KLINGER SIL C-4430

KLINGER SIL C-4430

KLINGER SIL  – NON ASBESTOS JOINTING MATERIAL

  • Pressure: 100 kg
  • Temperature: 440° C

 

  • Size: 1500 X 2000 mm
  • Thickness: 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm

c4430

Characteristics & Main Applications
Premium quality, high-pressure gasket with outstanding stress relaxation and outstanding resistance to hot water and steam as to oils and hydrocarbons. KLINGER®SIL C-4430 is also known as C4430.

Material
Optimum combination of synthetic and glass fibres bonded with NBR.

c-4430

pT Diagram

c4430LG

The Klinger pT diagram provides guidelines for determining the suitability of a particular gasket material for a specific application based on the operating temperature and pressure only. Always refer to the chemical resistance of the gasket to the fluid. &nbsp

1. In area one, the gasket material is normally suitable subject to chemical compatibility.
2. In area two, the gasket materials may be suitable but a technical evaluation is recommended.
3. In area three, do not install the gasket without a technical evaluation. Always refer to the chemical resistance of the gasket to the fluid.

 
Dimensions of the Standard Sheets
Sizes: 1000 x 1500 mm, 1500 x 2000mm Thicknesses: 0,5 mm, 1,0 mm, 1,5 mm, 2,0 mm, 3,0 mm; other thicknesses and sizes on request. Tolerances: thickness ± 10%, length ± 50 mm, width ± 50mm

Function & Durability
The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.

 

SURABAYA TEKNIK

Website:

Leave a Reply

Your email address will not be published. Required fields are marked *