INSTALLATION INSTRUCTION-PORT CONNECTOR
*Remove nut and ferrules from the first of two SUPERLOK ports to be connected.
*Slip nut ( no ferrules) over machined ferrule end of port connector.
*Insert port connector into SUPERLOK port 1 and snug by hand.
Tighten with wrench 1/4 turn only. For 1/8, 3/16 in., 2, 3, and 4mm tube fittings, tighten only 1/8 turn. Subsequent connections are made by tightening slightly with a wrench after snugging the nut by hand.
*Insert other end of port connector into SUPERLOK port 2 and tighten nut 1 1/4 turns from finger-tight.
For 1/16, 1/8, 3/16 in., 2, 3, and 4mm tube fittings, only 3/4 turn from finger-tight is necessary.