to conductors for maintenance
  • Standards: UL standard 514A, 514B, UL file number E2527, CSA standard C22.2 number 18.3, CSA certified 065183
  • Applications: For use with rigid steel, rigid aluminum and IMC conduit

CMP SHROUD FOR CABLE GLAND

We will be introducing the new closed-end shroud design from 1st November 2016, customers may receive orders of existing OR new shrouds (however, orders will not include a mix of both), until early 2018, from which only the new design will be available. CMP Products’ shrouds minimise the risk of dirt or foreign substances gathering on the Cable Gland and point of cable to cable interface. LSF shrouds are Low Smoke & Fume (LSF), and Phosphorus Free to suit all CMP SOLO Cable Glands. Manufactured from low smoke, self-extinguishing, non-drip and halogen free material, these shrouds are rated UL94 V0 and are essential for areas where fire safety is key. CMP LSF shrouds and CMP SOLO Cable Glands meet the requirements of the London Underground Fire Safety Regulations and as such, they are LUL approved for use within the London Underground network. CMP Shrouds are available in a variety of colours, not all colours are available in all materials, please enquire for further information. Temperature ratings for CMP shrouds are as follows:

  • PVC -60°C to +90°C
  • LSF -60°C to +130°C
  • PCP -60°C to +100°C
Note: PCP shrouds are available, only in open-ended style and only in the colour black. VIDEO Cara Install Shroud [embedyt] https://www.youtube.com/watch?v=cw5dIHvNW7U[/embedyt]   DOKUMEN Cara Install Shroud – Download Gratis [embeddoc url=”https://store.surabayateknik.com/wp-content/uploads/2019/02/New-Shrouds.pdf” download=”all” viewer=”google”]        ]]>