NITTO KOHKI PNEUMATIC DEBURRING TOOL – BURR CUTTER
For deburring machined holes
- While gripping the lever, push the countersink into the machined holes to remove burrs.
- Optimum speed can be obtained by the adjust valve, resulting in clean deburred surfaces.
- Deburring work can be made wherever air source is available. No need to carry workpieces to a drill press.
|Air Pressure:||0.6 MPa|
|Air Consumption (No load):||0.22 m³/min|
|Motor Free Speed (rpm):||420 min-1|
|Deburring hole diameter:||3 to 34 mm|
|Countersink shank size:||6, 8, 10 mm|
|Mass (Weight):||0.75 kg|