KLINGER SIL C-4400

KLINGER SIL C-4400

KLINGER SIL – NON ASBESTOS JOINTING MATERIAL

  • Pressure: 100 kg
  • Temperature: 400° C
  • Size: 1500 X 2000 mm
  • Thickness: 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm

C-4400

Characteristics & Main Applications
Universal high-pressure gasket suitable for use in many branches of the chemical industry, the food industry and the water supply industry. Very high standard of performance. KLINGER®SIL C-4400 is also known as C4400. Resistant to oils, water, steam, gases, salt solutions, fuels, alcohols, organic and inorganic acids, hydrocarbons, lubricants and refrigerants.

Material
Gasket material based on NBR-bound aramide fibres.

C4400

pT Diagram

c4400LG

The Klinger pT diagram provides guidelines for determining the suitability of a particular gasket material for a specific application based on the operating temperature and pressure only. Always refer to the chemical resistance of the gasket to the fluid. &nbsp

1. In area one, the gasket material is normally suitable subject to chemical compatibility.
2. In area two, the gasket materials may be suitable but a technical evaluation is recommended.
3. In area three, do not install the gasket without a technical evaluation. Always refer to the chemical resistance of the gasket to the fluid.

 
Dimensions of the Standard Sheets
Sizes: 1500 x 2000mm Thicknesses: 0,5 mm, 1,0 mm, 1,5 mm, 2,0 mm, 3,0 mm; other thicknesses and sizes on request. Tolerances: thickness ± 10%, length ± 50 mm, width ± 50mm

Function & Durability
The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.

SURABAYA TEKNIK

Website:

Leave a Reply

Your email address will not be published. Required fields are marked *