MESIN SENAI PIPA THREADING MACHINE 3″ KSU N80A-C

threading-machine-ksu-n80a

MADE IN KOREA

MESIN SENAI PIPA THREADING MACHINE WITH AUTO DIE HEAD  3″ KSU N80A-C

  • Light and strong due to body and base are united as a one.
    High working speed and rapid changing of die head and Dies.
  • Self-lubricasting die head.
  • Uses auto-stop carbon brushes to prevent damage to the motor.

 

Features
  • Powerfull brush motor
  • High degrees of precession and accuracy
  • Light and strong merged as one piece cast steel body
  • High work speed and rapid changing of the die head and dies
Specifications
Model KSU N 80A(3″) – C
Capacity ½” – 3″ (Threading. Cutting. Reaming)
Voltage AC 220 V (50/60Hz)
Motor Single-phase series motor (750W)
Rotation 25 rpm(60Hz)
L x H x W 745 (L) × 450 (W) × 450 (H)mm
Weight 67 kg (147.4 lbs)

 

 

 

 

 

 

 

 

MESIN SENAI PIPA THREADING MACHINE 3" KSU N80A-C

threading-machine-ksu-n80a
MADE IN KOREA
MESIN SENAI PIPA THREADING MACHINE WITH AUTO DIE HEAD  3″ KSU N80A-C

  • Light and strong due to body and base are united as a one.
    High working speed and rapid changing of die head and Dies.
  • Self-lubricasting die head.
  • Uses auto-stop carbon brushes to prevent damage to the motor.

 

Features
  • Powerfull brush motor
  • High degrees of precession and accuracy
  • Light and strong merged as one piece cast steel body
  • High work speed and rapid changing of the die head and dies
Specifications
Model KSU N 80A(3″) – C
Capacity ½” – 3″ (Threading. Cutting. Reaming)
Voltage AC 220 V (50/60Hz)
Motor Single-phase series motor (750W)
Rotation 25 rpm(60Hz)
L x H x W 745 (L) × 450 (W) × 450 (H)mm
Weight 67 kg (147.4 lbs)

 
 
 
 
 
 
 
 

MESIN SENAI PIPA THREADING MACHINE 2″ KSU N50A

threading-machine-ksu-n50a

MADE IN KOREA

MESIN SENAI PIPA THREADING MACHINE WITH AUTO DIE HEAD 2″ KSU N50A

  • Light and strong due to body and base are united as a one.
    High working speed and rapid changing of die head and Dies.
  • Self-lubricasting die head.
  • Uses auto-stop carbon brushes to prevent damage to the motor.

 

Features
  • Powerfull brush motor
  • High degrees of precession and accuracy
  • Light and strong merged as one piece cast steel body
  • High work speed and rapid changing of the die head and dies
Specifications
Model KSU N 50A (2″)
Capacity ½” – 2″ (Threading. Cutting. Reaming)
Voltage AC 220 V (50/60Hz)
Motor Single-phase series motor (750W)
Rotation 32 rpm(60Hz)
L x H x W 570 (L) × 470 (W) × 420 (H)mm
Weight 54 kg (1118.8 lbs)

 

 

 

 

 

 

MESIN SENAI PIPA THREADING MACHINE 2" KSU N50A

threading-machine-ksu-n50a
MADE IN KOREA
MESIN SENAI PIPA THREADING MACHINE WITH AUTO DIE HEAD 2″ KSU N50A

  • Light and strong due to body and base are united as a one.
    High working speed and rapid changing of die head and Dies.
  • Self-lubricasting die head.
  • Uses auto-stop carbon brushes to prevent damage to the motor.

 

Features
  • Powerfull brush motor
  • High degrees of precession and accuracy
  • Light and strong merged as one piece cast steel body
  • High work speed and rapid changing of the die head and dies
Specifications
Model KSU N 50A (2″)
Capacity ½” – 2″ (Threading. Cutting. Reaming)
Voltage AC 220 V (50/60Hz)
Motor Single-phase series motor (750W)
Rotation 32 rpm(60Hz)
L x H x W 570 (L) × 470 (W) × 420 (H)mm
Weight 54 kg (1118.8 lbs)

 
 
 
 
 
 

MESIN SENAI PIPA THREADING MACHINE 4″ KSU N100A

pipe-threading-machine-ksu-n-100

 

MADE IN KOREA

MESIN SENAI PIPE THREADING MACHINE WITH AUTO DIE HEAD 4″  KSU N-100A

 

  • Quick-change pipe cutter
    increases work efficiency
  • Built-in toll box is convenient for on-site work
  • Large-capacity scrap catcher

 

Features
  • 3 speed transmission makes the work faster and efficient
  • High speed thread processing (it only 100 sec. to make pipe thread in 4” pipe)
  • Thread sizes, lengths and depths can be easily adjusted and microfine adjustment of the thread diameter can be done.
  • The quick-change pipe cutter increases the work efficiency
  • Large-capacity scrap catcher

 

Specifications
Capacity ½ – 4″ (Threading. Cutting. Reaming)
Volatage AC 220 V (60Hz)
Motor Single-phase 1100 W condenser motor
Rotation Speed 3 step : 12, 23, 40 r.p.m
Net Weight 159 kg (350 lbs)
Dimension 940 (L) × 640 (W) × 620 (H)mm
½”~2” Self-opening die head (1SET), 2½“~4” Profiling die head (1SET)

 

 

 

 

 

MESIN SENAI PIPA THREADING MACHINE 4" KSU N100A

pipe-threading-machine-ksu-n-100
 
MADE IN KOREA
MESIN SENAI PIPE THREADING MACHINE WITH AUTO DIE HEAD 4″  KSU N-100A
 

  • Quick-change pipe cutter
    increases work efficiency
  • Built-in toll box is convenient for on-site work
  • Large-capacity scrap catcher

 

Features
  • 3 speed transmission makes the work faster and efficient
  • High speed thread processing (it only 100 sec. to make pipe thread in 4” pipe)
  • Thread sizes, lengths and depths can be easily adjusted and microfine adjustment of the thread diameter can be done.
  • The quick-change pipe cutter increases the work efficiency
  • Large-capacity scrap catcher

 

Specifications
Capacity ½ – 4″ (Threading. Cutting. Reaming)
Volatage AC 220 V (60Hz)
Motor Single-phase 1100 W condenser motor
Rotation Speed 3 step : 12, 23, 40 r.p.m
Net Weight 159 kg (350 lbs)
Dimension 940 (L) × 640 (W) × 620 (H)mm
½”~2” Self-opening die head (1SET), 2½“~4” Profiling die head (1SET)

 
 
 
 
 

FLAT VICE BAND SAW KSU-180FV

 
ksu-180fv
 
 MADE IN KOREA

 Flat vice band saw KSU-180FV Safe and No pollution
· No sparks, noise and dusts. Rapid speed improves work efficiency.
  • KSI Band saw is built on base, on which either a flat vice or a chain vice can be mounted depending on its usage.


  • Usage : Cutting for a steel pipe, water-supply pipe, lining steel pipe, cable pipe, PVC pipe, resin pipe, cast iron pipe, stainless steel pipe, steel material, rectanggular pipe, round bar, aluminum, etc.

 

Specifications
Model KSU-180CV
Cutting Pipe(optional Chain Vice) Ø180mm □150mm
Cutting Round bar Ø80mm
Angel Cut Ø77mm □75mm
No load speed 450 rpm
Motor Condenser motor, Voltage made to order 300W, 60Hz
Pully rotation 84rpm(60Hz)
L x H x W 990 (L) × 400 (W) × 400 (H)mm
Weight 50.5kg

 
 
 
 
 

CHAIN VICE BAND SAW KSU-180CV

ksu-180cv
 
MADE IN KOREA
 
Chain vice band saw KSU-180CV
Safe and No pollution
· No sparks, noise and dusts. Rapid speed improves work efficiency.
 

  • KSI Band saw is built on base, on which either a flat vice or a chain vice can be mounted depending on its usage.


  • Usage : Cutting for a steel pipe, water-supply pipe, lining steel pipe, cable pipe, PVC pipe, resin pipe, cast iron pipe, stainless steel pipe, steel material, rectanggular pipe, round bar, aluminum, etc.
Features
  • Strong and quick fixing function with rapid winding
  • Possible to cut small objectives to the desired angles
  • Easy to exchange blades depending on the cutting materials and to adjust the load velocity accordingly
  • Possible to cut right angle due to improved cutting precision
  • Possible to cut to 45” angle with the flat vice
  • Possible to cut bundle of the same standard materials at one go
Specifications
Model KSU-180CV
Cutting Pipe Ø180mm □150mm
Cutting Round Bar(optional Flat Vice) Ø80mm
No load speed 450 rpm
Motor Condenser motor, Voltage made to order 300W, 60Hz
Pully rotation 84rpm(60Hz)
L x H x W 990 (L) × 400 (W) × 400 (H)mm
Weight 43.8kg

 

Features
Flat vice-mounted KSU Bans saw (optional) Possible to cut small objectives to the desired angles.
Possible to cut right angle due to imporved cutting precision. It can be easily fixed.
Easy to exchange blades depending on the cutting materials, and to adjust the load velocity accordingly. Strong and Quick fixing function with rapid winding.
Spare brade include in cover Possible to cut a bundle of the same standard materials at one go (Model:KSU-180CV)

 
 
 
 
 

PORTABLE BAND SAW KSU-125

 
ksu-125-portable-band-saw
MADE IN KOREA
 
SUPER-LIGHT PORTABLE BAND SAW KSU-125

Features
  • Super-Light Portable Type
  • Adjustable blade guide handle
  • Automatic Cut-off limit switch
  • Electronic magnetic switch
  • Possible to cut to 60” angle
  • Spring setting for manual or auto
  • Made in Korea
Specifications
Model KSU-125
Cutting 90″ Ø125mm / □120 x 120mm
Cutting 45″ Ø70mm / □120 x 70mm
Cutting 60″ Ø35mm / □65 x 35mm
Motor (DC) 300 W
Blade Size 13 x 0.65 x 1.440 mm
Blade Speed 23-75 mpm
Dimension 680 (L) × 370 (W) × 400 (H)
N.W / G.W 22kg / 25kg

 
 

Usage
  • Cutting for a steel pipe, water-supply pipe, lining steel pipe, cable pipe, PVC pipe, resin pipe, cast iron pipe,
    stainless steel pipe, steel material, rectangular pipe, round bar, aluminum, etc.

 

Features
Light Base Frame. Allowing it to adjust the blade guide depending on the sizes of the materials.
Automatic ON/OFF fuction. Equipped electronic magnetic switch allows a user and machine keep safe.
Possible to cut various angles up to 60° Select either of the two options ( manual or automatic cutting ) before using.
Possible to cut max. 125mm and a bundle of the material at one go.

 
ksu-125