TONE AI4160 AIR IMPACT WRENCH 1/2″ DRIVE

TONE – Air Impact Wrench (Twin Hammer) – 12.7mm (AI4160) JAPAN

Suitable for changing tires of vehicles, and maintaining heavy machines including construction machinery.

For attaching and detaching bolts / nuts in every industrial field.

Features:

Alloy aluminum hammer case

Siebel inlet prevents the inlet rotation from twisting hose

Output torque is adjdsted by a trigger switch

Special reinforced plastic body

Comfort grip absorbs shock

CW Rotation: 3 position output torque control

CCW Rotation: 2 position output torque control

 

Specifications:

Rated Max Torque: 470N•m

No-load Speed: 10,000min-1[rpm]

Air Pressure: 0.62MPa

Max Air Consumption: 845 l / min (ntp), 128 l / min (op)

Air Inlet: Rc1/4 (PT1/4)

Air Hose Inner Dia.: 10mm <

Adaptable Bolts: M16 (Auto Wheel Nut)

Weight: 1.2kg (Main Body)

Accessories: plug, oil, instruction manual (Japanese)

 

Product specifications:
· Overall length: 167 mm
· Full width: 60 mm
· Height: 170 mm
· Air pressure used: 0.62 MPa
· Air consumption: 930 L / min (when no load is applied)
· Air consumption: 128 L / min (* When under load)
· No-load rotation speed: 10000 rpm
· Maximum torque for normal use: 470 N · m
· Insertion angle: 1 / 2DR (12.7 sq)
Inlet: 1/4 PT
· Body weight

 

 

● Small and lightweight high power air impact wrench with maximum torque of 470 N · m, mass of 1.2 kg. Adopting twin hammer, realize high power with small size. With forward rotation 3 steps, reverse rotation 2 step output adjustment lever included. The stepless output adjustment is also possible by the degree of drawing of the switch. A rugged magnesium hammer case, a special reinforced resin is adopted for the body, realizing weight saving. It adopts a soft grip that softens grip and softens vibration. With rotary joint to prevent twist of hose

 

 

 

TONE AI6300 AIR IMPACT WRENCH 3/4″ DRIVE

FEATURES:

– Small and achieved power.
– Blow a steady, low-recoil mechanism has been adopted.
– Stepless output adjustment is possible in switch rearward.
– Rotating joints prevent twisting of the hose has been adopted.
– Special reinforced resin body with magnesium hammer case realized weight reduction.

 

SPESIFICATION:

– Angular socket plug-ins (mm):19.0
– Hammer type: twin hammer
– hose replacing mouths:Rc3/8 (PT3/8)
– Air consumption ([[cubic meters]] /min):1.3
– The big tightening with torque (N-m): 1600
– Overall length (mm): 220
– Capacity bolt diameter (mm): 30
– Exhaust: downward
– No load speed (RPM): 5750
– Mass (kg):3.2
– Use air pressure:0.62MPa

 

 

 

TONE AIS8330L AIR IMPACT WRENCH STRAIGHT TYPE

For the tire exchange work of the trailer bus truck and the maintenance of a heavy industrial machine, the construction machine.

 

FEATURES:

● It is excellent at stability on a side grip.
● The pull way of the switch enables the output adjustment of no stage.
● It is most suitable for the work that is profound by a long anvil type.
● I realized lightweighting by a hammer case made of aluminum alloy and a special reinforcing resins body.

 

SPESIFICATION:

● Ability bolt diameter (mm): 33
● Socket plug corner (mm): 25.4
● The biggest clamping torque (N, m): 2100
● No load number of revolutions (rpm): 4500
● Air consumption ([[cubic meter]] /min): 1.51
● A hose installation mouth: Rc1/2 (PT1/2)
● Full length (mm): 477
● A hammer type: Twin hammer
● No load number of revolutions (]] that -1 of min [[takes advantage): 4500
● Mass (kg): 7
● Use air pressure: 0.62MPa
● Common use biggest torque (N, m): 2100