JUAL OLIVER 2 VALVE MANIFOLD G12 1/2"FNPT x 3/4" MNPT - SURABAYA TEKNIK - SURABAYA TEKNIK
  • Kontak Kami
  • Hotline : (031) 9968-4085
  • WA : 0811323331
  • BBM : sub-tek

Kontak Kami

Selamat berbelanja, Shopper!

Buka jam 09.00 s/d jam 17.00 | Minggu & Hari Besar - Libur
"SURABAYA TEKNIK" PINDAH ALAMAT KE WISMA TROPODO JL. MUSI FU-07, Lantai 2, WARU - SIDOARJO HARGA & STOCK yang tercantum tidak selalu uptodate, mohon hubungi CS: (031) 9968-4085 atau kirim RFQ anda by email ke subteknik@gmail.com Harga dapat berubah sewaktu-waktu tanpa pemberitahuan terlebih dahulu.
Beranda » INSTRUMENT VALVES & FITTINGS » JUAL OLIVER 2 VALVE MANIFOLD G12 1/2″FNPT x 3/4″ MNPT

JUAL OLIVER 2 VALVE MANIFOLD G12 1/2″FNPT x 3/4″ MNPT

SURABAYA TEKNIK / Kategori: ,
Kode : G12MFS/75-IN
Berat : 1000 gram
Stok : Ready Stock
Dilihat : 231 kali
Review : Belum ada review
Rp 2.660.000
Cara Pemesanan How to Order?
Pesan melalui SMS? Klik SMS
Bayar di tempat? Klik COD


Bagikan informasi tentang JUAL OLIVER 2 VALVE MANIFOLD G12 1/2″FNPT x 3/4″ MNPT kepada teman atau kerabat Anda.



Link Banner


Deskripsi JUAL OLIVER 2 VALVE MANIFOLD G12 1/2″FNPT x 3/4″ MNPT

OLIVER 2 WAY VALVE MANIFOLD, TYPE G12MFS/75-IN

The ‘G12’ Type 2 valve manifold is designed for remote mounting to static pressure transmitters. The separate vent valve gives full control of venting of the instrument, plus the ability to calibrate in-situ. Each needle valve head is designed for safe and reliable isolation, giving bubble tight shut off, with non-rotating & anti-galling tip and dynamic self-adjusting spindle seal to give long service life in a variety of service conditions.

 

 

BRAND :  OliverValves

NAME: Oliver 2 Valve Manifold (Block & Bleed)

TYPE: G12MFS/75-IN

G12MF – Male x Female

SIZE:  3/4″ MALE NPT x 1/2″ FEMALE NPT

 

DESCRIPTION:

· Non rotating tip – self centering & anti-galling
· Piston ring – gives dynamic adjustment of gland seal in response to pressure change
· Anti-blow out spindle – a major safety feature
· Secure seal – precision machined to give leak free operation for the life of the valve.
Available in either PTFE or graphite foil.

 

In addition to the standard isolation needle valve, Oliver Valves can provide small manifolds specifically for gauge isolation.

The gauge valve comes in many configurations, ranging from single isolate valves with a bleed port, to block and bleed valves with varying end configurations. Our gauge valves, as standard, are rated to 413bar (6,000psi), but can be rated at 689bar (10,000psi) and are available in a range of different materials.

We offer a variety of different Gauge valves, including:

  • Two Valve Manifolds
  • Gauge Bleed Needle Valves
  • Gauge Vent Valves
  • Gauge Multiport Valves

Our Two Valve Manifolds with female x female connections are suitable for wall mounting and bottom venting. The valves will operate up to 6,000 psi. Different materials and a variety of options are available to suit your requirements.

Our Gauge Bleed Valves have a 1/4″ UNF bleed outlet. The valves will operate up to 6,000 psi and bleed screws are supplied as standard.

Our Gauge Multiport Valves are supplied with one male inlet and three female outlets. The valves will operate up to 6,000 psi and inlet lagging extensions are available.

Our Gauge Vent Valves have a 1/4″ UNF bleed outlet. The valves will operate up to 6,000 psi and bleed screws are supplied as standard.

 

Gauge Valve Specifications:
PSI Rating 6,000 PSI Standard – Up to 10,000 PSI (depending on model/type)
End Configurations Single isolate valves with a bleed port, to Block and Bleed
Tips Non rotating tip – self centering & anti-galling
Ring Piston ring – gives dynamic adjustment of gland seal in response to pressure change
Spindle Anti-blow out spindle – a major safety feature
Seal Precision machined Secure Seal – available in either PTFE or graphite foil

 

REMOTE MOUNTING 2 VALVE MANIFOLD; MANIFOLD TYPE:G12MF MATERIAL:316 STAINLESS STEEL STANDARD VALVE SIZE: 1/2″ RATING:6,000 PSI IN PORT NPT: 1/2″ MALE OUT PORT NPT: 1/2″ FEMALE VENT NPT: 1/4″ FEMALE NA: NACE MR-01-75

Mfr. Part#:G12MFS-LTBNA

Overview
The ‘G12MF’ Type 2 valve manifold is designed for remote mounting to static pressure transmitters. The angled heads allow for panel mounting and the seperate vent valve gives full control of venting of the instrument, plus the ability to calibrate in-situ. Each needle valve is designed for safe and reliable isolation, giving bubble tight shut off, non-rotating & anti-galling tip and dynamic self-adjusting spindle seal to give a long service life in a variety of applications.Standard Specification
Pressure: 6000psi Temp: 240 deg C Show Graph
Packing: PTFE Thread form: NPT Handle: T-Bar
Seat: Metal to Metal Bore: 0.21″ (5.4mm) CV: 0.46
Connections: 1/2″ Inlet/Outlet & 1/4″ NPT VentKey Features
Non rotating tip – self centering & anti-galling
Piston ring – gives dynamic adjustment of gland seal in response to pressure change
Anti-blowout spindle – a major safety feature
Secure seal – precision machined to give a leak free opertion for the life of the valve. Available in either PTFE or GrafoilProcess Valve: Needle
Orifice Size: 0.21”
Maximum Temperature Rating: 464 Deg F
Vent Valve: VP50S
Maximum Pressure Rating: 6000 psi @ 100 Deg F
Packing Material: PTFE
Body Material: 316 Stainless Steel

 

 

 

 

Similar Posts:

Belum ada review untuk JUAL OLIVER 2 VALVE MANIFOLD G12 1/2″FNPT x 3/4″ MNPT

Silahkan tulis review Anda

Your email address will not be published. Required fields are marked *

*







Produk Terkait JUAL OLIVER 2 VALVE MANIFOLD G12 1/2″FNPT x 3/4″ MNPT

*Harga Hubungi CS
Pre Order / FITOK
*Harga Hubungi CS
Ready Stock / 8PH-SS

Mungkin Anda tertarik dengan produk terbaru kami

SIDEBAR