Thomas & Betts 5353 3/4″ 90deg Liquidtight Angle Connector Elbow, Insulated Steel

TB 5353

3/4″ T&B Malleable Iron Insulated Liquidtight Flexible Metal Conduit 90° Angle Fitting (Elbow)

Simple Description :
Item Number: 5353
Manufacturer: Thomas & Betts
Item Category: Fittings
Subcategory: Conduit and Cable Connectors
Series: 52/53
Conduit/Cable Type: Liquid Tight FMC (Flexible Metallic Conduit)
Connection Type: Compression
Angle: 90 Deg
Trade Size: 3/4 in
Hub Size: 3/4 in
Grounding Lug: No
Insulated Throat: Yes
Jacketed: No
Material: Malleable Iron Insulated
Composition: Metallic
Max. NEMA Rating: FB1
Approvals: UL;CSA
Hazardous Rated: No
H x W x D (in.): 2.45 x 2.35 x 1.5
Net Weight: 5.92 OZ
Gross Weight: 5.92 OZ

 

DETAIL DESCRIPTION :

  • Hub Size: 3/4″
  • Conduit Size: 3/4″
  • Material: Steel
  • Sealing Ring and Insulator: All Thermoplastic
  • Sealing Gasket: Stainless Steel and Santoprene
  • Finish: Electro Zinc Plated with Chromate Coating

Application

  • Used where flexible metal raceway is installed in outdoor or indoor locations where exposed to continuous or intermittent moisture
  • To positively bond conduit to box or enclosure

Features:

• Ability to install quickly with low torque effort.
• Ground cone design offers following advantages:
(1) Compresses metallic convolutions; provides high quality ground contact with low impedance and high raceway holding power.
(2) Single helical thread on ground cone is easy to install without cross threading; accepts variations in raceway diameters and
convolution pitch.
(3) Rolled over edge protects conductors.

Sealing ring design has following exclusive features:
(1) Grips and seals at leading and trailing edge—will not abrade raceway jacket.
(2) Provided with grooves on inside diameter for anti-sleeving.
(3) Shoulders on both ends for extra sealing.
(4) Symmetrical shape assures foolproof assembly.

• Can be disconnected and reused
• Watertight/oiltight installation at box or enclosure termination is assured by:
(1) External taper thread hub on 5331 series and use of sealing gasket 5262 series.
(2) Captive sealing ‘O’ ring on 5361 series.
(3) Taper tapped hole on 5271series.

• Suitable for use in Class I Division 2, Class II Division 1 and 2 and Class III Division 1 and 2 Hazardous Locations per CEC Section 18.
Class I, Zone 2, CEC Rule 18-156 (6)
Class I, Div. 2, CEC Rule J18-152 (3)
Class II, Div. 1 CEC Rule 18-202 (4) (b)
Class II, Div. 2, CEC Rule 18-252 (4)
Class III, Div.1 CEC Rule 18-302 (4)
Class III, Div. 2 CEC Rule 18-352
• CEC Rule 12-1306 stipulates “a separate bonding conductor shall be installed in liquidtight flexible conduit in accordance with section 10”.
• 1/2” and 1-1/4” sizes Laboratory tested to carry ground fault current of up to 1000 amps RMS with duration of fault current 3 cycles.
• Conforms with JIC requirements.
• Available with imperial, I.S.O. and PG threaded hub.

 

 

3/4″ Connector Flexible Conduit T&B

T&B 5333 conector flexible conduit

 

Thomas & Betts 5333 Straight Insulated Liquidtight Connector; 3/4 Inch, Steel, Electro-Plated Zinc/Chromate Coated, Tapered Threaded

Product Details
Dimension: 1-5/8 Inch Length x 1-21/32 Inch Height

Thomas & Betts Liquidtight flexible metal connector features steel construction with electro zinc plating/chromate coating for durability. It is suitable to install metal raceaway in indoor or outdoor locations. It measures 1-5/8 Inch x 1-21/32 Inch. Straight insulated connector has a trade size of 3/4 Inch. It has the capability to install quickly with low torque effort. Connector is UL listed and RoHS compliant.

Product Specifications
Application For Positively Bonding Conduit To Box Or Enclosure
Applications 1 To positively bond conduit to box or enclosure.
Brand Name Thomas & Betts
Color Gray
Commodity Code 2410
Conduit Size (in.) 3/4
Connection Tapered Threaded
Connector Type Straight
Dimension 1-5/8 Inch Length x 1-21/32 Inch Height x 9/16 Inch Thread Length
Finish Electro-Plated Zinc/Chromate Coated
Height (in.) 1-21/32
Item Liquidtight Connector
Length (in.) 1.69
Material Steel
Material of Construction Steel
Mfr/Vendor Thomas & Betts (T&B)
Order Minimum 25
Product Type Conduit Connector
ShipWeight 0.3
ShortDescriptionStripped Thomas-Betts-5333-Straight-Insulated-Liquidtight
Special Features Ability to install quickly with low torque effort
Standard E 23018
Standards UL File E23018, UL 514B, CSA C22.2 No. 18.3, NEMA FB-1, NFPA 70-2008 (ANSI), JIC EGP1, JIC EMP1, Federal Specification W-F-406, Federal standard H-28 (Threads), RoHS Compliant
Throat Type Thermoplastic Insulated
Trade Size 3/4
Type Straight, Insulated
UPC 786210053332
Used On Flexible Metallic Liquid Tight Conduit
Weight 0.25
feature#1 Ability to install quickly with low torque effort.
feature#2 Rolled over edge protects conductors
feature#3 Grips and seals at leading and trailing edge
feature#4 Shoulders on both ends for extra sealing
feature#5 Can be disconnected and reused
feature#6 Insulated Throat

1-1/4″ HUB Conduit T&B

THOMAS & BETSS  HUB CONDUIT  – Liquidtight Flexible Cord & Cable Fittings

T&B-HUB-conduit

 

Description:
1-1/4 in. straight die cast zinc liquidtight strain relief cord connector, cord range-.1.065 – 1.205.
Features
  • Throat inner diameter is nylon coated for ease of wire pull
  • Extended range with superior strain relief
Application
  • Provide means for passing a cord cable, armored or unarmored, into an enclosure, through a bulkhead or into a rigid conduit
General
Material Die Cast Zinc
Dimension Information
Hub Size (inches) 1-1/4
Cord Range (inches) 1.605 – 1.205

1/2″ HUB Conduit T&B

THOMAS & BETSS  HUB CONDUIT  – Liquidtight Flexible Cord & Cable Fittings

T&B-HUB-conduit

Description:
1/2 in. straight die cast zinc liquidtight strain relief cord connector, cord range-.125-250
Features
  • Throat inner diameter is nylon coated for ease of wire pull
  • Extended range with superior strain relief
Application
  • Provide means for passing a cord cable, armored or unarmored, into an enclosure, through a bulkhead or into a rigid conduit
General
Material Die Cast Zinc
Dimension Information
Hub Size (inches) 1/2
Cord Range (inches) .125-250

3/4″ HUB Conduit T&B

THOMAS & BETSS  HUB CONDUIT  – Liquidtight Flexible Cord & Cable Fittings

T&B-HUB-conduit

Description:
3/4 in. straight die cast zinc liquidtight strain relief cord connector, cord range-.500-.625.
Features
  • Throat inner diameter is nylon coated for ease of wire pull
  • Extended range with superior strain relief
Application
  • Provide means for passing a cord cable, armored or unarmored, into an enclosure, through a bulkhead or into a rigid conduit
General
Material Die Cast Zinc
Dimension Information
Hub Size (inches) 3/4
Cord Range (inches) .500-.625

T&B Conduit – Introduction & Product Catalog

tb-conduit

T&B Fact :

From power transmission lines crisscrossing the countryside, local service entrance connections, outlet boxes in the wall, electrical conduit in the ceiling, our products help control the constant – and increasing – flow of electrical power and data. We offer one of the broadest product ranges in the industry, supplying over 70% of the items used in a typical electrical application – be it commercial, industrial or residential construction, equipment maintenance and repair or original equipment manufacturing. We also provide market-leading commercial heating and ventilation products, connectivity solutions for cable TV, protection against voltage surges and lightning and emergency lighting.
Whether hidden behind walls or concealed inside machinery or appliances, it’s a good bet that T&B products are present wherever electricity is required.
tb-conduit-fittings

Thomas & Betts is committed to delivering innovative, high quality products that lower the installed cost for electricians, contractors, technicians, engineers and other professionals in our core markets. Our global family includes some of the best-known brand names in the construction, industrial, communications, retail electrical and OEM industries.

Thomas & Betts offers more than 30,000 high-quality products marketed under a variety of market-leading brand names. Designed to help passively conduct electricity, Thomas & Betts products are found everywhere electricity is used — inside commercial and industrial buildings, in homes and schools, inside complex machinery and original equipment, in the power generating plant and distribution network, outside your home and underground.