BAX-LOK INSTRUMENT FITTINGS - SURABAYA TEKNIK - SURABAYA TEKNIK
  • Kontak Kami
  • Hotline : (031) 9968-4085
  • WA : 0811323331
  • BBM : sub-tek

Kontak Kami

Selamat berbelanja, Shopper!

Buka jam 09.00 s/d jam 17.00 | Minggu & Hari Besar - Libur
"SURABAYA TEKNIK" PINDAH ALAMAT KE WISMA TROPODO JL. MUSI FU-07, Lantai 2, WARU - SIDOARJO HARGA & STOCK yang tercantum tidak selalu uptodate, mohon hubungi CS: (031) 9968-4085 atau kirim RFQ anda by email ke subteknik@gmail.com Harga dapat berubah sewaktu-waktu tanpa pemberitahuan terlebih dahulu.
Beranda » INSTRUMENT VALVES & FITTINGS » BAX-LOK » BAX-LOK INSTRUMENT FITTINGS

BAX-LOK INSTRUMENT FITTINGS

SURABAYA TEKNIK / Kategori: ,
Kode : -
Berat : 300 gram
Stok : Ready Stock
Dilihat : 93 kali
Review : Belum ada review
INFO HARGA
Silahkan menghubungi kontak kami untuk mendapatkan informasi harga produk ini.


Bagikan informasi tentang BAX-LOK INSTRUMENT FITTINGS kepada teman atau kerabat Anda.



Link Banner


Deskripsi BAX-LOK INSTRUMENT FITTINGS

 

BAX-LOK DOUBLE FERRULE INSTRUMENT FITTINGS

Nomenclature
BAX-LOK fitting part numbers are constructed from symbols that identify the size and the material used.

Imperial tube

4

MC

8

N

M

Tube O.D.

Style

Thread Size

Thread Type

Material

1/4″

Male Connector

1/2 “

NPT

MONEL & Grade

Therefore, the part no. will be 4MC8N-M400

Metric tube

12M

FC

1/4

N

SS

Tube O.D.

Style

Thread Size

Thread Type

Material

12mm

Female Connector

1/4″

NPT

SS & Grade

Therefore, the part no. will be 12MFC1/4N-SS316

Optional Feature: BAXCELL offers Tube Fittings with CASE HARDENED ferrules for which the process is outsourced from a multinational who are world leaders in providing thermal processing services having 170 locations in 27 countries worldwide employing the latest technology & with years of expertise in this field.

For fittings with CASE HARDENED ferrules, please add CH after above part no.

How to Order

BAX-LOK tube fittings are ordered by part number as listed in this catalogue.

Size:
Imperial tube and pipe thread sizes are designated by the number of sixteenths of an inch.
Eg. ½” tube = 8/16=8,1/4″ NPT =4/16=4.
Metric tube is designated in millimeters and prefixed “M”.
Eg. 12mm tube = 12M. The thread size is written as a fraction Eg. ¼ NPT = ¼N.

Fitting style

A letter or combination of letters and numbers are used to designate the type of fitting. Eg. MRT = male run tee. Please see visual index.

Thread type

N= NPT
ANSI B1.20.1

B= BSP Taper

BS21,  ISO7/1

BP= BSPP

BS2779, ISO 228/1+2, DIN 3852 FORM A

BP= BSPP

BS2779, ISO 228/1+2, DIN 3852 FORM B

M= METRIC

BS3643, ISO 261, 262

Materials

.SS-316

 Titanium-T

 Steel-S

 Alloy Steel-AS

 Brass-B

 Incoloy-I

 MONEL-M

 Incolonel-IN

 Hastelloy C-HC

 Aluminum-A

Please mention material & grade after fitting part no.


For additional Feature i.e  CASE HARDENED ferrules please add CH after above part no :

BAX-LOK tube fittings can be supplied in almost any material suitable for machining.
Principles

The BAX-LOK twin ferrule fitting consists of four precision engineered parts designed to provide secure leak- proof joints capable of satisfying high pressure, vacuum and vibration applications.

Fittings are supplied complete and ready for use. The front ferrule swages onto the tube as it moves down the cone of the body creating a pressure/vacuum-tight seal on both tube and body by the interface pressure and surface finish of mating components. The back ferrule then deforms inwards in the cone of the front ferrule, forming into the tube and creating a strong mechanical hold on the tube.

The internal diameter of the body and nut are closely controlled diameters which constrain the tube within a close tolerance of its axis ensuring accurate alignment within the assembled fittings

Quality Assurance
Product Specification
Application

Manufacturing and ordering processes are tightly controlled by a quality assurance program as per BS 4368 Part IV by carrying out inspection/testing activities at 3 stages as per QAP

The BAX-LOK fittings are widely used in Onshore, Offshore, Chemical, Petrochemical and other Process industries. The fittings comply with ASTM / BS / IS specifications
The BAX-LOK fitting has been specifically designed for use on instrumentation, process and control systems, together with equipment employed in Chemical, Chromatography, Petroleum, Power Generation and Pulp & Paper plants. BAX-LOK tube fitting have also been used in some of the most severe and demanding applications.
Materials

BAX-LOK fittings are available in 316 Stainless Steel, Brass, Steel, Aluminum, Monel, Hastelloy C, Incoloy 825, Inconnel 600 and Titanium. Straight fittings are machined from cold finished bar stock and shaped bodies are machined from close grain forgings. The raw materials used fully conform to the chemical requirements of one or more of the specifications listed below.

Typical raw material specifications:

Material
Bar
Forging

Stainless steel

BS 970 316-S 31
DIN 4401
ASME SA 479/276-316
BS 970 316-S 31
DIN 4401
ASME SA 182-316

Brass

B S 2874 C Z 121
ASTM B16 ALLOY 360
IS 319 Grade-I & II
BS 2872 C Z 122
ASTM B124 ALLOY 377
IS 6192
Steel
ASTM A 108
ASTM A 576
Aluminum
ASTM B 211
ASTM B 211
MONEL
BS 3076 NA 13
ASTM B 164
BS 3076 NA 13
ASTM B 164
Hastelloy C276
ASTM B 575
ASTM B 574

Incoloy 825

BS 3076 NA16
ASTM B 425

BS 3076 NA16
ASTM B 425

Inconnel 600
ASTM B 166
ASTM B 564
Features
Torque

No distortion

Sealing

BAX-LOK tube fittings do not twist the tube during installation. The BAX-LOK fitting design ensures that all make and remake loading is transmitted axially to the tube.  Fitting make-up is eased due to a silver plating of the tube nut threads, which acts as an effective lubricant and prevents galling.

In make-up, there is no undue force in an outward direction to distort the fitting body or ferrules to cause interference between the ferrules and the nut. This assures that the nut will back off for disassembly and permits a greater number of end remarks.
Positive, reliable connections with BAX-LOK fittings have been qualified with exhaustive tests and over years of experience in the manufacture of quality tube fittings. Specific product features such as burnished cones for superior sealing and exacting manufacturing tolerances for consistent product quality, all contribute to the effective sealing of the fittings. In tests, after repeated remakes BAX-LOK fittings effected a Helium seal at over 200 bar. Vibration and impulse tests in the multi-million cycle range prove outstanding sealing capability and fatigue resistance.


HOW TO IDENTIFY METRIC FITTINGS

Metric tube fittings are identified by a stepped shoulder on both the body and the threaded end of the nut as illustrated.

Selection

The BAX-LOK twin ferrule tube fitting is precision engineered to exacting standards. Careful selection of high quality tubing together with the appropriate BAX-LOK fitting will ensure the installation of safe, leak free systems. The following tables are intended as a guide to tube ordering. The tube sizes listed are regularly tested to bursting pressure in both maximum and minimum wall thickness using correctly assembled BAX-LOK tube fittings, with no sign of leakage or failure at the connections.  For use with tubes of wall thickness other than those listed, recommendations regarding working pressures for BAX-LOK fittings can be obtained from our Technical Dept.

Tube should be fully annealed high quality stainless steel tubing to ASTM A-269 or equivalent. The preferred hardness is Rb 80 or less, if harder tube is used Rb 90 is the maximum allowed under ASTM A-269.

Recommended maximum working pressures for stainless steel tubes in bar

Metric

Outside Diameter
of tube (mm)

Tube wall thickness (mm)

0.5 0.7 1.0 1.5 2.0 2.5 3.0

3
4
6
8
10
12
16
18
20
25

450
275
205
170
130
105
660
480
310
225
180
150

 

685
515
410
310
245
160
140
 

725
530
490
375
245
230
195
170

 

480
350
335
290
230

380
335
265

325


Imperial

Outside Diameter
of tube (inch)

Tube wall thickness (Swg/inch)

33/.010

30/.012

22/.028

22/.036

18/.048

16/.064

14/.080

12/.104

1/16
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1

385

465

680
345
265
205
170

865
515
315
275
205
155
120
105
85

600
465
380
275
205
170
140
120

805
635
515
380
275
240
195
170

480
380
310
245
225

450
380
300
240

The working pressures in the above tables are based on actual tests on ASTM 269 tubing with a safety factor of 4:1. They apply to a metal temperature range of –20o to +100o C.

Threads


NPT Threads

The National Pipe Taper thread has a thread angle of 60o, and is mainly used in the petrochemical and process industries.

NPT – National Pipe Taper threads for connections where pressure–tight joints are made on the threads utilizing a thread sealant.

Thread Standard

ANSI/ASME B. 20.1-1983

BSPP
BSPT
Threads
per
d1 Nominal
Min
d4 Max.
a1
S1
S2 Min.
b1 Min.
b2
   
inch
inch mm inch mm inch mm Inch Mm Inch Mm inch Mm inch mm inch Mm

1/8
¼
3/8
½
¾
1
1.1/4
1.1/2

1/8
¼
3/8
½
¾
1
1.1/4
1.1/2

28
19
19
14
14
11
11
11

0.383
0.518
0.656
0.825
1.041
1.309
1.650
1.882

9,73
13,16
16,66
20,95
26,44
33,25
41,91
47,80

0.156
0.237
0.250
0.322
0.375
0.409
0.500
0.500

3,97
6,05
6,35
8,16
9,2
10,39
12,7
12,7

0.591
0.748
0.906
1.063
1.299
1.575
1.969
2.205

15
19
23
27
33
40
50
56

0.39
0.059
0.079
0.098
0.098
0.098
0.098
0.098

1
1,5
2
2,5
2,5
2,5
2,5
2,5

0.375
0.562
0.562
0.750
0.750
0.937
1.0
1.0

9,53
14,28
14,28
19,05
19,05
23,80
2,4
25,4

0.281
0.437
0.437
0.562
0.625
0.718
0.781
0.875

7,14
9,40
9,40
14,28
15,88
18,24
19,84
22,23

0.315
0.472
0.437
0.551
0.630
0.709
0.787
0.866

8
12
12
14
16
18
20
22

0.217
0.335
0.335
0.413
0.512

5,5
8,5
8,5
10,5
13

Thread Size

Thread Per

E1

I1 Nominal

I3 Nominal

I4

 Inch

Inch

inch

mm

inch

mm

Threads

inch

Mm

inch

mm

1/8
¼
3/8
½
¾
1
1.1/4
1.1/2

27
18
18
14
14
11.1/2
11.1/2
11.1/2

0.376
0.492
0.627
0.778
0.989
1.239
1.593
1.822

9,50
12,50
15,93
19,77
25,12
31,46
40,22
46,29

0.161
0.228
0.240
0.320
0.339
0.400
0.420
0.420

4,10
5,79
6,10
8,13
8,61
10,16
10,67
10,67

3
3
3
3
3
3
3
3

0.111
0.167
0.167
0.214
0.214
0.261
0.261
0.261

2,82
4,23
4,23
5,44
5,44
6,63
6,63
6,63

0.392
0.595
0.601
0.782
0.793
0.985
1.009
1.025

9,97
15,10
15,26
19,86
20,15
25,01
25,62
26,04


BSP threads

BSPP and BSP Taper threads have a thread angle of 55o.
The spot face surface must be square to the pitch diameter and free from longitudinal and spiral tool marks.

BSPP – British Standard Pipe Parallel threads are used in tubes and fittings where pressure-tight joints are not made on the thread, i.e. a peripheral seal is used.

BSP Taper – British Standard Pipe Taper threads are used in tubes and fittings where pressure-tight joints are made on the threads.

Thread Standards:
BSPP thread to: ISO 228-1, BS2779, DIN 3852 part 2,
BSP Taper thread to: ISO 7/1, BS21


 

 

 

 

 

Sealing


Interference sealing of taper threads

Pressure-tight joints of screwed connections with taper threads are achieved by the application of a sealant to the surface of the external male thread.
A minimum of five layers of PTFE tape should be wound around the external taper thread prior to the assembly.
Starting with the first thread, wrap the tape in the direction of the thread spiral.
Ensure that the PTFE tape does not overhang the first thread. PTFE tape should be to the BS4375 specification

Sealing compounds and liquid sealants.

Apart from polymer joint compounds and air-drying liquid sealants, the most common thread seal is an anaerobic synthetic resin, which cures in the absence of air.

Connections are normally ready for operation following one hour curing time, complete curing may take up to 24 hours.

Peripheral sealing of parallel threads

Pressure-tight joints of screwed connections with parallel threads are achieved by placing a seal between the two-machined faces.

Flat seal

Washers and rings are manufactured in many different materials including fully annealed 316 stainless steel, copper, aluminum, fiber, and plastics.

The tightening torque at assembly will vary according to the tensile strength of the fitting material, and the elasticity of the peripheral seal. The torque should be carefully selected to avoid compressing soft seals to the point of extrusion.

Bonded seals

Elastomer sealing rings bonded into metal washers. Bonded seals are reusable, and cater for a variation in the quality of the machined surfaces.

Installation

Interference sealing of taper threads

BAX-LOK tube fittings are supplied completely assembled.

Normal uses

1-Ensure that the end of the tube is cut square and any burrs removed without causing undue chamfering of the tube end.
2-Insert the tube into the BAX –LOK fitting ensuring that the tube is firmly butted home into the body of the fitting and the nut is finger tight.
3-With the body firmly held, mark the nut in the finger tightened position, and rotate the nut one and a quarter turns from the marked position (fig.1). The correctly made connection is then completed.
4-For sizes up to 3/16” tube fittings, only three quarters of a turn from finger tight is necessary.

High pressure applications, high safety factor systems

To allow for possible tolerance variations in tube diameters when the application demands the maximum pressure sealing capabilities of the fitting, it is recommended that the nut is tightened until the tube cannot be rotated by hand. From this point the nut should be tightened one and a quarter turns.

Re-tightening and dis-assembly
With BAX -LOK tube fittings the connection can be disconnected and retightened many times and the same reliable, safe, leak proof connection obtained.

Pre Assembly

For applications where lack of space precludes normal assembly a set of hardened pre-assembly tools is available to enable the nut and ferrules to be pre-assembled onto the tube. With the assembly tool secured in a vice, insert the tube and assemble (fig. 4) as per installation instructions.

Break the pre-assembled joint and insert this assembly into the fitting body (fig 5). Re-assemble as stated in the re-tightening instructions

 

 

 

Similar Posts:

Customer review dinonaktifkan: BAX-LOK INSTRUMENT FITTINGS

Maaf, form customer review dinonaktifkan untuk produk ini

Produk Terkait BAX-LOK INSTRUMENT FITTINGS

*Harga Hubungi CS
Ready Stock

Mungkin Anda tertarik dengan produk terbaru kami

SIDEBAR