CIGWELD Flint Lighter, Cup type single flint
PN: 308789
Metal Cup Type with replaceable flint. Ensures quick, easy lighting up
SPESIFICATION:
Description Gas mixing cutting nozzle.
| Des. | Article no. | Cutting range | Cutting speed | Pressure Mpa(Kgf/cm 3 ) | Consumption (m 3 /h) | Kerf Width (mm) | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| mm | mm/min. | Cutting O 2 | Heating O 2 | Acetylene | Cutting O 2 | Heating O 2 | Acetylene | |||
| 00 | DB11285B | 0-5 | 660 | 0.15(1.5) | 0.15(1.5) | 0.02(0.2) | 0.69 | 0.41 | 0.37 | 1 |
| 0 | DB11285C | 5-10 | 660-550 | 0.2(2.0) | 0.2(2.0) | 1.2 | 1.3-1.5 | |||
| 1 | DB11285D | 10-15 | 550-490 | 0.25(2.5) | 0.25(2.5) | 2.1 | 0.48 | 0.43 | 1.7-1.8 | |
| 2 | DB11285E | 15-30 | 490-400 | 0.3(3) | 0.3(3) | 3.4 | 2.0-2.1 | |||
| 3 | DB11285F | 30-40 | 400-350 | 4.3 | 2.3-2.4 | |||||
| 4 | DB11285G | 40-50 | 350-320 | 0.35(3.5) | 0.35(3.5) | 0.025(0.25) | 6.5 | 0.55 | 0.5 | 2.7-2.9 |
| 5 | DB11285H | 50-100 | 320-200 | 0.4(4.0) | 0.4(4.0) | 0.03(0.3) | 11 | 0.69 | 0.63 | 3.4-3.5 |
| 6 | DB11285J | 100-150 | 200-150 | 0.035(0.35) | 15 | 0.77 | 0.7 | 3.9-4.0 | ||
| 7 | DB11285K | 150-250 | 150-80 | 0.45(4.5) | 0.45(4.5) | 0.04(0.4) | 22 | 1.06 | 0.96 | 4.4-5.1 |
| 8 | DB11285L | 250-300 | 80-45 | 28 | 5.8-6.8 | |||||
CIGWELD COMET S/heating Tip SHP2 Oxy/LPG Size36x12HT PART NUMBER: 307119 Features: – Provides efficient, economical high intensity heat – Heavy copper head for heat and wear resistance – Spanner adjustable flats milled into tip – Gas pressure and identification stamped on every tip PRODUCT INFORMATION: Gas Consumption (Fuel) 75 l/min Gas Consumption (Oxy) 300 l/min Heat Output 420 MJ/HR Operating Pressure (Fuel) 100 kPa Operating Pressure (Oxy) 600 kPa Tip Size 36×12]]>
MESIN LAS LAKONI FALCON 160A /160e
SPESIFICATION:
| Voltase | 220V/50Hz |
| Daya Listrik | 900 – 1300 Watt |
| Arus Output | 30 – 160 Ampere |
| Diameter Kawat Las | 2.0 – 4 mm |
| Ukuran Soket | 25mm |
| Pendingin | Kipas |
| Duty Cycle | 60% (pada 160A), 100% (pada 120A) |
| Kelengkapan | Pemegang Elektroda, Earth Clamp, Kabel Las, Kedok Las dan Kaca. |
| Garansi | 1 tahun |
]]>
CEBORA INVERTER MMA – POWER ROD 131
The POWER ROD 131 MMA inverter power source (art. 256) is suitable for MMA welding of all rutile basic electrodes AWS 7018, in stainless steel and aluminium.
The power source is distinguished by a shockproof plastic casing which has made it possible to reduce weight to just 4.5 kg, along with relevant dimensions.
This is a single-phase inverter power source (230V) for MMA and TIG DC welding (with Cebora Lift ignition, using the TIG Cebora T150 torch, art. 1567.01). It can weld electrodes of up to Ø 3.25 and has a duty cycle of 130A at 30% (which becomes 100A at 100%).
It is ideal for maintenance and repair works thanks to its lightweight and shockproof plastic casing which makes it suitable for use in many different operating conditions. It features a shoulder strap for easier transport.
The compliance with EN 61000-3-12 brings substantial energy saving and a wide supply voltage tolerance (+15% / -20%).
The power source can be powered by motor generators of adequate power (Min. 6 KVA).
| Art. | 256 | Specifications |  |
|---|---|---|---|
 |
230V 50/60 Hz + 15% / -20% |
Single phase input | |
 |
16 A | Fuse rating (slow blow) | |
 |
4,0 KVA 30% 3,3 KVA 60% 3,0 KVA 100% |
Input power | |
 |
10A ÷ 130A | Current adjustment range | |
 |
130A 30%
110A 60% 100A 100% |
Duty Cycle (10 min.40°C) According to IEC 60974.1 |
|
 |
Ø 1,5 ÷ 3,2 | Electrodes that can be used | |
 |
IP 23 S | Protection class | |
 |
4,5 Kg | Weight | |
 |
160x302x292H | Dimensions mm | |
Art. 256
Art. 1281.04
Art. 1567.01
| Art. | Description |
|---|---|
| 256 | MMA and TIG inverter type D.C. welding power source. Cebora lift ignition Antishock plastic housing with shoulder strap.Comes without torch and welding cables. Complies with EN 61000-3-12. |
| 1281.04 | Accessories set for electrode welding: electrode holder (5 m. -16mm2), work return lead (3 m – 16 mm2), mask with glasses, chipping hammer and steel brush. |
| 1567.01 | “CEBORA T 150” torch 4 m. length. |
KI-101LF
AWS Standard = E6019, JIS Standard = E4301, KS Standard = E4301
Covered Welding Electrodes = Illmenite type
Application:
Welding of high pressure boilers, machinery for generating electric power plant, ship hulls, roling stocks, buildings, bridges and other structual fabrications.
KT-303
AWS Standard = – , JIS Standard = E4303, KS Standard = D4303
Covered Welding Electrodes = Lime titania type
Application:
Welding of cars, other vehicles, agicultural machinery, light structural steels and pedestrian bridges.
KCL-10
AWS Standard = E6010 , JIS Standard = D4311, KS Standard = E4311
Covered Welding Electrodes = High cellulose type
Application:
Shipbuildings,pressure pipe, tanks wih plain or galvanized surfaces and steel casting repairs.
KCL-11
AWS Standard = E6011 , JIS Standard = D4311, KS Standard = E4311
Covered Welding Electrodes = High cellulose type
Application:
Welding of steel sheets, pipes in building and shipbuilding.
K-6012
AWS Standard = E6012 , JIS Standard = D4313, KS Standard = E4313
Covered Welding Electrodes = High titania type
Application:
Welding of shells of railway cars, light vehicles and other steel structures and general light structural steels.
KR-3000
AWS Standard = E6013 , JIS Standard = D4313, KS Standard = E4313
Covered Welding Electrodes = High titania type
Application:
Welding of all kinds of light constructional work in all positions,including pipe-welding.
KR-3000V
AWS Standard = E6013 , JIS Standard = D4313, KS Standard = E4313
Covered Welding Electrodes = High titania type
Application:
Welding of shells of railway vehicles, cars, light vehicles and other steel sheet structures and general light structural steels.
KH-500LF
AWS Standard = E7016 , JIS Standard = D4316, KS Standard = E4316
Covered Welding Electrodes = Low hydrogen type
Application:
Welding of strength members of ship hulls and general heavy structural steels, free cutting steels, medium carbon steel, high sulphur steel. Underlaying of hardfacing.
KH-500VLF
AWS Standard = E7048 , JIS Standard = D4316, KS Standard = E4316
Covered Welding Electrodes = Low hydrogen type
Application:
Vertical-down welding of generral structures and strength members of ship construction, machinery, pressure vessels, buildings and bridges.
KH-500W
AWS Standard = E7016, JIS Standard = D4316, KS Standard = E4316
Covered Welding Electrodes = Low hydrogen type
Application:
One-side welding of pipes and generral butt join of ships, pressure vessels.
KH-500T
AWS Standard = E7016, JIS Standard = D4316, KS Standard = E4316
Covered Welding Electrodes = Low hydrogen type
Application:
Tack welding of steels of ships, buildings and bidges.
K-6022
AWS Standard = E6022, JIS Standard = – , KS Standard = –
Covered Welding Electrodes = High iron oxide type
Application:
Flat and horizontal fillet welding of sheet metal.
KF-300LF
AWS Standard = E6027, JIS Standard = D4327 , KS Standard = E4327
Covered Welding Electrodes = High iron oxide, iron powder type
Application:
Flat and horizontal fillet welding of ship hull constructions, bridges, structural steels for buildings and general structures.
CUTTING ROD
AWS Standard = – , JIS Standard = – , KS Standard = –
Covered Welding Electrodes = Special type
Application:
Cutting of carbon steels, cast irons, stainless steels and nonferrous alloys, etc.
GOUGING ROD
AWS Standard = – , JIS Standard = – , KS Standard = –
Covered Welding Electrodes = Special type
Application:
Gougning of carbon steels, cast irons, stainless steels and nonferrous alloys, etc.
KISWEL WELDING ELECTRODES – MIG & TIG ROD
T-80SB2
AWS Standard = ER80S-B2, JIS Standard = YGT1CM, KS Standard = YGT1CM
Application:
1.25%Cr-0.5%Mo Heat Resistant steels.
T-90SB3
AWS Standard = ER90S-B3, JIS Standard = YGT2CM, KS Standard = YGT2CM
Application:
2.25%Cr-1%Mo Heat Resistant steels.
T-308H
AWS Standard = ER308H, JIS Standard = -, KS Standard = –
Application:
Welding of high carbon 18%Cr-8%Ni stainless steels (AISI 304H) It provides better weldability together with excellent corrosion resistance.
AWS Standard = ER2209, JIS Standard = – , KS Standard = –
Application:
Welding of 22%Cr-95%Ni-3%Mo(UNS S31803,s32900) steels.
T-308
AWS Standard = ER308, JIS Standard = Y308 , KS Standard = Y308
Application:
Welding of low carbon 18%Cr-8%Ni steels such as AISI Types 304L and 308L.
T-308L
AWS Standard = ER308L, JIS Standard = Y308L , KS Standard = Y308L
Application:
Welding of low carbon 18%Cr-8%Ni steels.
T-308LSi
AWS Standard = ER308LSi, JIS Standard = Y308LSi , KS Standard = Y308LSi
Application:
Welding of base metals of similar alloys in wrought or cast forms. Improves the usability of the filler metal.
T-309
AWS Standard = ER309, JIS Standard = Y309 , KS Standard = Y309
Application:
Welding of similar alloys in wrought or cast forms. Joining Type 304 to carbon steel, welding the clad side of Type 304 clad steels.
T-309L
AWS Standard = ER309L, JIS Standard = Y309L , KS Standard = Y309L
Application:
Welding of similar alloys in wrought or cast forms. Joining. Type 304 to carbon steel, welding the clad side of Type 304 clad steels.
T-309LSi
AWS Standard = ER309LSi, JIS Standard = Y309LSi , KS Standard = Y309LSi
Application:
Welding of similar alloys in wrought or cast forms. Joining Type 304 to carbon steel, welding the clad side of Type 304 clad steels.
T-310
AWS Standard = ER310, JIS Standard = Y310 , KS Standard = Y310
Application:
Welding of similar composition alloys.
T-312
AWS Standard = ER312, JIS Standard = Y312 , KS Standard = Y312
Application:
Welding of difficult-to-weld steel and similar composition alloy.
T-316
AWS Standard = ER316, JIS Standard = Y316 , KS Standard = Y316
Application:
Welding of 18%Cr-12%Ni-Mo steels(AISI Type 316)
T-316L
AWS Standard = ER316L, JIS Standard = Y316L , KS Standard = Y316L
Application:
Welding of 18%Cr-12%Ni-Mo steels where the corrosion resistant qualities are required.
T-316LSi
AWS Standard = ER316LSi, JIS Standard = Y316LSi , KS Standard = Y316LSi
Application:
Improves the usability of the filler matal. Welding of low carbon 18%Cr-12%Ni-Mo steels.
T-317L
AWS Standard = ER317L, JIS Standard = Y317L , KS Standard = Y317L
Application:
Welding of low carbon 18%Cr – 12%Ni-3.5%Mo steels (AISI Type317L)
T-347
AWS Standard = ER347, JIS Standard = Y347 , KS Standard = Y347
Application:
Welding of 18%Cr – 9%Ni-Cb steels(AISI Type347), 18%Cr-9%Ni-Ti steels (AISI Type321)
T-410
AWS Standard = ER410, JIS Standard = Y410 , KS Standard = Y410
Application:
Welding of 13%Cr steel (AISI Type403,410)
T-420
AWS Standard = ER420, JIS Standard = – , KS Standard = –
Application:
Welding of martensite stainless alloys of the 13%Cr types (STS 420) The alloy is suitable for the first layer of corrosion resistant weld claddings.
T-430
AWS Standard = ER430, JIS Standard = Y430 , KS Standard = Y430
Application:
Welding of 17%Cr steel and cald side type 403,405 clad steel. Welding of dissimilar steels, such as Cr-stainless steel to carbon steel.
AWS Standard = ER70S-G, JIS Standard = YGT50, KS Standard = YGT50
Application:
This rod uses TIG welding on all grades of carborn steel. It is generally used in root pass welding of pipes in all positions.
T-53
AWS Standard = ER70S-3, JIS Standard = YGT50, KS Standard = YGT50
Application:
This rod uses TIG welding on all grades of carbon steel. It is generally used in root pass and to support the welding when back pass is impossible.
T-70S2
AWS Standard = ER70S-2, JIS Standard = YGT50, KS Standard = YGT50
Application:
This rod uses TIG welding on all grades of carbon steels. Pipes, offshore drilling rigs, structural steel works, etc.
AWS Standard = ER2209, JIS Standard = – , KS Standard = –
Application:
Welding of 22%Cr-95%Ni-3%Mo (UNS S31803,S32900) steels.
KIS-M307Si (Not include in PDF file)
AWS Standard = DINX 15CrNiMn 18 8, JIS Standard = – , KS Standard = –
Application:
Welding of dissmilar steel such as austenitic manganese sgteel to carbon steel forgings.
M-308
AWS Standard = ER308, JIS Standard = Y308 , KS Standard = Y308
Application:
Welding of 18%Cr – 8%Ni steels such as AISI Types 301,302,304,305 and 308.
M-308H
AWS Standard = ER308H, JIS Standard = – , KS Standard = Y308LSi
Application:
Welding of high carbon 18%Cr-8%Ni steels such as AISI Types 304H.
M-308L
AWS Standard = ER308L, JIS Standard = Y308L , KS Standard = Y309
Application:
Welding of low carbon 18%Cr – 8%Ni steels such as AISI Types 304L and 308L.
M-308LSi
AWS Standard = ER308LSi, JIS Standard = Y308LSi , KS Standard = Y309L
Application:
Improves the usability of the fille metal, welding of low carbon 18%Cr – 8%Ni steels.
M-309
AWS Standard = ER309, JIS Standard = Y309 , KS Standard = Y309LSi
Application:
Welding of similar alloys in wrought or cast forms. Welding of dissimilar steels, such as Type 304 to carbon steel or low alloy steels.
M-309L
AWS Standard = ER309L, JIS Standard = Y309L , KS Standard = Y310
Application:
Welding of similar alloys in wrought or cast forms and the clad side of Type 304 clad steels. Joining Type 304 to carbon steel.
M-309LSi
AWS Standard = ER309LSi, JIS Standard = Y309LSi , KS Standard = Y312
Application:
Welding of similar alloys in wrought or cast forms and the clad side of Type 304 clad steels. Joining Type 304 to carbon steel.
M-310
AWS Standard = ER310, JIS Standard = Y310 , KS Standard = Y316
Application:
Welding of base metals of similar composition.
M-312
AWS Standard = ER312, JIS Standard = Y312 , KS Standard = Y316L
Application:
Welding of cast alloys of similar composition. Welding of dissimilar metals such as carbon steel to stainless steel.
M-316
AWS Standard = ER316, JIS Standard = Y316 , KS Standard = Y316LSi
Application:
Welding of 18%Cr – 12%Ni – Mo steels(AISI Type 316)
M-316L
AWS Standard = ER316L, JIS Standard = Y316L , KS Standard = Y317L
Application:
Welding of 18%Cr – 12%Ni-Mo steels where the corrosion resistant qualities are required.
M-316LSi
AWS Standard = ER316LSi, JIS Standard = Y316LSi , KS Standard = Y347
Application:
Improves the usability of the filler metal. Welding of low carbon 18%Cr-12%Ni-Mo steels.
M-317L
AWS Standard = ER317L, JIS Standard = Y317L , KS Standard = Y410
Application:
Welding of base metals of similar composition.
M-347
AWS Standard = ER347, JIS Standard = Y347 , KS Standard = –
Application:
Welding of 18%Cr – 9%Ni-Nb steels(AISI Type347), 18%Cr-9%Ni-Ti steels (AISI Type321).
M-410
AWS Standard = ER410, JIS Standard = Y410 , KS Standard = Y410
Application:
Welding of 13%Cr steel (AISI Type 403,410).
M-420
AWS Standard = ER420, JIS Standard = – , KS Standard = –
Application:
Surfacing in requiring corrosion resistance.
M-430
AWS Standard = ER430, JIS Standard = Y430 , KS Standard = Y430
Application:
Welding of 17%Cr steel and clad side type 403,405 clad steel. Welding of dissimilar steels, such as Cr-stainless steel to carbon steel.
M-430Mo
AWS Standard = – , JIS Standard = – , KS Standard = –
Application:
Surfacing in requiring corrosion resistance.
M-430Ti
AWS Standard = – , JIS Standard = – , KS Standard = –
Application:
Welding of 17%Cr steel and clad side type 403,405 clad steel.
M-309LMo
AWS Standard = ER309LMo , JIS Standard = – , KS Standard = –
Application:
Suitable for dissimilar metal joint and under laying on ferritic steels for overlaying stainless steel weld metals.
M-430LNb
AWS Standard = – , JIS Standard = – , KS Standard = –
Application:
Welding of ferrite stainless alloys of the 17%Cr-Nb types (STS 429, 444)
M-409Cb
AWS Standard = ER347 , JIS Standard = Y347 , KS Standard = –
Application:
Welding of stainless alloys of the 18%Cr-9%Ni-Nb(Ti) types (STS 321, 347)
SPESIFICATION:
| General | Arcair Gouging Carbons as used for the efficient gouging, back gouging, plate edge preparation, touching up and removal of old or defective HardFacing and stainless steel weld deposits. | ||
| Applications | Used in many industries such as agriculture, automotive, heavy fabrication, construction, foundries, maintenance and repair shops, mining and quarrying, military, shipyards, power plants, railroads, | ||
| Process | (MMAW) | ||
| Size | as per request | ||
| Pack Type | Packet | ||
| Pack Weight | 50 Rods = 1 Packet |
TRAFIMET TIG TORCH AIR COOLED SINTIG 17
SINTIG 17 = Single trigger
DUALTIG 17 = Double trigger
FRANTIG 17 = Long trigger
17 V = Torch with valve
FREE 17 = Torch without switch
SINTIG 17 Flex = Torch with flexible torch body
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
TRAFIMET TIG TORCH AIR COOLED SINTIG 17
SINTIG 17 = Single trigger
DUALTIG 17 = Double trigger
FRANTIG 17 = Long trigger
17 V = Torch with valve
FREE 17 = Torch without switch
SINTIG 17 Flex = Torch with flexible torch body
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DAEKWANG FLASHBACK ARRESTOR DK-701
