Selamat berbelanja JURAGAN
Bagikan informasi tentang JUAL OLIVER 2 VALVE MANIFOLD G12 1/2″FNPT x 3/4″ MNPT kepada teman atau kerabat Anda.
OLIVER 2 WAY VALVE MANIFOLD, TYPE G12MFS/75-IN
The ‘G12’ Type 2 valve manifold is designed for remote mounting to static pressure transmitters. The separate vent valve gives full control of venting of the instrument, plus the ability to calibrate in-situ. Each needle valve head is designed for safe and reliable isolation, giving bubble tight shut off, with non-rotating & anti-galling tip and dynamic self-adjusting spindle seal to give long service life in a variety of service conditions.
NAME: Oliver 2 Valve Manifold (Block & Bleed)
G12MF – Male x Female
SIZE: 3/4″ MALE NPT x 1/2″ FEMALE NPT
· Non rotating tip – self centering & anti-galling
· Piston ring – gives dynamic adjustment of gland seal in response to pressure change
· Anti-blow out spindle – a major safety feature
· Secure seal – precision machined to give leak free operation for the life of the valve.
Available in either PTFE or graphite foil.
In addition to the standard isolation needle valve, Oliver Valves can provide small manifolds specifically for gauge isolation.
The gauge valve comes in many configurations, ranging from single isolate valves with a bleed port, to block and bleed valves with varying end configurations. Our gauge valves, as standard, are rated to 413bar (6,000psi), but can be rated at 689bar (10,000psi) and are available in a range of different materials.
We offer a variety of different Gauge valves, including:
Our Two Valve Manifolds with female x female connections are suitable for wall mounting and bottom venting. The valves will operate up to 6,000 psi. Different materials and a variety of options are available to suit your requirements.
Our Gauge Bleed Valves have a 1/4″ UNF bleed outlet. The valves will operate up to 6,000 psi and bleed screws are supplied as standard.
Our Gauge Multiport Valves are supplied with one male inlet and three female outlets. The valves will operate up to 6,000 psi and inlet lagging extensions are available.
Our Gauge Vent Valves have a 1/4″ UNF bleed outlet. The valves will operate up to 6,000 psi and bleed screws are supplied as standard.
|Gauge Valve Specifications:|
|PSI Rating||6,000 PSI Standard – Up to 10,000 PSI (depending on model/type)|
|End Configurations||Single isolate valves with a bleed port, to Block and Bleed|
|Tips||Non rotating tip – self centering & anti-galling|
|Ring||Piston ring – gives dynamic adjustment of gland seal in response to pressure change|
|Spindle||Anti-blow out spindle – a major safety feature|
|Seal||Precision machined Secure Seal – available in either PTFE or graphite foil|
|REMOTE MOUNTING 2 VALVE MANIFOLD; MANIFOLD TYPE:G12MF MATERIAL:316 STAINLESS STEEL STANDARD VALVE SIZE: 1/2″ RATING:6,000 PSI IN PORT NPT: 1/2″ MALE OUT PORT NPT: 1/2″ FEMALE VENT NPT: 1/4″ FEMALE NA: NACE MR-01-75
Buka jam 09.00 s/d jam 17.00 | Minggu & Hari Besar - Libur