ATAP TRANSPARAN SUNLOID POLYCARBONATE

Produk Atap Sunloid merupakan sebuah atap polycarbonate yang dikembangkan di negara jepang. Memiliki kualitas yang sangat baik dan tahan terhadap cuaca ekstrim negara tropis. Dengan ultraviolet protection, Atap sunloid ini mampu bertahan terhadap suhu panas hingga mencapai 130 C.

Atap Sunloid Polycarbonate memiliki berbagai pilihan macam warna yang bisa anda pilih dan anda sesuaikan untuk mempercantik rumah atau segala macam bangunan anda. Atap sunloid sendiri banyak sekali diaplikasikan sebagai atap rumah kaca, atap kolam renang, atap gazebo, atap garasi, atap clading, atap untuk jemuran dan masih banyak yang

 

ATAP TRANSPARAN SUNLOID POLYCARBONATE

 

PILIHAN WARNA ATAP SUNLOID

Bening / Clear, Bronze, Green, Grey, Blue, Silver Millenium, Opal / Putih Susu

SPESIFIKASI ATAP TRANSPARAN SUNLOID

  • Lebar efektif: 750 mm |
  • Tebal: 0.80 mm
  • Type : *Greca ( Kotak ) *Roma ( Bulat )

 

PANJANG ATAP SUNLOID TERSEDIA

  • a. 1800 mm
  • b. 2400 mm
  • c. 3000 mm
  • d. 3600 mm
  • e. 4200 mm
  • f. 6000 mm

 

CARA PEMASANGAN ATAP TRANSPARAN SUNLOID 

  • SUNLOID PC Corrugated memiliki lapisan tahan cuaca pada satu sisinya. Dengan demikian, pastikan dalam pemasangan jangan sampai terbalik, perhatikan label This Side Down harus ada di bawah.
  • Daya tahan yang istimewa terhadap suhu tinggi dan suhu rendah membuat lembaran SUNLOID tidak akan berupa bentuk walaupun langsung terkena sinar matahari sehingga dapat di pasang di tempat manapun.
  • Jangan menaiki secara langsung gunakan papan sebagai alas berpijak.
  • Bahan-bahan Kayu Sebagai Rangka Direkomendasikan bila menggunakan kayu kaso sebagai rangka, maka pilihlah kayu yang kaku dan kuat sehingga tidak terjadi defleksi selama pemasangan. Jika kaso di cat, maka pemasangannya harus menunggu cat kering.
  • Standar Overlapping SUNLOD Corrugated Dalam pemasangan, perlu diperhatikan overlapping untuk menghindari kebocoran. Overlapping gelombang ROMA 1.5 gelombang, Overlapping gelomgang GRECA 1 gelombang
  • Posisi pemasangan Screw Menghindari terjadi kerusakan pada SUNLOID Corrugated akibat kondisi angin yang tidak menentu, sebaiknya diperhatikan interval skrup yang mengacu pada gambar di bawah ini.
  • Posisi Over Hang Ukuran over hang ditentukan berdasarkan kondisi angin ditempat pemasangan. Sebaiknya jarak overhang untuk tempat dengan kondisi angin normal tidak lebih dari 100mm. Sedangkan untuk tempat dengan kondisi angin yang kuat, seperti pantai, sebaiknya overhang tidak lebih dari 50mm.
  • Pemasangan Melengkung Meskipun bergelombang, SUNLOID Corrugated dapat di pasang dengan bentuk melengkung/sedikit parabola.Namun dengan ketentuan yang di gambarkan di bawah ini.
  • Jenis-jenis Screw Screw yang digunakan tergantung dari bentuk rangka yang di gunakan.

 

brosur-2

brosur-3

 

TWINLITE X-3 Polycarbonate

Twinlite X-3®

Premium Quality Triple-wall Polycarbonate Roofing Sheet

Twinlite X-3® is a multi-layered polycarbonate sheet with the “X” structural strength to withstand heavy load yet still provides the light-weight feature – higher saving to the overall cost of the roofing structure.

It is especially designed to reduce more heat with considerable amount of light transmitted through.


Available Colors

To meet your architectural need, Twinlite X-3® comes with selected beautiful colors: Cool Bronze, Silver Millenium and Clear.

 

Cool
Bronze
Silver
Millenium
Clear

 

Advantages

  • Superior impact resistance
  • Better insulation properties
  • Reducing energy consumption and carbon footprint of a building

Applications

  • Skylights roofing
  • Siding
  • Partition
  • Billboard panels
  • Ceiling
  • Special effect floor

Light and Heat Transmission

Color Light Transmission Heat Transmission
Silver Millenium 4% 0.11%
Cool Bronze 10% 11.78%
Clear 73% 4.96%

 


Standard Sizes

Thickness
(mm)
Width
(meter)
Length
(meter)
Grams/m2
(grammage)
16 mm 2.1 Customized 2700

Co-Extruded UV Layer

Besides protecting the people underneath from the harmful UV rays, the co-extruded UV layer on Twinlite X-3’s surface enhances its durability outdoor, preventing it from getting yellowing or discolored and brittle for a long period of time.

How It Works

Twinlite X-3® reflects sunlight heat while at the same time still letting the light in; allowing people underneath to feel comfortable and to enjoy sufficient light.

Warranty

Twinlite X-3® is warranted for a period of ten years against excessive loss of light transmission and/or surface yellowing on the UV protected surface.

The warranty applies to Twinlite X-3® installed and maintained according to the manufacturer’s recommendations and specifications. Full warranty details are available from any authorized Twinlite X-3®distributor. It is important to retain the original receipt as proof of purchase for any warranty claim.

 

 

TWINLITE Polycarbonate

Twinlite®

twinlite polycarbonate sheet

Premium Quality Multi-wall Polycarbonate Roofing Sheet

For more than 20 years, we have been producing and improving Twinlite®, the premium multi-wall polycarbonate sheet, with the most advanced and proven technology to date. Twinlite® polycarbonate sheet is an ideal combination of lightweight and excellent impact resistance.

Twinlite®gives you peace of mind when entertaining outdoors. Twinlite® is manufactured using the latest co-extrusion UV resistant technology.

Twinlite® polycarbonate sheet offers superior clarity, durability, unmatched design flexibility and structural integrity that surpass other glazing material, Twinlite® is the right choice for almost any demanding glazing application.

Twinlite® double/triple wall feature makes it an excellent thermal insulation that will help save your air conditioning and heating cost. It provides more uniform temperatures throughout the space, hence producing more comfortable occupant environment.

With its superior performance and so many advantages beyond many kinds of roofing sheet, you have the right reason to choose Twinlite®.

polycarbonate


Available Colors

To meet your architectural need, Twinlite® comes with selected beautiful colors: Cool Grey, Cool Green, Cool Blue, Cool Bronze, Silver Millenium, Opal, Tosca and Clear.

 

 Cool Grey  Cool Green  Cool Blue  Cool Bronze
 Opal  Tosca  Clear  Silver
Millenium

8671Twin Lite 1

Advantages

  • Reduce heat without sacrificing light transmission
  • Absorbs almost 100% of sunlight UV radiation
  • Natural lighting, electricity and energy saving
  • 250 times stronger than glass and 20 times stronger than acrylic
  • Very light, very strong and virtually unbreakable
  • Withstand temperature changes from -20°C to 120°C

Applications

  • Transparent roofing for shopping centers, bus/train terminals & sports halls
  • Billboard displays, signage
  • Skylight
  • Greenhouses
  • Pool enclosures
  • Partition
  • Heat or sound insulation panels
  • Canopies, gazebos, pergolas, carports

Light and Heat Transmission

Color Light Transmission   Heat Transmission
Cool Grey 10% 22.96%
Cool Bronze 19% 28.51%
Silver Millenium 20% 7.25%
Cool Blue 26% 37.16%
Cool Green 33% 35.56%
Opal 33% 0.30%
Tosca 47% 44.39%
Clear 87% 60.31%

Above data applies for Twinlite 6mm only


Standard Sizes

Thickness
(mm)
Width
(meter)
Length
(meter)
Grams/m2
(grammage)
6 2.1 Customized 1300
10 2.1 Customized 1700
  16* 2.1 Customized 2700

*Available in triplewall, X structure

 

Installation

This page provides the basic information on the installation of TwinLite®. Please read and follow the installation’s instruction carefully before starting. For more detail information, please refer to Twinlite® manual installation book.


General

  • Always install TwinLite® sheets with Ultra Violet (UV) protected surface facing the sun. Ensure that the labeled side of the sheet is identified before installation.
  • Please ensure to remove the masking film from TwinLite® sheets after installation to prevent the masking film sticking to the sheet due to the heat exposure from sunlight.
 CAUTION: misplacing the UV side will void the warranty of the sheet.

Cutting the Sheet

Metal shears, a fine tooth saw, a circular saw with fine pitch blade. However in cutting phase, it would be better to use a cutter. Lay this sheet on a flat surface and care should also be taken to avoid scratching the sheets when handling.

Figure: Cutting the Sheet using a Cutter

Expansion Allowance

TwinLite® sheets are installed with rust proof fasteners and weather seals for each bar structures. Holes should be drilled at the range of 2 mm from the diameter of fasteners as this allows for thermal expansion during noontime and contraction at night. The number of fasteners used should be in accordance with the specification of the profile being used.

 

  Figure: Screw Button Installation

Edges Sealing

Sealing the open-ended channels is very important since moisture build-up and dust contamination inside the channels can be a major problem.

  • Seal the top end channels with an impermeable tape, while bottom end channels sealed with a perforated filter tape.
  • Additional `U’ profile covering perforated bottom tape
  • Care should be taken to provide a clearance between both sheet edges and sash platform to allow for condensation drainage.
 Figure: Installation of U Profile

Joining the Sheets

Using H Polycarbonate Profile

You can use H profile made of polycarbonate sheet or aluminium.

Using Aluminum Profile

Gaskets

Neoprene, TPE, or EPDM rubbers with an approximate shore hardness of A65 are recommended for their compatibility.

NEVER USE PVC gaskets. PVC is incompatible with polycarbonate, and will harm the panel. Damage caused by this will nullify the warranty.


Sealants

Prior to using sealant, please ensure their chemical compatibility with polycarbonate.


Positioning the Sheets

Prior to using sealant, please ensure their chemical compatibility with polycarbonate.TwinLite® sheets should be installed with the rib in the direction of the slope (flat), vertical (partition), or following the direction of the arched rafters (dome). This position reduces accumulation of dirt inside the sheet and ease gravity drainage of condensation moisture.

For the sheets installed in the clamped, horizontal position, (Roofs, overhead skylight), a minimum slope of 5 percent is recommended. Steeper slope offer better rainwater drainage and self cleaning, and lessen the risk of water and dirt filtration through the connectors and fastening screw. They also help to diminish the visual effect of sheet deflection due to the loads.


Arched Installation

The following is the recommended the sheet’s radius of arched storage and installation.

Product Sheets
Thickness
(mm)
Recommended
Radius (r)
(mm)
TwinLite® 5 750
6  900
10 1500
TwinLite X3® 16 2800

Table & Figure: Recommended Radius of Arched Storage & Installation


Cleaning

Should cleaning be required, simply wet the sheet with water, use a mild household detergent, a soft clean cloth or soft sponges, then hose off.

Only use regular non-alkaline soaps.

CAUTION: Please avoid the usage of thinner, gasoline or strong acids

SolarTuff PolyCarbonate

Corrugated Sheety – SolarTuff PolyCarbonate
solartuffheader
Our Corrugated sheet products is the premium corrugated polycarbonate sheet with superior transparency and toughness, absolutely the perfect roofing and glazing solution to your architectural needs. Engineered with the most advanced European technology and selectively the best grades of plastic resins, our corrugated products comes in light-weight, yet virtually unbreakable characteristic, qualifying itself to withstand severe weather condition and unpredictable climate changes.

General Properties
^    250 times stronger than glass and 20 times stronger than acrylic
^    Reduce heat without sacrificing light transmission
^    Natural lighting, electricity and energy saving
^    Environment – friendly
^    As transparent as glass
^    Easy to install and fabricate
^    Fire retardant ( Class 1 category )
^    Withstand temperature changes from -20 C to 120 C

solar tuffOn top of it all, easy installation, high design flexibility and various attractive colors make our corrugated sheet products the perfect roofing and glazing secret to express your unique design and architectural creativity and imagination.

Our corrugated sheet products is ultra-violet layered, which suits many application like: green house, swimming pool, gazebo, canopy, carport, cladding, skylight, terrace, pergolas, skyroofing and industrial structures.

Cautions: Please avoid the use of thinner, gasoline or strong acid.

Installation

  1. Always install SolarTuff with the UV protected surface to the sun. For easy identification, a label indicating the non-UV side has been placed on the underside. Ensure the labeled side of the sheet is identified before cutting as it is not possible to determine the UV protected side once the sheet is cut.
    Caution : wrong side installation willvoid thewarranty.
  1. Please overlap each sheet of SolarTuff minimum at 10 cm from sheet length direction and minimum one corrugation to either sides (left & right).
  2. The maximum overhang distance is 100cm for SolarTuff.
  1. SolarTuff is installed with rust proof fasteners and weather seals for each bar structures and drill holes at range of 3 mm – 5 mm from the diameters offastener. This will allow for thermal expansion during noon time and contraction at night.

 

SolarTuff-Polycarbonate-Sheet-2

Application
SolarTuff is ultra-violet layered, which suits manyapplications like:

  • Green House
  • Swimming Pool
  • Carpot
  • Cladding
  • Skylights
  • Terrace
  • Pergolas
  • Skyroofing
  • Industrial Structures

Caution:
Pleaseavoid the use of thinner, gasoline or strong acid.

solartuff-
SolarTuff Premium Corrugated Polycarbonate Roofing
SolarTuff is the premium corrugatedpolycarbonate sheet with superior transparency and toughness, absolutely theperfect roofing and glazing solution to your architectural needs.

Engineered with the most advancedEuropean technology, and selectively the best grades of plastic resins,SolarTuff comes in light-weight, yet virtually unbreakable characteristic,qualifying itself to withstand severe weather condition and unpredictableclimate changes.

General Properties

  • 250 times stronger than glass and 20 timesstronger than acrylic.
  • Reduce heat without sacrificing lighttransmission.
  • Natural lighting, electricity and energy saving.
  • Environment-friendly.
  • As transparent as glass
  • Easy to install and fabricate
  • Fire retardant
  • Withstand temperature changes from -20C to 120C.

You can be your own architect
On top of it all, easy installation, high designflexibility, and various attractive colors make SolarTuff the perfect roofingand glazing secret to express your unique design and architectural creativityand imagination.

SolarLite Polycarbonate

64SOLARLITE
SolarLite merupakan lembar polycarbonate berkualitas yang sangat pas dipadukan dengan rumah Anda, baik untuk interior maupun exterior.

Selama bertahun-tahun SolarLite telah dipergunakan untuk canopy, garasi mobil, skylight sampai ke partisi ruangan bahkan lampu dan dinding. Dari rumah, perkantoran, apartemen, kolam renang, mall, sekolah sampai dengan pameran.

solarlite
Dengan demikian banyaknya aplikasi SolarLite, Anda tdak perlu ragu lagi. Kapanpun dan apapun aplikasi Anda, pastikan SolarLite merupakan pilihan Anda.

Pilihan Lengkap Fasilitas Lengkap

SolarLite diproduksi dengan ketebalan 5 mm dan 5 warna pilihan yang indah dan modern untuk berbagai jenis nuansa warna yang bisa diterapkan pada rumah Anda.

Twinlite-table

TwinLite PolyCarbonate

twinlite

A PERFECT COMBINATION OF TECHNOLOGY, QUALITY & BEAUTY

For more than 15 years, we have been producing and improving Twinlite, the premium multi-wall polycarbonate sheet, with te most advanced and proven technology to date. Twinlite polycarbonate sheet is an ideal combination of lightweight and excellent impact resistance.

Twinlite polycarbonate sheet offers superior clarity, durability, unmatched design flexibility and structural integrity that surpass other glazing materal. Twinlite is the right choice for almost any demanding glazing application.

Twinlite double/triple walls feature makes it an excellent thermal insulation that will help saving your air condition cost. It provides more uniform temperatures through out the space, hence producing more comfortable occupant environment.

TWIN LITE

With its superior performance and so many advantages beyond many kinds of roofing sheet, you have the right reason to choose Twinlite.

To meet your architectural need, Twinlite comes with selected beautiful colors: Cool Grey, Cool Bronze, Cool Green, Cool Blue, Silver Millenium, Opal, Tosca and Clear.

LIGHT & HEAT TRANSMISSION

table-twinlite-1
Above data applies for Twinlite 6mm only

STANDARD SIZE

standard-size TWINLITE

hollow twinlite 20140519120357

ADVANTAGES OF TWINLITE POLYCARBONATE

  • Reduce heat without sacrificing any light
  • Absorb almost 100% of sunlight UV radiation
  • 250 times stronger than glass and 20 times stronger than acrylic
  • Very light, very strong, and virtually unbreakable
  • Withstand temperature changes from -20°C to 120°C
  • Ten years limited warranty against loss of light transmission

 

KEUNGGULAN ATAP POLYCARBONATE TWINLITE

 

SolarFlat Solid Polycarbonate Sheet

45SolarFlat

Unmatched High Clarity, Strength, and ImpactResistance

SolarFlat solid form delivers high clarity(transparency of glass) combined with strength and Impact resistance. SolarFlatcan be cold bent, fabricated or formed, also ideal as safety glazing and machineguards.

Natural solar lighting penetration skylightsand sidelights, even on cloudy days, provides a cost effective andenvironmentally friendly alternative to relying solely on incandescent evenfluorescent artificial lighting.

Besides clarity and strength, SolarFlat alsospecially designed to give you the flexibility in curving in any direction,forming and fabricating, and hence you can create architecturally attractivedomes and arched skylights that still retains its attractive appearance over a longtime.

Solar Flat

 

SolarFlat solid form delivers high clarity(transparency of glass) combined with strength and Impact resistance. SolarFlatcan be cold bent, fabricated or formed, also ideal as safety glazing andmachine guards.

11solarflatNatural solar lighting penetration skylightsand sidelights, even on cloudy days, provides a cost effective andenvironmentally friendly alternative to relying solely on incandescent evenfluorescent artificial lighting.

Besides clarity and strength, SolarFlat alsospecially designed to give you the flexibility in curving in any direction,forming and fabricating, and hence you can create create architecturallyattractive domes and arched skylights that still retains its attractiveappearance over a long time.

Every SolarFlat comes with UV protection andguaranteed against leakage and fungsus to give you a healthier environment.

To Further accommodates modern roofing needs,SolarFlat also comes in various thickness, choices of up-to-date colors andtexture to suit any kind of architecture for your home and office.

Solarflat-page-3-2

Features and benefits:

  • High clarity and light transmission
  • High impact resistance, virtually unbreakable
  • Weather and UV resistant
  • Light weight, easy to handle and install
  • Acoustical insulation
  • Versatile, formable and machinable
  • Easy to clean

Typical Applications:

  • Attractive domes, skylights, glazing in public buildings, safety and security glazing.
  • Protective shields for machines
  • Sign boards, signage, and light fixtures
  • Thermoformed and fabricated items

spesifikasi solarflat