PENUTUP ATAP DINDING YANG KUAT DENGAN ESTETIKA

LYSAGHT SPANDEK® dirancang sebagai bahan penutup atap dan dinding yang kuat, estetik, dan efisien dengan bentuk gelombangnya yang kontemporer untuk bangunan perumahan, industri, dan komersial. LYSAGHT SPANDEK® juga telah dikenal di Indonesia, Australia, dan negara-negara lain sebagai bahan penutup atap perumahan dan bangunan sosial karena kemudahan dalam penggunaan dan penampilannya yang menarik.

MENGAPA LYSAGHT SPANDEK®

– LYSAGHT SPANDEK® dibuat dari baja bertegangan tarik tinggi ZINCALUME® dan Clean COLORBOND® dari BlueScope Steel. Baja ZINCALUME® adalah baja dengan lapisan yang terdiri dari perpaduan antara 43.5% Seng, 55% Alumunium dan 1.5% Silikon sebagai lapis pelindung terhadap korosi yang tinggi. Ketahanan ZINCALUME terhadap korosi empat sampai lima kali dibanding baja galbani lain – Clean COLORBOND® adalah baja berwarna dengan bahan dasar ZINCALUME®. Penggunaan sistem pengecatan dan lapisan primer yang bermutu tinggi pada ZINCALUME® meningkatkan ketahanan terhadap korosi dan menjamin mutu cat – Multi fungsi untuk aplikasi atap maupun dinding

LYSAGHT^® SPANDEK^® OPTIMA^™ steel roofing profile is a symmetrical trapezoidal ribbed roofing and wall cladding profile. It is ideal for designs where a stronger, bolder and modern corrugated appearance is required.

It can be used in buildings that require long spans as it permits wider purlin spacings* and utilizes fewer fasteners. Its rigid trapezoidal rib makes it an excellent choice for for contemporary roof and wall cladding designs.

The cost-effective LYSAGHT^® SPANDEK^® OPTIMA^™ steel roofing profile is multi-faceted and can be used in a variety of ways for both roof and wall in single and double span applications.

The trapezoidal ribs can be installed horizontally or vertically. The continuous running angular outline makes the ribbed and stylized trapezoidal LYSAGHT^® SPANDEK^® OPTIMA^™ profile more appealing. The contrasting effect of light and shadow arising under light creates a distinctive and natural dimensional wave.

* See Table on Minimum Ridge Purlin Spacing for Sprung Ridge LYSAGHT^® SPANDEK^® OPTIMA^™ Profile.

 

Application

• Fascia
• Feature Wall
• Internal Ceiling
• Soffit

Features & Benefits

• Trapezoidal ribs can be run vertically or horizontally
• Aesthetically pleasing – suits contemporary and modern design
• All weather performance
• Excellent wind resistance
• Low cost and easy to install
• Material warranty

Warranty

BlueScope Steel offers a warranty (subject to environmental conditions) for Clean COLORBOND^® steel and ZINCALUME^® steel of up to 20 years from the date of installation against perforation by weathering in the natural elements.

Warnings

Lead and copper are not recommended for use with Clean COLORBOND^® steel or ZINCALUME^® steel as contact with these metals can cause accelerated corrosion. The minimum recommended roof pitch is 1 degree. Direct contact should therefore be avoided. When inside condensation conditions are likely, coated steel girts should be used so that ZINCALUME^® steel coming into contact with bare steel is avoided.

* Total Coated Thickness (TCT) for Clean COLORBOND^® ULTRA steel is 0.48mm (Standard) and 0.54mm (Non-Standard).

**Span is subject to designed live loads and verifications. Maximum Roof Run (in metres) for Roof Slopes and Rainfall Intensities

Minimum Ridge Purlin Spacing for Sprung Ridge LYSAGHT^® SPANDEK^® OPTIMA^™ Profile

Recommended Radius for LYSAGHT^® SPANDEK^® OPTIMA^™ curved applications

For a curve radius greater than the recommended minimum, the purlin spacing must not exceed 2,400mm for LYSAGHT^® SPANDEK^® OPTIMA^™ Profile 0.42mm BMT and 3,000mm for LYSAGHT^® SPANDEK^® OPTIMA^™ Profile 0.48mm BMT.

* Maximum recommended radius to provide sufficient drainage near crest of curvature.

The pressure capacities for serviceability are based on a deflection limit of (span/120) + (maximum fastener pitch/30). The pressure capacities for strength have been determined by testing the cladding to failure (ultimate capacity). These pressures are applicable when the cladding is fixed to a minimum of 1.0mm, G550 steel.

For material less than 1.0mm thick, please contact our technical sales representatives for assistance.

 

 

 

LYSAGHT^® KLIP-LOK^® OPTIMA^™ represents a new generation of high-strength cladding that spans wider and offers better uplift performance than other comparable profiles. Our research has shown that its concealed fixed system and long length make it the ideal profile for controlling thermal expansion and contraction. A patented innovation, the wide-cover LYSAGHT^® KLIP-LOK^® OPTIMA^™ ensures economy as well as ease of installation. It is suitable for both general and coastal environments.

Simple, low-cost, concealed-fixing

With no exposed fasteners, the long, straight lines of LYSAGHT^® KLIP-LOK^® OPTIMA^™ remain clean and smooth. At the heart of our system is the fixing clip, which can be fixed quickly and easily. This is because the LYSAGHT^® KLIP-LOK^® OPTIMA^™ clip is fixed with hex head screws, which are easier to drive. The clip enables roofers to accommodate up to 50mm of insulation.

Transverse fluting

Our patented “AMF – Angled Micro Fluting^®” transverse fluting adds significantly to the performance of this revolutionary product, making it superior to any other concealed-fixed cladding.

Longitudinal fluting is also available from the mobile roll former for long length spring-curved applications.

• LYSAGHT^® KLIP-LOK^® OPTIMA^™ is the new generation of our wide-cover concealed-fixed cladding.
• LYSAGHT^® KLIP-LOK^® OPTIMA^™ is now available in rolled on-site lengths and extra thickness.
• Visually, a bold rib makes a strong statement rising from flat pans which are transverse micro-fluted (a patented innovation)

 

 

PENUTUP ATAP TANPA BAUT DENGAN TAMPILAN MODERN DAN KUAT

LYSAGHT KLIP-LOK® merupakan lembaran profil baja ringan yang memiliki kombinasi kekuatan profil, tahan cuaca dan multifungsi untuk atap maupun dinding. Teknologi profil kuncian dan juga “concealed fastening system” memungkinkan untuk digunakan berbagai aplikasi kelandaian bangunan hingga tampilan secara vertikal dan horizontal.

MENGAPA LYSAGHT KLIP-LOK®

– “Concealed fastening system” – teknologi kunci tersembunyi dibawah lapisan, menghindari potensi kebocoran serta tampilan bersih tanpa sekrup – Material baja lapis ringan terbaik sehingga baik untuk penggunaan bantang panjang dan mengurangi biaya konstruksi dengan efisiensi jumlah tumpuan (gording) – Mampu digunakan untuk penutup atap dengan sudut elevasi rendah (min 2O ) dan tampilan dinding sehinggga memberikan sentuhan modern untuk bangunan rumah – Dengan pilihan warna standard sesuai dengan tren modern

 

LYSAGHT^® KLIP-LOK^® 406 profile is a strong, durable, versatile and long length roofing and walling profile. It is designed to have a locked-action rib for positive concealed clip fixing. Its smart fluted pans, locked-action rib design and concealed fastening allow multiple effective usage on applications such as low-pitched roofs, vertical as well as horizontal ribbed walling.

LYSAGHT^® KLIP-LOK^® 406 profile has an effective cover width of 406mm and a rib height of 41mm. It is roll-formed from genuine High Tensile ZINCALUME^® G550 steel and is available in a range of Clean COLORBOND^® steel proprietary paint systems and colours.

Product Applications

The profile can be used for any roof and wall cladding, fascia and soffit. It is designed to perform at a minimum recommended roof pitch of 2° (1 in 29), vertical and horizontal ribbed walling.

Product Features & Benefits

1. Concealed Fixing

   Fixing clips can effectively secure LYSAGHT^® KLIP-LOK^® 406 steel cladding to steel or timber supports without puncturing the sheet. Fastening screws are not visible because of its positive concealed clip fixing, thereby achieving smooth, clean lines in architectural design.

2. Rain Water Drainage and Waterproof System

   LYSAGHT^® KLIP-LOK^® 406 profile provides a lightweight but extremely strong waterproof cladding system. Its wide fluted pans and high ribbed design disperses rainwater quickly and efficiently to the outer perimeters of the roof. Thus, LYSAGHT^® KLIP-LOK^® 406 steel cladding is an excellent choice for severe rainfall intensity areas in Asia.

3. All Weather Performance

   LYSAGHT^® KLIP-LOK^® 406 steel profile has exceptional strength even though it is light weight. It has excellent wind resistance too. Its first class resistance against corrosion, discolouration and tropical dirt staining, while requiring no or minimal maintenance, makes it the best all-weather performer.

4. Simple & Low-cost Fixing

   Long, straight lengths of LYSAGHT^® KLIP-LOK^® 406 profile can be laid in place and easily aligned. Fixing with our clips is simpler and faster than ever before. The smaller number of clips for a given area provides extra economy. LYSAGHT^® KLIP-LOK^® 406 profile is available in long lengths, therefore in most jobs, you can have one sheet from ridge to gutter without end laps.

5. Proven by Test Results

   The steel profile is tested and proven by NATA registered laboratory at Lysaght Technology Centre and CSIRO (Commonwealth Scientific and Industrial Research Organisation) in Australia.

6. Other Benefits

   • Conforms to International Building Codes and Standards
   • Manufactured under strict processed governed by ISO9001 Quality Management System and ISO14001 Environmental Management System.
   • Genuine material warranty (terms & conditions apply)
   • Genuine Product Certification

 

The LYSAGHT PRESTIGE^® Panel II is an improved versionof its predecessor, a quality product which provides a wider choice of durable and functional wall claddings to building designs in the region.

• Roll formed and available in three Clean COLORBOND^® pre-painted steel systems with a wide range of colours to choose from.
• High-strength design can be used exterior and interior walls, ceilings as well as soffits.
• Panels are factory corrective-leveled during roll – forming to provide the flatest product possible.
• Available perforated for acoustical applications.

Custom-cut lengths are available in countinous length (up to 12000mm)

TYPICAL APPLICATIONS

• Vertical surface cladding
• Walling
• Fascias
• Feature wall, ceiling and fencing

Applications

Roofing & Walling
Finishes available
COLORBOND^®
Standard BMT
0.55 mm

Features

Length +0, -15mm

Cover Width +- 4mm, Rib height +- 0.5mm

• Roll-formed from ZINCALUME® steel
• Available in three Clean COLORBOND® prepainted steel systems with a wide range of colors to choose from
• Choice of three distinctive concealed fastener profiles
• Compatible trim and accessories available
• High-strength design can be used for exterior and interior walls, and soffits
• Panels are factory corrective-leveled during roll-forming to provide the flattest product possible
• Perforated available for acoustical applications

Lengths

Can be custom-cut to your size requirements in continuous lengths (up to 12,000mm)

 

 

 

 

 

 

Advantages of Steel

TRUECORE® steel delivers very real benefits for builders, designers and homeowners alike.

Termite proof

Wall and roof framing made from TRUECORE® steel is 100 per cent termite and borer proof. Because of this, the frames don’t require additional chemical treatments to protect them from pest attack.

TRUECORE® steel is also non-combustible, so its use significantly reduces the amount of flammable material in a home.

The strength of steel

A home with a ‘heart’ of steel is designed to stand the test of time.

The inherent strength and durability of TRUECORE® steel provides structural integrity in all types of environments and conditions – from Australia’s cyclone-prone north to the cold climate regions of the south; in bushland, where fire is an ever present threat, and on the coast.

Backed by a 50 year BlueScope Steel warranty*, TRUECORE® steel provides homeowners with the peace of mind of knowing their most valuable asset is protected by the strength or steel.

Straight and true

Wall and roof frames made from TRUECORE® steel are precision engineered to be dimensionally accurate.

They won’t shrink, twist or warp, reducing the likelihood of problems such as cracking cornices, jamming doors, sticking windows or wavy rooflines.

A healthier home

Because it requires no additional chemical treatments, steel framing is recognised both here and overseas as a healthy home alternative for people suffering from asthma.

Design flexibility

Steel framing encourages home designers to think outside the square and make the most of available space.

It lends itself perfectly to innovative designs and non-conventional roof lines, helping to create distinctive, highly individualised homes.

In particular, the high strength-to-weight ratio of steel roof framing allows for longer spans, creating larger, more open living areas. And because it’s steel, it measures up against increasingly stringent building and fire regulations.

Treading lightly on the earth

Steel framing made from TRUECORE® steel delivers a range of environmental benefits, both immediate and long term.

The relative light weight of steel framing, combined with its design versatility and flexibility, means a steel-framed house can be built with minimal site impact.

Quite literally, it ‘touches the earth lightly’.

This is especially apparent on sloping and difficult sites where it can be used in conjunction with suspended flooring systems, reducing the need to cut into the site and thus leaving a much smaller imprint.

And because steel frames are fabricated off-site to exact specifications, there is minimal cutting and wastage onsite – making for a cleaner building environment.

A recyclable material

Steel is one of the most recycled materials on the planet.

Not only is TRUECORE® steel 100 per cent recyclable, it is made with a component of recycled steel.