KLINGER SIL – NON ASBESTOS JOINTING MATERIAL
- KLINGERsil C8200 is manufactured from a unique blend of fibres with an acid resistant binder.
- Temperature: +150°C continuous, +200°C maximum.
- Max Pressure: 60 bar.
- Synthetic Fiber
- Hypalon® Binder
- Acid Resistant
- Good Oil-Fuel Resistance
- Good Gas Sealability
- No Color Added
Key Features: This material is specifically developed for aggresive chemical environments. It has resistance to most mineral acids, alkalis, ketones, aldehydes, refrigerants, oils, fuels and hydrocarbons. This material also has an anti-stick finish on both sides.
|Sheet Size (mtrs):||2.0 x 1.5|
|Thickness (mm):||0.5, 0.8, 1.0, 1.5, 2.0, 3.0|
Note: Maximum temperature and pressure should not be used at the same time. All values are dependant on application. Please refer to the data sheet below.
Characteristics & Main Applications
Premium gasket material for use with acids. Resistant to a wide variety of agressive chemical environments. KLINGER®SIL C-8200 is also known as C8200.
Specialist grade based on a blend of fibres with an acid resisting binder
The Klinger pT diagram provides guidelines for determining the suitability of a particular gasket material for a specific application based on the operating temperature and pressure only. Always refer to the chemical resistance of the gasket to the fluid.
1. In area one, the gasket material is normally suitable subject to chemical compatibility.
Dimensions of the Standard Sheets
Sizes: 1500 x 2000mm Thicknesses: 0,5 mm, 1,0 mm, 1,5 mm, 2,0 mm, 3,0 mm; other thicknesses and sizes on request. Tolerances: thickness ± 10%, length ± 50 mm, width ± 50mm
Function & Durability
The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufacture’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.