MAKITA DHR242RME CORDLESS ROTARY HAMMER 24mm

MAKITA DHR 242RFE CORDLESS Li-ion  3-MODE ROTARY HAMMER 24mm / 18V  With LED

18V Mobile Brushless Rotary Hammer

MAKITA DHR242RME
  • Brushless DC motor helps to reduce energy loss by 30%
  • One touch sliding SDS Plus type chuck
  • Variable speed control by trigger
  • Torque limiter
  • Easy to grip handle ergonomically designed to provide a sure and comfortable grip in any application
  • Natural position on mode selector provides 40 different bit angle settings
  • 3 mode operation:- Rotation+Hammering, Hammering only, Rotation only
  • Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures
  • The tool body is separated into the upper and lower housings with vibration absorbing cushion rubbers
  • Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

 

SPESIFICATIONS:

Drive Shank SDS Plus Type
Impact Rate 0-4,700
Joules 2.0j
Net Weight 3.3kg
No Load Speed 0-950rpm
Overall Length 328mm
Specifications – Capacity – Concrete 24mm
Specifications – Capacity – Steel 13mm
Specifications – Capacity – Wood 27mm
Vibration (m/s2) 13.5
Voltage 18V

 

 

MAKITA DHR165RME CORDLESS ROTARY HAMMER

MAKITA DHR 165RME CORDLESS Li-ion  2-MODE ROTARY HAMMER with LED  16mm/18V

MAKITA DHR165RME

SPESIFICATION:

  • 2 mode unit – Drilling & Hammer Drilling utilising SDS-PLUS bits
  • Variable speed control via trigger
  • Compact ergonomical design for fatigue free use
  • Torque limiter (clutch) protects operator if drill bit jams
Specifications
Shank type SDS plus
Capacities
– Concrete 16mm
– Steel 13mm
– Wood 24mm
Impacts per minute 0-5,300ipm
No load speed 0-1,600rpm
Overall dimensions 297mm
Net weight 2.2kg
Voltage 18V
Carbon brush 441

 

 

MAKITA HR2810 – SDS ROTARY HAMMER 28mm

MAKITA HR2810 – 3 MODE CONTRACTOR SDS ROTARY HAMMER 28mm / 800w

Makita HR2810-1c

ighest-in-class efficiency in both drilling and chipping.

– 3 operation modes – hammering, hammering with rotation, rotation.

– Compact L-shaped motor housing.

– One-touch sliding chuck for easy bit change.

– Ergonomically designed handle with rubberized soft grip provides more control and comfort.

– Double Insulation, Variable Speed, Reversing, SDS Plus, Torque Limiter and Carry Case. Tool sold without bit.

MAKITA HR2810

Specifications
Continuous rating input
800W
Capacity
Concrete(With TCT bit): 28mm Steel:13mm Wood:32mm
Impacts per minute
0 – 4,500
No load speed (r/min)
0 – 1,100r/min
Dimensions (L x W x H)
314 x 89 x 225mm
Net weight / Power supply cord
3.4kg / 2.5m

 

 

 

 

 

 

 

MAKITA HR2230 – SDS ROTARY HAMMER 24mm

HR2230

MAKITA HR2230 – BEST SELECTION SDS ROTARY HAMMER 24mm / 780w

 

FEATURES

High durability

• Added durability to impact bolt

• Large seal ring eliminates grease leakage from matching surface between inner housing and gear housing.

• Varnish on armature protects from dust and wire-breakage.

Rotation reversing system using brush holder unit

• Protects Carbon Brush from foreign dusts and debris.
• Life of Carbon Brush is 2.7 times long as the existing models.
• Same speed and torque even in reverse rotation
• Saves time and labor for repair thanks to simplified wiring.

Dual operation modes

Rotation + Hammering with Rotation

One-touch sliding chuck

For easy bit changes

Torque limiter

When drill bit hits against reinforcements, torque limiter operates to stop.

No hammering when Idling

Ensures machine’s long life.

1. Lock-on button

For continuous operation

2. Variable speed

Bumper

Protects the surface of workpiece and machine.

Rubberized grip

Provides more control and comfort.

SPECIFICATION

Continuous rating Input 710W
Capacity Concrete : 22mm (7/8″)
Steel : 13mm (1/2″)
Wood : 32mm (1-1/4″)
Impacts per minute 0 – 4,050ipm
No load speed 0-1,050rpm
Dimensions
(L x W x H)
357 x 84 x 214mm
(14″ x 3-5/16″ x 8-3/8″)
Net weight 2.4kg (5.4lbs)
Power supply cord 2.5m (8.2ft)

 

Standard equipment and Specifications may differ by country or area.